MURC5J_R1_00001

PMURC5J / MUR560M / MUR560S SUPERFAST RECOVERY RECTIFIERS Voltage 600 V Current 5A MUR560M DO-201AD Features  Silicon epitaxial high-speed diodes  Soft recovery characteristics  Low forward voltage, high current capability  Hermetically sealed.  Low leakage  High surge capacity MURC5J SMC  Lead free in compliance with EU RoHS 2.0  Green molding compound as per IEC 61249 standard Mechanical Data MUR560S TO-252  Case: Molded plastic, SMC, DO-201AD, TO-252  Terminals: Solder plated, solderable per MIL-STD-750, Method 2026  Polarity: Color Band denotes cathode end  SMC Approx. Weight: 0.0082 ounces, 0.2325 grams  DO-201AD Approx. Weight: 0.04 ounces, 1.142 grams  TO-252 Weight: 0.0104 ounces, 0.297 grams  Marking: Part number 1 Cathode 2 Anode o Maximum Ratings (TA=25 C unless otherwise noted) PARAMETER SYMBOL LIMIT UNIT Maximum repetitive peak reverse voltage VRRM 600 V Maximum rms voltage VRMS 420 V VR 600 V IF(AV) 5 110 110 80 A Maximum dc blocking voltage Maximum average forward current Peak forward surge current : 8.3ms single half sinewave superimposed on rated load SMC DO-201AD TO-252 IFSM A Maximum forward voltage at 5A VF 1.3 V Maximum dc reverse current at rated dc blocking voltage IR 5 A TRR RθJA RθJC RθJL RθJC 50 125 14 24 6.5 ns TJ, TSTG -55 to +175 Maximum reverse recovery time Typical thermal resistance (Note 5) SMC(Note 3) SMC(Note 1) DO-201AD(Note 2) TO-252(Note 4) Operating and storage temperature range o C/W o C 2 Note : 1. Mounted on a FR4 PCB, single-sided copper, with 100cm copper pad area 2. The testing condition of the thermal resistance (junction to lead) is based on 10 mm lead length between two 10cm x 10cm × 0. 5mm copper pad 3. Mounted on a FR4 PCB, single-sided copper, mini pad 4. Mounted on 10cm x 10cm x 1mm copper pad area 5. Reverse Recovery Test Conditions : IF=0.5A, IR=1A, Recover to 0.25A May 2,2018-REV.03 Page 1 IF, Forward Current (A) 6 5 4 3 DO-201AD 2 SMC 1 TO-252 0 0 25 50 75 100 125 150 175 TC, Case Temperature (°C) CJ, Junction Capacitance (pF) PMURC5J / MUR560M / MUR560S Fig.1 Forward Current Derating Curve 10 1 1 10 100 VR, Reverse Bias Voltage (V) Fig.2 Typical Junction Capacitance 10 10 1 TJ = 125°C TJ = 150°C TJ = 75°C 0.1 0.01 TJ = 25°C 0.001 10 20 30 40 50 60 70 80 90 100 Percent of Rated Peak Reverse Voltage (%) Fig.3 Typical Reverse Characteristics May 2,2018-REV.03 IF, Forward Current (A) 100 IR, Reverse Current (mA) 100 TJ = 150°C 1 TJ = 75°C TJ = 125°C 0.1 TJ = 25°C 0.01 0 0.5 1 1.5 VF, Forward Voltage (V) Fig.4 Typical Forward Characteristics Page 2 PMURC5J / MUR560M / MUR560S PART NO PACKING CODE VERSION PART NO PACKING CODE Package Type Packing type Marking Version MUR560M_AY_00001 DO-201AD 1.25K pcs / TB 52mm MUR560M Halogen free MUR560S_L2_00001 TO-252 3K pcs / 13" rel MUR560S Halogen free MURC5J_R1_00001 SMC 0.8K pcs / 7" reel MURC5J Halogen free MOUNTING PAD LAYOUT May 2,2018-REV.03 Page 3 0.052(1.3) 0.048(1.2) 1.0(25.4)MIN. 0.375(9.5) 0.285(7.2) 1.0(25.4)MIN. PMURC5J / MUR560M / MUR560S May 2,2018-REV.03 0.210(5.3) 0.188(4.8) Page 4 PMURC5J / MUR560M / MUR560S Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. May 2,2018-REV.03 Page 5