P4SMAJ54A-AU_R1_000A1

P4SMAJ5.0A-AU ~ P4SMAJ70CA-AU Series SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Voltage 5~70 V Power SMA 400 W Features  ISO10605(C=330 pF,R=330Ω): ± 30kV Air, ± 30kV Contact  HBM ≧ ± 8 kV & CDM ≧ ± 2 kV  AEC-Q101 qualified  Lead free in compliance with EU RoHS 2.0  Green molding compound as per IEC 61249 standard Mechanical Data  Case: Molded plastic, SMA  Terminals: Solder plated, solderable per MIL-STD-750, Method 2026  Approx. Weight: 0.0024 ounces, 0.068 grams Maximum Ratings and Thermal Characteristics (TA=25oC unless otherwise noted) PARAMETER SYMBOL Peak Pulse Power Dissipation(tp=10/1000us) PPP (1) (2) LIMIT UNITS 400 W Power Dissipation on Infinite Heat Sink at TL=50oC PD 3.3 W Peak Forward Surge Currert(8.3ms single half sine-wave) IFSM 40 A IPPM (1) See table 1 A Peak Pulse Current on tp=10/1000us waveform(Fig.2) ISO10605(C=330pF, R=330Ω) (Air) VESD ISO10605(C=330pF, R=330Ω) (Contact) Typical Thermal Resistance Junction to Ambient Operating Junction Temperature Range Storage Temperature Range January 7,2020 ±30 ±30 kV RθJA (3) 70 oC/W TJ -55~150 oC TSTG -55~150 oC P4SMAJ-AU_SERIES-REV.18 Page 1 P4SMAJ5.0A-AU ~ P4SMAJ70CA-AU Series Electrical Characteristics (TA=25oC unless otherwise noted) IR Part Number UNI VRWM BI Marking VBR @VRWM VC@IPP Code Min. Max. IT uA V V V mA UNI BI V A UNI BI 400W Transient Voltage Suppressor P4SMAJ5.0A-AU P4SMAJ5.0CA-AU 5 6.4 7 10 800 1600 9.2 43.5 HE TE P4SMAJ6.0A-AU P4SMAJ6.0CA-AU 6 6.67 7.37 10 800 1600 10.3 38.8 HG TG P4SMAJ6.5A-AU P4SMAJ6.5CA-AU 6.5 7.22 7.98 10 500 1000 11.2 35.7 HK TK P4SMAJ7.0A-AU P4SMAJ7.0CA-AU 7 7.78 8.6 10 200 400 12 33.3 HM TM P4SMAJ7.5A-AU P4SMAJ7.5CA-AU 7.5 8.33 9.21 1 100 200 12.9 31 HP TP P4SMAJ8.0A-AU P4SMAJ8.0CA-AU 8 8.89 9.83 1 50 100 13.6 29.4 HR TR P4SMAJ8.5A-AU P4SMAJ8.5CA-AU 8.5 9.44 10.4 1 10 20 14.4 27.7 HT TT P4SMAJ9.0A-AU P4SMAJ9.0CA-AU 9 10 11.1 1 5 5 15.4 26 HV TV P4SMAJ10A-AU P4SMAJ10CA-AU 10 11.1 12.3 1 5 5 17 23.5 HX TX P4SMAJ11A-AU P4SMAJ11CA-AU 11 12.2 13.5 1 1 1 18.2 22 HZ TZ P4SMAJ12A-AU P4SMAJ12CA-AU 12 13.3 14.7 1 1 1 19.9 20.1 IE UE P4SMAJ13A-AU P4SMAJ13CA-AU 13 14.4 15.9 1 1 1 21.5 18.6 IG UG P4SMAJ14A-AU P4SMAJ14CA-AU 14 15.6 17.2 1 1 1 23.2 17.2 IK UK P4SMAJ15A-AU P4SMAJ15CA-AU 15 16.7 18.5 1 1 1 24.4 16.4 IM UM P4SMAJ16A-AU P4SMAJ16CA-AU 16 17.8 19.7 1 1 1 26 15.3 IP UP P4SMAJ17A-AU P4SMAJ17CA-AU 17 18.9 20.9 1 1 1 27.6 14.5 IR UR P4SMAJ18A-AU P4SMAJ18CA-AU 18 20 22.1 1 1 1 29.2 13.7 IT UT P4SMAJ20A-AU P4SMAJ20CA-AU 20 22.2 24.5 1 1 1 32.4 12.3 IV UV P4SMAJ22A-AU P4SMAJ22CA-AU 22 24.4 26.9 1 1 1 35.5 11.2 IX UX P4SMAJ24A-AU