P6SMB200A_R1_00001

P6SMB SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt 6.8 to 400 Volt BREAK DOWN VOLTAGE FEATURES • For surface mounted applications in order to optimize board space. • Glass passivated junction • Low inductance • Plastic package has Underwriters Laboratory Fammability Classification 94V-O • High temperature soldering : 260°C /10 seconds at terminals • ESD IEC-61000-4-2 Air + 30kV, Contact + 30kV • Lead free in compliance with EU RoHS 2011/65/EU directive • Green molding compound as per IEC61249 Std. . (Halogen Free) MECHANICAL DATA • • • • • Case:JEDEC DO-214AA ,Molded plastic over passivated junction Terminals: Solder plated,solderable per MIL-STD-750,Method 2026 Polarity: Color band denotes cathode end Standard Packaging:12mm tape (EIA-481) Weight: 0.003 ounce, 0.093 gram DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA Suffix for types Electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz. For Capacitive load derate current by 20%. Rating Symbol Value Units Peak Pulse Power Dissipation on tp=10/1000μs waveform (Notes 1,2, Fig.1) PPP 600 Watts Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (Notes 2,3) I FSM 100 Amps Peak Pulse Current on tp=10/1000μs waveform (Notes 1) Fig.3 I PPM see Table 1 Amps Typical Thermal Resistance Junction to Air (Notes 2) RθJA 60 ESD IEC-61000-4-2 (Air) ESD IEC-61000-4-2 (Contact) VESD +30 +30 TJ,TSTG -55 to +150 Operating Junction and Storage Temperature Range O C/W kV O C NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above T A = 25 o C per Fig. 2. 2. Mounted on 5mm 2 (0.13mm thick) land areas. 3. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. 4. A transient suppressor is selected according to the working peak reverse voltage (V RW M ), which should be equal to or greater than the DC or continuous peak operating voltage level. January 6,2016-REV.11 PAGE . 1 P6SMB SERIES Reverse Stand-off Voltage Breakdown Voltage Test Current Reverse Leakage Part Number V RWM (No t e s 4 ) UNI BI V V B R @ IT M i n. M a x. V V IT IR @ VRWM Max. Peak Clamp Pulse Voltage Current 10/1000μs 10/1000μs Marking Code VC @ IPP IPP μA V A UNI BI DZA UNI BI mA μA 600W Transient Voltage Suppressor P6SMB6.8 P6SMB6.8C 5.5 6.12 7.48 10 1000 2000 10.8 56 EZA P6SMB6.8A P6SMB6.8CA 5.8 6.45 7.14 10 1000 