P6KE100AS_AY_00001

P6KE10AS ~ P6KE250CAS Series Transient Voltage Suppressor Recongnized File # E210467 Voltage 10~250 V DO-15 600 W Power Features  Fast response time  Low incremental surge resistance  High temperature soldering : 260oC/10 seconds at terminals  Lead free in compliance with EU RoHS 2.0  Green molding compound as per IEC 61249 standard Mechanical Data  Case: DO-15 Package  Terminals: Solderable per MIL-STD-750, Method 2026  Approx. Weight: 0.014 ounces, 0.4 grams Maximum Ratings and Thermal Characteristics (TA = 25 oC unless otherwise noted) PARAMETER SYMBOL Peak Pulse Power Dissipation(tp = 10 / 1000 us) Peak Pulse Current on tp = 10 / 1000 us waveform(Fig.2) Power Dissipation on Infinite Heat Sink at TL = 75 oC ESD IEC61000-4-2(Air) Typical Thermal Resistance Junction to Ambient Storage Temperature Range October 7,2021 UNITS 600 W IPPM (1) See table 1 A PD 5 W PPP (1) (2) VESD ESD IEC61000-4-2(Contact) Operating Junction Temperature Range LIMIT ±30 ±30 kV RθJA (3) 65 oC/W TJ -55~150 oC TSTG -55~150 oC P6KE10AS_SERIES-REV.03 Page 1 P6KE10AS ~ P6KE250CAS Series Electrical Characteristics (TA = 25 oC unless otherwise noted) IR VBR Part Number UNI VRWM BI VC@IPP @VRWM Marking Code Min. Max. IT uA V V V mA UNI BI V A UNI BI 600W Transient Voltage Suppressor P6KE10AS P6KE10CAS 8.55 9.5 10.5 1 10 20 14.5 41 P6KE10AS P6KE10CAS P6KE11AS P6KE11CAS 9.4 10.5 11.6 1 5 10 15.6 38 P6KE11AS P6KE11CAS P6KE12AS P6KE12CAS 10.2 11.4 12.6 1 5 5 16.7 36 P6KE12AS P6KE12CAS P6KE13AS P6KE13CAS 11.1 12.4 13.7 1 1 1 18.2 33 P6KE13AS P6KE13CAS P6KE15AS P6KE15CAS 12.8 14.3 15.8 1 1 1 21.2 28 P6KE15AS P6KE15CAS P6KE16AS P6KE16CAS 13.6 15.2 16.8 1 1 1 22.5 27 P6KE16AS P6KE16CAS P6KE18AS P6KE18CAS 15.3 17.1 18.9 1 1 1 25.2 24 P6KE18AS P6KE18CAS P6KE20AS P6KE20CAS 17.1 19 21 1 1 1 27.7 22 P6KE20AS P6KE20CAS P6KE22AS P6KE22CAS 18.8 20.9 23.1 1 1 1 30.6 20 P6KE22AS P6KE22CAS P6KE24AS P6KE24CAS 20.5 22.8 25.2 1 1 1 33.2 18 P6KE24AS P6KE24CAS P6KE27AS P6KE27CAS 23.1 25.7 28.4 1 1 1 37.5 16 P6KE27AS P6KE27CAS P6KE30AS P6KE30CAS 25.6 28.5 31.5 1 1 1 41.4 14.4 P6KE30AS P6KE30CAS P6KE33AS P6KE33CAS 28.2 31.4 34.7 1 1 1 45.7 13.2 P6KE33AS P6KE33CAS P6KE36AS P6KE36CAS 30.8 34.2 37.8 1 1 1 49.9 12 P6KE36AS P6KE36CAS P6KE39AS P6KE39CAS 33.3 37.1 41 1 1 1 53.9 11.2 P6KE39AS P6KE39CAS P6KE43AS P6KE43CAS 36.8 40.9 45.2 1 1 1 59.3 10.1 P6KE43AS P6KE43CAS P6KE47AS P6KE47CAS 40.2 44.7 49.4 1 1 1 64.8 9.3 P6KE47AS P6KE47CAS P6KE51AS P6KE51CAS 43.6 48.5 53.6 1 1 1 70.1 8.6 P6KE51AS P6KE51CAS P6KE56AS P6KE56CAS 47.8 53.2 58.8 1 1 1 77 7.8 P6KE56AS P6KE56CAS P6KE62AS P6KE62CAS 53 58.9 65.1 1 1 1 85 7.1 P6KE62AS P6KE62CAS P6KE68AS P6KE68CAS 58.1 64.6 71.4 1 1 1 92 6.5 P6KE68AS P6KE68CAS P6KE75AS