P4SMAJ24CA-AU 24 26.7 29.5 1 1 1 38.9 10.3 IZ UZ P4SMAJ26A-AU P4SMAJ26CA-AU 26 28.9 31.9 1 1 1 42.1 9.5 JE VE P4SMAJ28A-AU P4SMAJ28CA-AU 28 31.1 34.4 1 1 1 45.4 8.8 JG VG P4SMAJ30A-AU P4SMAJ30CA-AU 30 33.3 36.8 1 1 1 48.4 8.3 JK VK P4SMAJ33A-AU P4SMAJ33CA-AU 33 36.7 40.6 1 1 1 53.3 7.5 JM VM P4SMAJ36A-AU P4SMAJ36CA-AU 36 40 44.2 1 1 1 58.1 6.9 JP VP P4SMAJ40A-AU P4SMAJ40CA-AU 40 44.4 49.1 1 1 1 64.5 6.2 JR VR P4SMAJ43A-AU P4SMAJ43CA-AU 43 47.8 52.8 1 1 1 69.4 5.7 JT VT P4SMAJ45A-AU P4SMAJ45CA-AU 45 50 55.3 1 1 1 72.7 5.5 JV VV P4SMAJ48A-AU P4SMAJ48CA-AU 48 53.3 58.9 1 1 1 77.4 5.2 JX VX P4SMAJ51A-AU P4SMAJ51CA-AU 51 56.7 62.7 1 1 1 82.4 4.9 JZ VZ January 7,2020 P4SMAJ-AU_SERIES-REV.18 Page 2 P4SMAJ5.0A-AU ~ P4SMAJ70CA-AU Series Electrical Characteristics (TA=25oC unless otherwise noted) IR Part Number UNI VRWM BI Marking VBR @VRWM VC@IPP Code Min. Max. IT uA V V V mA UNI BI V A UNI BI 400W Transient Voltage Suppressor P4SMAJ54A-AU P4SMAJ54CA-AU 54 60 66.3 1 1 1 87.1 4.6 RE WE P4SMAJ58A-AU P4SMAJ58CA-AU 58 64.4 71.2 1 1 1 93.6 4.3 RG WG P4SMAJ60A-AU P4SMAJ60CA-AU 60 66.7 73.7 1 1 1 96.8 4.1 RK WK P4SMAJ64A-AU P4SMAJ64CA-AU 64 71.1 78.6 1 1 1 103 3.9 RM WM P4SMAJ70A-AU P4SMAJ70CA-AU 70 77.8 86 1 1 1 113 3.5 RP WP Note: 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25°C per Fig.2 2. Mounted on 5mm2 copper pads to each terminal 3. Mounted on a FR4 PCB, single-sided copper, mini pad January 7,2020 P4SMAJ-AU_SERIES-REV.18 Page 3 P4SMAJ5.0A-AU ~ P4SMAJ70CA-AU Series TYPICAL CHARACTERISTIC CURVES 10 Non-Repetive Pluse Waverform Shown in Figure 3 TA = 25 °C PP PPM PP 1 0.1 1 10 100 1,000 110 100 90 80 70 60 50 40 30 20 10 0 10,000 0 25 td - Pulse Width(us) Fig.1 Pulse Power Rating Curve 110 100 90 80 70 60 50 40 30 20 10 0 50 75 100 125 150 175 200 TA - Ambient Temperature(°C) Fig.2 Derating Curve 10,000 Uni-direc onal VR = 0 V 1,000 PP 50% of IPP@1000us 100 Bi-direc onal VR = 0 V 10 J Rise time 10~90 %-10 us 1 0 1 2 3 4 Time (ms) 10 100 1000 VRWM - Reverse Stand-off Voltage (V) Fig.3 10/1000us Pulse Waveform January 7,2020 1 Fig.4 Typical Capacitance P4SMAJ-AU_SERIES-REV.18 Page 4 P4SMAJ5.0A-AU ~ P4SMAJ70CA-AU Series Part No Packing Code Version Part No Packing Code Package Type Packing Type Marking Version P4SMAJxxxx-AU_R2_000A1 SMA 7.5K pcs / 13” reel See Table Halogen free Packaging Information & Mounting Pad Layout SMA Dimension January 7,2020 Unit: inch(mm) SMA Pad Layout P4SMAJ-AU_SERIES-REV.18 Unit: inch(mm) Page 5 P4SMAJ5.0A-AU ~ P4SMAJ70CA-AU Series Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. January 7,2020 P4SMAJ-AU_SERIES-REV.18 Page 6