P4SMA110CAS_R1_00001

P4SMA10AS ~ P4SMA250CAS Series Surface Mount Transient Voltage Suppressor Voltage 10~250 V SMA 400 W Power Features  For surface mounted applications in order to optimize board space.  Package suitable for automated handling  Low inductance  High temperature soldering : 260oC/10 seconds at terminals  Lead free in compliance with EU RoHS 2.0  Green molding compound as per IEC 61249 standard Mechanical Data  Case: Molded plastic, SMA  Terminals : Solderable per MIL-STD-750, Method 2026  Approx. Weight: 0.0024 ounces, 0.068 grams Maximum Ratings and Thermal Characteristics (TA = 25 oC unless otherwise noted) PARAMETER SYMBOL Peak Pulse Power Dissipation(tp = 10 / 1000 us) Peak Pulse Current on tp = 10 / 1000 us waveform(Fig.2) Power Dissipation on Infinite Heat Sink at T L = 50 oC ESD IEC61000-4-2(Air) Typical Thermal Resistance Junction to Ambient Storage Temperature Range October 7,2021 UNITS 400 W IPPM (1) See table 1 A PD 3.3 W PPP (1) (2) VESD ESD IEC61000-4-2(Contact) Operating Junction Temperature Range LIMIT ±30 ±30 kV RθJA (3) 150 oC/W TJ -55~150 oC TSTG -55~150 oC P4SMA10AS_SERIES-REV.01 Page 1 P4SMA10AS ~ P4SMA250CAS Series Electrical Characteristics (TA = 25 oC unless otherwise noted) IR VBR Part Number UNI VRWM BI VC@IPP @VRWM Marking Code Min. Max. IT uA V V V mA UNI BI V A UNI BI 400W Transient Voltage Suppressor P4SMA10AS P4SMA10CAS 8.55 9.5 10.5 1 10 20 14.5 29 TZU VZF P4SMA11AS P4SMA11CAS 9.4 10.5 11.6 1 5 10 15.6 27 TZV VZG P4SMA12AS P4SMA12CAS 10.2 11.4 12.6 1 1 1 16.7 25 TZW VZH P4SMA13AS P4SMA13CAS 11.1 12.4 13.7 1 1 1 18.2 23 TZX VZJ P4SMA15AS P4SMA15CAS 12.8 14.3 15.8 1 1 1 21.2 20 TZY VZK P4SMA16AS P4SMA16CAS 13.6 15.2 16.8 1 1 1 22.5 19 TZZ VZL P4SMA18AS P4SMA18CAS 15.3 17.1 18.9 1 1 1 25.2 17 UZA VZM P4SMA20AS P4SMA20CAS 17.1 19 21 1 1 1 27.7 15 UZB VZN P4SMA22AS P4SMA22CAS 18.8 20.9 23.1 1 1 1 30.6 14 UZC VZP P4SMA24AS P4SMA24CAS 20.5 22.8 25.2 1 1 1 33.2 13 UZD VZQ P4SMA27AS P4SMA27CAS 23.1 25.7 28.4 1 1 1 37.5 11.2 UZE VZR P4SMA30AS P4SMA30CAS 25.6 28.5 31.5 1 1 1 41.4 10 UZF VZS P4SMA33AS P4SMA33CAS 28.2 31.4 34.7 1 1 1 45.7 9 UZG VZT P4SMA36AS P4SMA36CAS 30.8 34.2 37.8 1 1 1 49.9 8.4 UZH VZU P4SMA39AS P4SMA39CAS 33.3 37.1 41 1 1 1 53.9 7.8 UZJ VZV P4SMA43AS P4SMA43CAS 36.8 40.9 45.2 1 1 1 59.3 7.1 UZK VZW P4SMA47AS P4SMA47CAS 40.2 44.7 49.4 1 1 1 64.8 5 UZL VZX P4SMA51AS P4SMA51CAS 43.6 48.5 53.6 1 1 1 70.1 6 UZM VZY P4SMA56AS P4SMA56CAS 47.8 53.2 58.8 1 1 1 77 5.5 UZN VZZ P4SMA62AS P4SMA62CAS 53 58.9 65.1 1 1 1 85 5 UZP WZA P4SMA68AS P4SMA68CAS 58.1 64.6 71.4 1 1 1 