P4SMAJ36CAS_R1_00001

P4SMAJ8.5AS ~ P4SMAJ220CAS Series Surface Mount Transient Voltage Suppressor Voltage 8.5~220 V SMA 400 W Power Features  For surface mounted applications in order to optimize board space.  Package suitable for automated handling  Low inductance  High temperature soldering : 260oC/10 seconds at terminals  Lead free in compliance with EU RoHS 2.0  Green molding compound as per IEC 61249 standard Mechanical Data  Case : Molded plastic, SMA  Terminals : Solderable per MIL-STD-750, Method 2026  Approx. Weight : 0.0024 ounces, 0.0679 grams Maximum Ratings and Thermal Characteristics (TA = 25 oC unless otherwise noted) PARAMETER SYMBOL Peak Pulse Power Dissipation(tp = 10 / 1000 us) Peak Pulse Current on tp = 10 / 1000 us waveform(Fig.2) Power Dissipation on Infinite Heat Sink at T L = 50 oC ESD IEC61000-4-2(Air) Typical Thermal Resistance Junction to Ambient Storage Temperature Range October 7,2021 UNITS 400 W IPPM (1) See table 1 A PD 3.3 W PPP (1) (2) VESD ESD IEC61000-4-2(Contact) Operating Junction Temperature Range LIMIT ±30 ±30 kV RθJA (3) 150 oC/W TJ -55~150 oC TSTG -55~150 oC P4SMAJ8.5AS_SERIES-REV.01 Page 1 P4SMAJ8.5AS ~ P4SMAJ220CAS Series Electrical Characteristics (TA = 25 oC unless otherwise noted) IR VBR Part Number UNI VRWM BI VC@IPP @VRWM Marking Code Min. Max. IT uA V V V mA UNI BI V A UNI BI 400W Transient Voltage Suppressor P4SMAJ8.5AS P4SMAJ8.5CAS 8.5 9.44 10.4 1 10 20 14.4 27.7 PZA RZX P4SMAJ9.0AS P4SMAJ9.0CAS 9 10 11.1 1 5 5 15.4 26 PZB RZY P4SMAJ10AS P4SMAJ10CAS 10 11.1 12.3 1 5 5 17 23.5 PZC RZZ P4SMAJ11AS P4SMAJ11CAS 11 12.2 13.5 1 1 1 18.2 22 PZD SZA P4SMAJ12AS P4SMAJ12CAS 12 13.3 14.7 1 1 1 19.9 20.1 PZE SZB P4SMAJ13AS P4SMAJ13CAS 13 14.4 15.9 1 1 1 21.5 18.6 PZF SZC P4SMAJ14AS P4SMAJ14CAS 14 15.6 17.2 1 1 1 23.2 17.2 PZG SZD P4SMAJ15AS P4SMAJ15CAS 15 16.7 18.5 1 1 1 24.4 16.4 PZH SZE P4SMAJ16AS P4SMAJ16CAS 16 17.8 19.7 1 1 1 26 15.3 PZJ SZF P4SMAJ17AS P4SMAJ17CAS 17 18.9 20.9 1 1 1 27.6 14.5 PZK SZG P4SMAJ18AS P4SMAJ18CAS 18 20 22.1 1 1 1 29.2 13.7 PZL SZH P4SMAJ20AS P4SMAJ20CAS 20 22.2 24.5 1 1 1 32.4 12.3 PZM SZJ P4SMAJ22AS P4SMAJ22CAS 22 24.4 26.9 1 1 1 35.5 11.2 PZN SZK P4SMAJ24AS P4SMAJ24CAS 24 26.7 29.5 1 1 1 38.9 10.3 PZP SZL P4SMAJ26AS P4SMAJ26CAS 26 28.9 31.9 1 1 1 42.1 9.5 PZQ SZM P4SMAJ28AS P4SMAJ28CAS 28 31.1 34.4 1 1 1 45.4 8.8 PZR SZN P4SMAJ30AS P4SMAJ30CAS 30 33.3 36.8 1 1 1 48.4 8.3 PZS SZP P4SMAJ33AS P4SMAJ33CAS 33 36.7 40.6 1 1 1 53.3 7.5 PZT SZQ P4SMAJ36AS P4SMAJ36CAS 36 40 44.2 1 1 1 58.1 6.9 PZU SZR P4SMAJ40AS P4SMAJ40CAS 40 44.4 49.1 1 1 1 64.5 6.2 PZV SZS P4SMAJ43AS P4SMAJ43CAS 43 47.8 52.8 1 1 1 69.4 5.7 PZW SZT P4SMAJ45AS P4SMAJ45CAS 45 50 55.3 1 1 1 72.7 5.5 PZX SZU P4SMAJ48AS P4SMAJ48CAS 48 53.3 58.9 1 1 1 77.4 5.2 PZY SZV P4SMAJ51AS P4SMAJ51CAS 51 56.7 62.7 1 1 1 82.4 4.9 PZZ SZW P4SMAJ54AS P4SMAJ54CAS 54 60 66.3 1 1 1 87.1 4.6 RZA SZX P4SMAJ58AS P4SMAJ58CAS 58 64.4 71.2 1 1 1 