P4SMA39CA_R1_00001

P4SMA6.8A ~ P4SMA250CA Series SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR POWER 400 Watt 6.8 to 250 Volt BREAK DOWN VOLTAGE FEATURES • For surface mounted applications in order to optimize board space • Glass passivated junction • Low inductance • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • High temperature soldering : 260°C /10 seconds at terminals • ESD IEC-61000-4-2 Air + 30kV, Contact + 30kV • Lead free in compliance with EU RoHS 2.0 • Green molding compound as per IEC 61249 standard MECHANICAL DATA • Case : JEDEC DO-214AC,Molded plastic over passivated junction. • Terminals : Solder plated,solderable per MIL-STD-750, Method 2026 • Polarity : Color band denotes cathode end • Standard Packaging : 12mm tape (EIA-481) • Approx. Weight : 0.0679 grams DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use CA Suffix for types P4SMA6.8CA thru types P4SMA250CA Electrical characteristics apply in both directions. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Rating Symbol Value Units PPP 400 Watts VESD +30 +30 kV Peak Forward Surge Current per Fig.5 (Notes 3) IFSM 40 Amps Peak Pulse Current on tp=10/1000μs waveform (Notes 1)Fig.2 IPPM see Table 1 Amps Typical Thermal Resistance Junction to Air (Notes 2) RθJA 70 Operating Junction and Storage Temperature Range TJ,TSTG -55 to +150 Peak Pulse Power Dissipation on TA = 25OC (Notes 1,2,5, Fig.1) ESD IEC-61000-4-2 (Air) ESD IEC-61000-4-2 (Contact) O C/ W O C NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25 OC per Fig. 2. 2. Mounted on 5mm 2 copper pads to each terminal. 3. 8.3ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minutes maximum. 4. Lead temperature at 75 OC = T L. 5. Peak pulse power wavef orm is 10/1000 μs. 6. A transient suppressor is selected according to the working peak reverse voltage (V RWM), which should be equal to or greater than the DC or continuous peak operating voltage level. August 24,2022 P4SMA6.8A_SERIES-REV.12 PAGE . 1 P4SMA6.8A ~ P4SMA250CA Series Reverse Stand-off Voltage Part Number Breakdown Voltage Test Current VBR @ I T IT Mi n. Ma x. V V V 5.8 6.45 BI Max. Peak Clamp Pulse Voltage Current 10/1000μs 10/1000μs Marking Code I R @ V RWM VRWM (Note 6) UNI Reverse Leakage VC @ I PP I PP uA V A UNI BI 1000 2000 10.5 40 MZB NZB UNI BI mA uA 7.14 10 400W Transient Voltage Suppressor P4SMA6.8A P4SMA6.8CA P4SMA7.5A P4SMA7.5CA 6.4 7.13 7.88 10 500 1000 11.3 37 MZD NZD P4SMA8.2A P4SMA8.2CA 7.02 7.79 8.61 10 200 400 12.1 35 MZF NZF P4SMA9.1A P4SMA9.1CA 7.78 8.65 9.5 1 50 100 13.4 31 MZH NZH P4SMA10A P4SMA10CA 8.55 9.5 10.5 1 10 20 14.5 29 MZK NZK P4SMA11A P4SMA11CA 9.4 10.5 11.6 1 5 10 15.6 27 MZM NZM P4SMA12A P4SMA12CA 10.2 11.4 12.6 1 1 1 16.7 25 MZP NZP P4SMA13A P4SMA13CA 11.1 12.4 13.7 1 1 1 18.2 23 MZR NZR P4SMA15A P4SMA15CA 12.8 14.3 15.8 1 1 1 21.2 20 MZT NZT P4SMA16A P4SMA16CA 13.6 15.2 16.8 1 1 1 22.5 19 MZV NZV P4SMA18A P4SMA18CA 15.3 17.1 18.9 1 1 1 25.2 17 MZX NZX P4SMA20A P4SMA20CA 17.1 19 21 1 1 1 27.7 15 MZZ NZZ P4SMA22A P4SMA22CA 18.8 20.9 23.1 1 1 1 30.6 14 MXB NXB P4SMA24A P4SMA24CA 20.5 22.8 25.2 1 1 1 33.2 13 MXD NXD P4SMA27A P4SMA27CA 23.1 25.7 28.4 1 1 1 37.5 11.2 MXF NXF