2000 10.5 57 EZB DZB P6SMB7.5 P6SMB7.5C 6.05 6.75 8.25 10 500 1000 11.7 51 EZC DZC P6SMB7.5A P6SMB7.5CA 6.4 7.13 7.88 10 500 1000 11.3 53 EZD DZD P6SMB8.2 P6SMB8.2C 6.63 7.38 9.02 10 200 400 12.5 48 EZE DZE P6SMB8.2A P6SMB8.2CA 7.02 7.79 8.61 10 200 400 12.1 50 EZF DZF P6SMB9.1 P6SMB9.1C 7.37 8.19 10 1 50 100 13.8 44 EZG DZG P6SMB9.1A P6SMB9.1CA 7.78 8.65 9.5 1 50 100 13.4 45 EZH DZH P6SMB10 P6SMB10C 8.1 9 11 1 10 20 15 40 EZJ DZJ P6SMB10A P6SMB10CA 8.55 9.5 10.5 1 10 20 14.5 41 EZK DZK P6SMB11 P6SMB11C 8.92 9.9 12.1 1 5 10 16.2 37 EZL DZL P6SMB11A P6SMB11CA 9.4 10.5 11.6 1 5 10 15.6 38 EZM DZM P6SMB12 P6SMB12C 9.72 10.8 13.2 1 5 5 17.3 35 EZN DZN P6SMB12A P6SMB12CA 10.2 11.4 12.6 1 5 5 16.7 36 EZP DZP P6SMB13 P6SMB13C 10.5 11.7 14.3 1 1 1 19 32 EZQ DZQ P6SMB13A P6SMB13CA 11.1 12.4 13.7 1 1 1 18.2 33 EZR DZR P6SMB15 P6SMB15C 12.1 13.5 16.5 1 1 1 22 27 EZS DZS P6SMB15A P6SMB15CA 12.8 14.3 15.8 1 1 1 21.2 28 EZT DZT P6SMB16 P6SMB16C 12.9 14.4 17.6 1 1 1 23.5 26 EZU DZU P6SMB16A P6SMB16CA 13.6 15.2 16.8 1 1 1 22.5 27 EZV DZV P6SMB18 P6SMB18C 14.5 16.2 19.8 1 1 1 26.5 23 EZW DZW P6SMB18A P6SMB18CA 15.3 17.1 18.9 1 1 1 25.2 24 EZX DZX P6SMB20 P6SMB20C 16.2 18 22 1 1 1 29.1 21 EZY DZY P6SMB20A P6SMB20CA 17.1 19 21 1 1 1 27.7 22 EZZ DZZ P6SMB22 P6SMB22C 17.8 19.8 24.2 1 1 1 31.9 19 EXA DXA P6SMB22A P6SMB22CA 18.8 20.9 23.1 1 1 1 30.6 20 EXB DXB P6SMB24 P6SMB24C 19.4 21.6 26.4 1 1 1 34.7 17 EXC DXC P6SMB24A P6SMB24CA 20.5 22.8 25.2 1 1 1 33.2 18 EXD DXD P6SMB27 P6SMB27C 21.8 24.3 29.7 1 1 1 39.1 15 EXE DXE P6SMB27A P6SMB27CA 23.1 25.7 28.4 1 1 1 37.5 16 EXF DXF P6SMB30 P6SMB30C 24.3 27 33 1 1 1 43.5 14 EXG DXG P6SMB30A P6SMB30CA 25.6 28.5 31.5 1 1 1 41.4 14.4 EXH DXH P6SMB33 P6SMB33C 26.8 29.7 36.3 1 1 1 47.7 12.6 EXJ DXJ P6SMB33A P6SMB33CA 28.2 31.4 34.7 1 1 1 45.7 13.2 EXK DXK P6SMB36 P6SMB36C 29.1 32.4 39.6 1 1 1 52 11.6 EXL DXL P6SMB36A P6SMB36CA 30.8 34.2 37.8 1 1 1 49.9 12 EXM DXM P6SMB39 P6SMB39C 31.6 35.1 42.9 1 1 1 56.4 10.6 EXN DXN P6SMB39A P6SMB39CA 33.3 37.1 41 1 1 1 53.9 11.2 EXP DXP P6SMB43 P6SMB43C 34.8 38.7 47.3 1 1 1 61.9 9.6 EXQ DXQ P6SMB43A P6SMB43CA 36.8 40.9 45.2 1 1 1 59.3 10.1 EXR DXR P6SMB47 P6SMB47C 38.1 42.3 51.7 1 1 1 67.8 8.9 EXS DXS P6SMB47A P6SMB47CA 40.2 44.7 49.4 1 1 1 64.8 9.3 EXT DXT P6SMB51 P6SMB51C 41.3 45.9 56.1 1 1 1 73.5 8.2 EXU DXU P6SMB51A P6SMB51CA 43.6 48.5 53.6 1 1 1 70.1 8.6 EXV DXV P6SMB56 P6SMB56C 45.6 50.4 61.6 1 1 1 80.5 7.4 EXW DXW January 6,2016-REV.11 PAGE . 