93.6 4.3 RZB SZY P4SMAJ60AS P4SMAJ60CAS 60 66.7 73.7 1 1 1 96.8 4.1 RZC SZZ P4SMAJ64AS P4SMAJ64CAS 64 71.1 78.6 1 1 1 103 3.9 RZD TZA P4SMAJ70AS P4SMAJ70CAS 70 77.8 86 1 1 1 113 3.5 RZE TZB October 7,2021 P4SMAJ8.5AS_SERIES-REV.01 Page 2 P4SMAJ8.5AS ~ P4SMAJ220CAS Series Electrical Characteristics (TA = 25 oC unless otherwise noted) IR VBR Part Number UNI VRWM BI VC@IPP @VRWM Marking Code Min. Max. IT uA V V V mA UNI BI V A UNI BI 400W Transient Voltage Suppressor P4SMAJ75AS P4SMAJ75CAS 75 83.3 92.1 1 1 1 121 3.3 RZF TZC P4SMAJ78AS P4SMAJ78CAS 78 86.7 95.8 1 1 1 126 3.2 RZG TZD P4SMAJ85AS P4SMAJ85CAS 85 94.4 104 1 1 1 137 2.9 RZH TZE P4SMAJ90AS P4SMAJ90CAS 90 100 111 1 1 1 146 2.7 RZJ TZF P4SMAJ100AS P4SMAJ100CAS 100 111 123 1 1 1 162 2.5 RZK TZG P4SMAJ110AS P4SMAJ110CAS 110 122 135 1 1 1 177 2.3 RZL TZH P4SMAJ120AS P4SMAJ120CAS 120 133 147 1 1 1 193 2 RZM TZJ P4SMAJ130AS P4SMAJ130CAS 130 144 159 1 1 1 209 1.9 RZN TZK P4SMAJ150AS P4SMAJ150CAS 150 167 185 1 1 1 243 1.6 RZP TZL P4SMAJ160AS P4SMAJ160CAS 160 178 197 1 1 1 259 1.5 RZQ TZM P4SMAJ170AS P4SMAJ170CAS 170 189 209 1 1 1 275 1.4 RZR TZN P4SMAJ180AS P4SMAJ180CAS 180 198 222 1 1 1 292 1.3 RZS TZP P4SMAJ190AS P4SMAJ190CAS 190 209 243.2 1 1 1 308 1.3 RZT TZQ P4SMAJ200AS P4SMAJ200CAS 200 220 247 1 1 1 324 1.2 RZU TZR P4SMAJ210AS P4SMAJ210CAS 210 231 268.8 1 1 1 340 1.2 RZV TZS P4SMAJ220AS P4SMAJ220CAS 220 242 272 1 1 1 356 1.1 RZW TZT Notes : 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25°C per Fig.2 2. Mounted on 100cm2 copper pads to each terminal 3. Mounted on a FR4 PCB, single-sided copper, standard footprint October 7,2021 P4SMAJ8.5AS_SERIES-REV.01 Page 3 P4SMAJ8.5AS ~ P4SMAJ220CAS Series PPPM - Peak Pulse Power(kW) 10 Non-Repetitive Pulse Waveform Shown in Figure 3 TA = 25°C 1 0.1 1 10 100 1,000 10,000 PPP or IPP Derating Percentage (%) TYPICAL CHARACTERISTIC CURVES 110 100 90 80 70 60 50 40 30 20 10 0 0 25 Fig.1 Pulse Power Rating Curve 75 100 125 150 175 200 Fig.2 Derating Curve 10,000 110 100 90 80 70 60 50 40 30 20 10 0 CJ - Junction Capacitance(pF) Percent of IPP (%) 50 TA - Ambient Temperature(℃) td - Pulse Width(us) 50% of IPP @1000us Rise time 10~90%-10us 0 1 2 3 Time (ms) Fig.3 10/1000us Pulse Waveform October 7,2021 4 Uni-direconal VR = 0 V 1,000 100 Bi-direconal VR = 0 V 10 1 1 10 100 1000 VRWM - Reverse Stand-off Voltage (V) Fig.4 Typical Capacitance P4SMAJ8.5AS_SERIES-REV.01 Page 4 P4SMAJ8.5AS ~ P4SMAJ220CAS Series Part No. Packing Code Version Part No. Packing Code Package Type Packing Type Marking Version P4SMAJxxxxAS_R1_00001 SMA 1.8K pcs / 7” reel See Table Halogen free RoHS compliant Packaging Information & Mounting Pad Layout SMA Dimension October 7,2021 Unit: inch(mm) SMA Pad Layout P4SMAJ8.5AS_SERIES-REV.01 Unit: inch(mm) Page 5 P4SMAJ8.5AS ~ P4SMAJ220CAS Series Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. October 7,2021 P4SMAJ8.5AS_SERIES-REV.01 Page 6