MURB1J_R1_00001

PMURA1J / MURB1J / MUR160K SUPERFAST RECOVERY RECTIFIERS Voltage 600 V Current 1A MUR160K DO-41 Features       Superfast recovery times-epitaxial construction Low forward voltage, high current capability Hermetically sealed. Low leakage High surge capacity Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound  Lead free in compliance with EU RoHS 2.0  Green molding compound as per IEC 61249 standard (SMA)(SMB) MURA1J SMA Mechanical Data        Case: Molded plastic, SMA, SMB, DO-41 Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color Band denotes cathode end SMA Approx. Weight: 0.0239 ounces, 0.068 grams SMB Approx. Weight: 0.0032 ounces, 0.092 grams DO-41 Approx. Weight: 0.012 ounces, 0.034 grams Marking: Part number 1 Cathode MURB1J SMB 2 Anode o Maximum Ratings (TA=25 C unless otherwise noted) PARAMETER SYMBOL LIMIT UNIT Maximum repetitive peak reverse voltage VRRM 600 V Maximum rms voltage VRMS 420 V VR 600 V IF(AV) 1 A IFSM 30 A Maximum forward voltage at 1A VF 1.25 V Maximum dc reverse current at rated dc blocking voltage IR 5 A TJ, TSTG -55 to +175 Maximum dc blocking voltage Maximum average forward current Peak forward surge current : 8.3ms single half sinewave superimposed on rated load Operating and storage temperature range February 21,2019-REV.04 o C Page 1 PMURA1J / MURB1J / MUR160K o Maximum Ratings (TA=25 C unless otherwise noted) PARAMETER SYMBOL LIMIT UNIT ns Maximum reverse recovery time (Note 4) TRR 50 Typical thermal resistance SMA(Note 3) RθJA 150 SMB(Note 3) RθJA 135 SMA(Note 1) RθJC 25 SMB(Note 1) RθJC 20 DO-41(Note 2) RθJL 55 o C/W 2 Note : 1. Mounted on a FR4 PCB, single-sided copper, with 100cm copper pad area 2.The testing condition of the thermal resistance (junction to lead) is based on 10 mm lead length between two 10cm x 10cm FR4 PCB single-sided copper pad 3. Mounted on a FR4 PCB, single-sided copper, mini pad IF, Forward Current (A) 1.2 1 0.8 0.6 SMB SMA 0.4 DO-41 0.2 0 0 25 50 75 100 125 150 175 CJ, Junction Capacitance (pF) 4. Reverse Recovery Test Conditions : IF=0.5A, IR=1A, Recover to 0.25A 100 10 1 1 100 VR, Reverse Bias Voltage (V) TC, Case Temperature (°C) Fig.1 Forward Current Derating Curve Fig.2 Typical Junction Capacitance 10 100 IF, Forward Current (A) IR, Reverse Current (mA) 10 TJ = 150°C 10 TJ = 125°C 1 0.1 TJ = 75°C 0.01 TJ = 25°C 0.001 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig.3 Typical Reverse Characteristics February 21,2019-REV.04 1 TJ = 150°C TJ = 125°C 0.1 TJ = 75°C TJ = 25°C 0.01 0.001 0 0.5 1 1.5 VF, Forward Voltage (V) Fig.4 Typical Forward Characteristics Page 2 PMURA1J / MURB1J / MUR160K PART NO PACKING CODE VERSION Part No Packing Code Package Type Packing type Marking Version MUR160K_AY_00001 DO-41 5K pcs/ TB 52mm MUR160K Halogen free MUR160K_AY_10001 DO-41 5K pcs/ TB 52mm MUR160K RoHS MURA1J_R1_00001 SMA 1.8K pcs / 7" reel MURA1J Halogen free MURB1J_R1_00001 SMB 0.8K pcs / 7" reel MURB1J Halogen free MOUNTING PAD LAYOUT February 21,2019-REV.04 Page 3 PMURA1J / MURB1J / MUR160K 1.0(25.4)MIN. 0.205(5.2) 0.160(4.1) 0.034(0.86) 0.028(0.71) February 21,2019-REV.04 0.107(2.7) 0.080(2.0) Page 4 PMURA1J / MURB1J / MUR160K Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. February 21,2019-REV.04 Page 5