P4SMAJ48CA-AU_R1_000A1

PP4SMA6.8A-AU ~ P4SMA82CA-AU Series SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Voltage 6.8~82 V SMA 400 W Power Features  ISO10605(C=330 pF,R=330Ω): ± 30kV Air, ± 30kV Contact  HBM ≧ ± 8 kV & CDM ≧ ± 2 kV  AEC-Q101 qualified  Lead free in compliance with EU RoHS 2.0  Green molding compound as per IEC 61249 standard Mechanical Data  Case: Molded plastic, SMA  Terminals: Solder plated, solderable per MIL-STD-750, Method 2026  Approx. Weight: 0.0024 ounces, 0.068 grams o Maximum Ratings and Thermal Characteristics (TA=25 C unless otherwise noted) PARAMETER SYMBOL Peak Pulse Power Dissipation(tp=10/1000us) PPP Peak Forward Surge Currert(8.3ms single half sine-wave) Peak Pulse Current on tp=10/1000us waveform (Fig.2) ISO10605(C=330pF, R=330Ω) (Air) Typical Thermal Resistance Junction to Ambient Storage Temperature Range October 26,2020 IFSM IPPM (1) VESD ISO10605(C=330pF, R=330Ω) (Contact) Operating Junction Temperature Range (1) (2) RθJA (3) TJ TSTG P4SMA6.8A-AU_SERIES-REV.12 LIMIT UNITS 400 W 40 A See table 1 A ±30 kV ±30 70 o C/W -55~150 o -55~150 o C C Page 1 PP4SMA6.8A-AU ~ P4SMA82CA-AU Series o Electrical Characteristics (TA=25 C unless otherwise noted) Part Number UNI VRWM BI IR VBR VC@IPP @VRWM Marking Code Min. Max. IT uA V V V mA UNI BI V A UNI BI 400W Transient Voltage Suppressor P4SMA6.8A-AU P4SMA6.8CA-AU 5.8 6.45 7.14 10 1000 2000 10.5 40 MZB NZB P4SMA7.5A-AU P4SMA7.5CA-AU 6.4 7.13 7.88 10 500 1000 11.3 37 MZD NZD P4SMA8.2A-AU P4SMA8.2CA-AU 7.02 7.79 8.61 10 200 400 12.1 35 MZF NZF P4SMA9.1A-AU P4SMA9.1CA-AU 7.78 8.65 9.5 1 50 100 13.4 31 MZH NZH P4SMA10A-AU P4SMA10CA-AU 8.55 9.5 10.5 1 10 20 14.5 29 MZK NZK P4SMA11A-AU P4SMA11CA-AU 9.4 10.5 11.6 1 5 10 15.6 27 MZM NZM P4SMA12A-AU P4SMA12CA-AU 10.2 11.4 12.6 1 1 1 16.7 25 MZP NZP P4SMA13A-AU P4SMA13CA-AU 11.1 12.4 13.7 1 1 1 18.2 23 MZR NZR P4SMA15A-AU P4SMA15CA-AU 12.8 14.3 15.8 1 1 1 21.2 20 MZT NZT P4SMA16A-AU P4SMA16CA-AU 13.6 15.2 16.8 1 1 1 22.5 19 MZV NZV P4SMA18A-AU P4SMA18CA-AU 15.3 17.1 18.9 1 1 1 25.2 17 MZX NZX P4SMA20A-AU P4SMA20CA-AU 17.1 19 21 1 1 1 27.7 15 MZZ NZZ P4SMA22A-AU P4SMA22CA-AU 18.8 20.9 23.1 1 1 1 30.6 14 MXB NXB P4SMA24A-AU P4SMA24CA-AU 20.5 22.8 25.2 1 1 1 33.2 13 MXD NXD P4SMA27A-AU P4SMA27CA-AU 23.1 25.7 28.4 1 1 1 37.5 11.2 MXF NXF P4SMA30A-AU P4SMA30CA-AU 25.6 28.5 31.5 1 1 1 41.4 10 MXH NXH P4SMA33A-AU P4SMA33CA-AU 28.2 31.4 34.7 1 1 1 45.7 9 MXK NXK P4SMA36A-AU P4SMA36CA-AU 30.8 34.2 37.8 1 1 1 49.9 8.4 MXM NXM P4SMA39A-AU P4SMA39CA-AU 33.3 37.1 41 1 1 1 53.9 7.8 MXP NXP P4SMA43A-AU P4SMA43CA-AU 36.8 40.9 45.2 1 1 1 59.3 7.1 MXR NXR P4SMA47A-AU P4SMA47CA-AU 40.2 44.7 49.4 1 1 1 64.8 5 MXT NXT P4SMA51A-AU P4SMA51CA-AU 43.6 48.5 53.6 1 1 1 70.1 6 MXV NXV P4SMA56A-AU P4SMA56CA-AU 47.8 53.2 58.8 1 1 1 77 5.5 MXX NXX P4SMA62A-AU P4SMA62CA-AU 53 58.9 65.1 1 1 1 85 5 MXZ NXZ P4SMA68A-AU P4SMA68CA-AU 58.1 64.6 71.4 1 1 1 92 4.6 MYB NYB P4SMA75A-AU P4SMA75CA-AU 64.1 71.3 78.8 1 1 1 103 4.1 MYD NYD P4SMA82A-AU P4SMA82CA-AU 70.1 77.9 86.1 1 1 1 113 3.7 MYF NYF Note: 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25°C per Fig.2 2. Mounted on 5mm x 5mm copper pads to each terminal 3. Mounted on a FR4 PCB, single-sided copper, mini pad October 26,2020 P4SMA6.8A-AU_SERIES-REV.12 Page 2 10 Non-Repetitive Pulse Waveform Shown in Figure 3 TA = 25°C 1 0.1 1 10 100 1,000 td - Pulse Width(us) 10,000 110 100 90 80 70 60 50 40 30 20 10 0 PPP or IPP Derating Percentage (%) PPPM - Peak Pulse Power(kW) PP4SMA6.8A-AU ~ P4SMA82CA-AU Series 0 25 Fig.1 Pulse Power Rating Curve 75 100 125 150 175 200 Fig.2 Derating Curve CJ - Junction Capacitance(pF) 10,000 Percent of IPP (%) 110 100 90 80 70 60 50 40 30 20 10 0 50 TA - Ambient Temperature(°C) 50% of IPP@1000us Rise time 10~90 %-10 us 0 1 2 Time (ms) 3 4 Fig.3 10/1000us Pulse Waveform October 26,2020 Uni-directional VR = 0 V 1,000 100 Bi-directional VR = 0 V 10 1 1 10 100 VRWM - Reverse Stand-off Voltage (V) 1000 Fig.4 Typical Capacitance P4SMA6.8A-AU_SERIES-REV.12 Page 3 PP4SMA6.8A-AU ~ P4SMA82CA-AU Series Part No. Packing Code Version Part No. Packing Code Package Type Packing Type Marking Version P4SMAxxxx-AU_R1_000A1 SMA 1.8K pcs / 7” reel See Table Halogen free Packaging Information & Mounting Pad Layout SMA Dimension October 26,2020 Unit: inch(mm) SMA Pad Layout P4SMA6.8A-AU_SERIES-REV.12 Unit: inch(mm) Page 4 PP4SMA6.8A-AU ~ P4SMA82CA-AU Series Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. October 26,2020 P4SMA6.8A-AU_SERIES-REV.12 Page 5