P6KE75CAS 64.1 71.3 78.8 1 1 1 103 5.8 P6KE75AS P6KE75CAS P6KE82AS P6KE82CAS 70.1 77.9 86.1 1 1 1 113 5.3 P6KE82AS P6KE82CAS P6KE91AS P6KE91CAS 77.8 86.5 95.5 1 1 1 125 4.8 P6KE91AS P6KE91CAS P6KE100AS P6KE100CAS 85.5 95 105 1 1 1 137 4.4 P6KE100AS P6KE100CAS P6KE110AS P6KE110CAS 94 105 116 1 1 1 152 4 P6KE110AS P6KE110CAS P6KE120AS P6KE120CAS 102 114 126 1 1 1 165 3.6 P6KE120AS P6KE120CAS P6KE130AS P6KE130CAS 111 124 137 1 1 1 179 3.3 P6KE130AS P6KE130CAS P6KE150AS P6KE150CAS 128 143 158 1 1 1 207 2.9 P6KE150AS P6KE150CAS P6KE160AS P6KE160CAS 136 152 168 1 1 1 219 2.7 P6KE160AS P6KE160CAS October 7,2021 P6KE10AS_SERIES-REV.03 Page 2 P6KE10AS ~ P6KE250CAS Series Electrical Characteristics (TA = 25 oC unless otherwise noted) IR VBR Part Number UNI @VRWM VRWM BI VC@IPP Marking Code Min. Max. IT uA V V V mA UNI BI V A UNI BI 600W Transient Voltage Suppressor P6KE170AS P6KE170CAS 145 162 179 1 1 1 234 2.6 P6KE170AS P6KE170CAS P6KE180AS P6KE180CAS 154 171 189 1 1 1 246 2.4 P6KE180AS P6KE180CAS P6KE200AS P6KE200CAS 171 190 210 1 1 1 274 2.2 P6KE200AS P6KE200CAS P6KE220AS P6KE220CAS 185 209 231 1 1 1 328 1.9 P6KE220AS P6KE220CAS P6KE250AS P6KE250CAS 214 237 263 1 1 1 344 1.8 P6KE250AS P6KE250CAS Notes : 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25°C per Fig.2 2. Mounted on 100cm2 copper pads to each terminal 3. Mounted on a FR4 PCB, single-sided copper, standard footprint October 7,2021 P6KE10AS_SERIES-REV.03 Page 3 P6KE10AS ~ P6KE250CAS Series 10 Non-Repetitive Pulse Waveform Shown in Figure 3 TA=25℃ 1 0.1 1 10 100 1,000 10,000 PPP or IPP Derating Percentage (%) PPPM - Peak Pulse Power(kW) TYPICAL CHARACTERISTIC CURVES 110 100 90 80 70 60 50 40 30 20 10 0 0 25 50 Fig.1 Pulse Power Rating Curve 100 125 150 175 200 Fig.2 Derating Curve 10,000 110 100 90 80 70 60 50 40 30 20 10 0 CJ - Junction Capacitance(pF) Percent of IPP (%) 75 TA - Ambient Temperature(℃) td - Pulse Width(us) 50% of IPP@1000us Rise time 10~90%-10us 0 1 2 3 Time (ms) Fig.3 10/1000us Pulse Waveform October 7,2021 4 Uni-direconal VR = 0 V 1,000 100 Bi-direconal VR = 0 V 10 1 1 10 100 1000 VRWM - Reverse Stand-off Voltage (V) Fig.4 Typical Capacitance P6KE10AS_SERIES-REV.03 Page 4 P6KE10AS ~ P6KE250CAS Series Part No. Packing Code Version Part No. Packing Code Package Type Packing Type Marking Version P6KExxxxAS_AY_00001 DO-15 3K pcs / Ammo See Table Halogen free RoHS compliant Packaging Information DO-15 Dimension Unit: inch(mm) 1.0(25.4)MIN. 0.300(7.6) 0.230(5.8) 1.0(25.4)MIN. 0.034(0.86) 0.028(0.71) October 7,2021 0.140(3.6) 0.104(2.6) P6KE10AS_SERIES-REV.03 Page 5 P6KE10AS ~ P6KE250CAS Series Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. October 7,2021 P6KE10AS_SERIES-REV.03 Page 6