92 4.6 UZQ WZB P4SMA75AS P4SMA75CAS 64.1 71.3 78.8 1 1 1 103 4.1 UZR WZC P4SMA82AS P4SMA82CAS 70.1 77.9 86.1 1 1 1 113 3.7 UZS WZD P4SMA91AS P4SMA91CAS 77.8 86.5 95.5 1 1 1 125 3.4 UZT WZE P4SMA100AS P4SMA100CAS 85.5 95 105 1 1 1 137 3.1 UZU WZF P4SMA110AS P4SMA110CAS 94 105 116 1 1 1 152 2.8 UZV WZG P4SMA120AS P4SMA120CAS 102 114 126 1 1 1 165 2.5 UZW WZH P4SMA130AS P4SMA130CAS 111 124 137 1 1 1 179 2.3 UZX WZJ P4SMA150AS P4SMA150CAS 128 143 158 1 1 1 207 2 UZY WZK P4SMA160AS P4SMA160CAS 136 152 168 1 1 1 219 1.9 UZZ WZL October 7,2021 P4SMA10AS_SERIES-REV.01 Page 2 P4SMA10AS ~ P4SMA250CAS Series Electrical Characteristics (TA = 25 oC unless otherwise noted) IR VBR Part Number UNI VRWM BI VC@IPP @VRWM Marking Code Min. Max. IT uA V V V mA UNI BI V A UNI BI 400W Transient Voltage Suppressor P4SMA170AS P4SMA170CAS 145 162 179 1 1 1 234 1.8 VZA WZM P4SMA180AS P4SMA180CAS 154 171 189 1 1 1 246 1.7 VZB WZN P4SMA200AS P4SMA200CAS 171 190 210 1 1 1 274 1.5 VZC WZP P4SMA220AS P4SMA220CAS 185 209 231 1 1 1 328 1.2 VZD WZQ P4SMA250AS P4SMA250CAS 214 237 263 1 1 1 344 1.2 VZE WZR Notes : 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25°C per Fig.2. 2. Mounted on 100cm2 copper pads to each terminal. 3. Mounted on a FR4 PCB, single-sided copper, standard footprint. October 7,2021 P4SMA10AS_SERIES-REV.01 Page 3 P4SMA10AS ~ P4SMA250CAS Series PPPM - Peak Pulse Power(kW) 10 Non-Repetitive Pulse Waveform Shown in Figure 3 TA = 25°C 1 0.1 1 10 100 1,000 10,000 PPP or IPP Derating Percentage (%) TYPICAL CHARACTERISTIC CURVES 110 100 90 80 70 60 50 40 30 20 10 0 0 25 50 Fig.1 Pulse Power Rating Curve 100 125 150 175 200 Fig.2 Derating Curve 10,000 110 100 90 80 70 60 50 40 30 20 10 0 CJ - Junction Capacitance(pF) Percent of IPP (%) 75 TA - Ambient Temperature(℃) td - Pulse Width(us) 50% of IPP @1000us Rise time 10~90%-10us 0 1 2 3 Time (ms) Fig.3 10/1000us Pulse Waveform October 7,2021 4 Uni-direconal VR = 0 V 1,000 100 Bi-direconal VR = 0 V 10 1 1 10 100 1000 VRWM - Reverse Stand-off Voltage (V) Fig.4 Typical Capacitance P4SMA10AS_SERIES-REV.01 Page 4 P4SMA10AS ~ P4SMA250CAS Series Part No. Packing Code Version Part No. Packing Code Package Type Packing Type Marking Version P4SMAxxxxAS_R1_00001 SMA 1.8K pcs / 7” reel See Table Halogen free RoHS compliant Packaging Information & Mounting Pad Layout SMA Dimension October 7,2021 Unit: inch(mm) SMA Pad Layout P4SMA10AS_SERIES-REV.01 Unit: inch(mm) Page 5 P4SMA10AS ~ P4SMA250CAS Series Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. October 7,2021 P4SMA10AS_SERIES-REV.01 Page 6