P4SMA30A P4SMA30CA 25.6 28.5 31.5 1 1 1 41.4 10 MXH NXH P4SMA33A P4SMA33CA 28.2 31.4 34.7 1 1 1 45.7 9 MXK NXK P4SMA36A P4SMA36CA 30.8 34.2 37.8 1 1 1 49.9 8.4 MXM NXM P4SMA39A P4SMA39CA 33.3 37.1 41 1 1 1 53.9 7.8 MXP NXP P4SMA43A P4SMA43CA 36.8 40.9 45.2 1 1 1 59.3 7.1 MXR NXR P4SMA47A P4SMA47CA 40.2 44.7 49.4 1 1 1 64.8 5 MXT NXT P4SMA51A P4SMA51CA 43.6 48.5 53.6 1 1 1 70.1 6 MXV NXV P4SMA56A P4SMA56CA 47.8 53.2 58.8 1 1 1 77 5.5 MXX NXX P4SMA62A P4SMA62CA 53 58.9 65.1 1 1 1 85 5 MXZ NXZ P4SMA68A P4SMA68CA 58.1 64.6 71.4 1 1 1 92 4.6 MYB NYB P4SMA75A P4SMA75CA 64.1 71.3 78.8 1 1 1 103 4.1 MYD NYD P4SMA82A P4SMA82CA 70.1 77.9 86.1 1 1 1 113 3.7 MYF NYF P4SMA91A P4SMA91CA 77.8 86.5 95.5 1 1 1 125 3.4 MYH NYH P4SMA100A P4SMA100CA 85.5 95 105 1 1 1 137 3.1 MYK NYK P4SMA110A P4SMA110CA 94 105 116 1 1 1 152 2.8 MYM NYM P4SMA120A P4SMA120CA 102 114 126 1 1 1 165 2.5 MYP NYP P4SMA130A P4SMA130CA 111 124 137 1 1 1 179 2.3 MYR NYR P4SMA150A P4SMA150CA 128 143 158 1 1 1 207 2 MYT NYT P4SMA160A P4SMA160CA 136 152 168 1 1 1 219 1.9 MYV NYV P4SMA170A P4SMA170CA 145 162 179 1 1 1 234 1.8 MYX NYX P4SMA180A P4SMA180CA 154 171 189 1 1 1 246 1.7 MYZ NYZ P4SMA200A P4SMA200CA 171 190 210 1 1 1 274 1.5 MWB NWB P4SMA220A P4SMA220CA 185 209 231 1 1 1 328 1.2 MWD NWD P4SMA250A P4SMA250CA 214 237 263 1 1 1 344 1.2 MWF NWF August 24,2022 P4SMA6.8A_SERIES-REV.12 PAGE . 2 10 Non-Repetitive Pulse Waveform Shown in Figure 3 TA = 25°C 1 0.1 1 10 100 1,000 10,000 td - Pulse Width(us) PPP or IPP Derating Percentage (%) PPPM - Peak Pulse Power(kW) P4SMA6.8A ~ P4SMA250CA Series 110 100 90 80 70 60 50 40 30 20 10 0 0 25 50 75 100 125 150 175 200 TA - Ambient Temperature(°C) Fig.1 Pulse Power Rating Curve Fig.2 Derating Curve Percent of IPP (%) CJ - Junction Capacitance(pF) 10,000 110 100 90 80 70 60 50 40 30 20 10 0 50% of IPP@1000us Rise time 10~90%-10us 0 1 2 Time (ms) 3 4 Fig.3 10/1000us Pulse Waveform August 24,2022 Uni-direconal VR = 0 V 1,000 100 Bi-direconal VR = 0 V 10 1 1 10 100 1000 VRWM - Reverse Stand-off Voltage (V) Fig.4 Typical Capacitance P4SMA6.8A_SERIES-REV.12 PAGE . 4 P4SMA6.8A ~ P4SMA250CA Series MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 7.5K per 13" plastic Reel T/R - 1.8K per 7" plastic Reel August 24,2022 P4SMA6.8A_SERIES-REV.12 PAGE . 5 P4SMA6.8A ~ P4SMA250CA Series Part No._packing code_Version P4SMA6.8A_R1_00001 P4SMA6.8A_R2_00001 For example : RB500V-40_R2_00001 ˙Serial number ˙ Part No. ˙Version code means Halogen free RoHS compliant ˙Packing size code means 13" ˙Packing type means T/R Packing Code XX Serial number XXXX Version Code X Packing type 1st Code Packing size code 2nd Code HSF Level 1st Code 2nd~5th Code Tape and Ammunition Box (T/B) A N/A 0 Halogen free RoHS compliant 0 serial number Tape and Reel (T/R) R 7" 1 RoHS compliant 1 serial number Bulk Packing (B/P) B 13" 2 Tube Packing (T/P) T 26mm X S 52mm Y L PANASERT T/B CATHODE UP (PBCU) U F PANASERT T/B CATHODE DOWN (PBCD) D Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING August 24,2022 P4SMA6.8A_SERIES-REV.12 PAGE . 6 P4SMA6.8A ~ P4SMA250CA Series Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. August 24,2022 P4SMA6.8A_SERIES-REV.12 PAGE . 7