2 P6SMB SERIES Reverse Stand-off Voltage Breakdown Voltage Test Reverse Leakage Current Part Number V RWM (No te s 4 ) UNI BI V V B R @ IT Mi n. Ma x. V V IT IR @ VRWM Max. Peak Clamp Pulse Voltage Current 10/1000μs 10/1000μs Marking Code VC @ IPP IPP μA V A UNI BI UNI BI mA μA 600W Transient Voltage Suppressor P6SMB56A P6SMB56CA 47.8 53.2 58.8 1 1 1 77 7.8 EXX DXX P6SMB62 P6SMB62C 50.2 55.8 68.2 1 1 1 89 6.8 EXY DXY P6SMB62A P6SMB62CA 53 58.9 65.1 1 1 1 85 7.1 EXZ DXZ P6SMB68 P6SMB68C 55.1 61.2 74.8 1 1 1 98 6.1 EYA DYA P6SMB68A P6SMB68CA 58.1 64.6 71.4 1 1 1 92 6.5 EYB DYB P6SMB75 P6SMB75C 60.7 67.5 82.5 1 1 1 108 5.5 EYC DYC P6SMB75A P6SMB75CA 64.1 71.3 78.8 1 1 1 103 5.8 EYD DYD P6SMB82 P6SMB82C 66.4 73.8 90.2 1 1 1 118 5.1 EYE DYE P6SMB82A P6SMB82CA 70.1 77.9 86.1 1 1 1 113 5.3 EYF DYF P6SMB91 P6SMB91C 73.7 81.9 100 1 1 1 131 4.5 EYG DYG P6SMB91A P6SMB91CA 77.8 86.5 95.5 1 1 1 125 4.8 EYH DYH P6SMB100 P6SMB100C 81 90 110 1 1 1 144 4.2 EYJ DYJ P6SMB100A P6SMB100CA 85.5 95 105 1 1 1 137 4.4 EYK DYK P6SMB110 P6SMB110C 89.2 99 121 1 1 1 158 3.8 EYL DYL P6SMB110A P6SMB110CA 94 105 116 1 1 1 152 4 EYM DYM P6SMB120 P6SMB120C 97.2 108 132 1 1 1 173 3.5 EYN DYN P6SMB120A P6SMB120CA 102 114 126 1 1 1 165 3.6 EYP DYP P6SMB130 P6SMB130C 105 117 143 1 1 1 187 3.2 EYQ DYQ P6SMB130A P6SMB130CA 111 124 137 1 1 1 179 3.3 EYR DYR P6SMB150 P6SMB150C 121 135 165 1 1 1 215 2.8 EYS DYS P6SMB150A P6SMB150CA 128 143 158 1 1 1 207 2.9 EYT DYT P6SMB160 P6SMB160C 130 144 176 1 1 1 230 2.6 EYU DYU P6SMB160A P6SMB160CA 136 152 168 1 1 1 219 2.7 EYV DYV P6SMB170 P6SMB170C 138 153 187 1 1 1 244 2.5 EYW DYW P6SMB170A P6SMB170CA 145 162 179 1 1 1 234 2.6 EYX DYX P6SMB180 P6SMB180C 146 162 198 1 1 1 258 2.3 EYY DYY P6SMB180A P6SMB180CA 154 171 189 1 1 1 246 2.4 EYZ DYZ P6SMB200 P6SMB200C 162 180 220 1 1 1 287 2.1 EWA DWA P6SMB200A P6SMB200CA 171 190 210 1 1 1 274 2.2 EWB DWB P6SMB220 P6SMB220C 175 198 242 1 1 1 344 1.8 EWC DWC P6SMB220A P6SMB220CA 185 209 231 1 1 1 328 1.9 EWD DWD P6SMB250 P6SMB250C 202 225 275 1 1 1 360 1.7 EWE DWE P6SMB250A P6SMB250CA 214 237 263 1 1 1 344 1.8 EWF DWF P6SMB300A - 256 285 315 1 1 - 414 1.5 EWH - P6SMB350A - 300 332 368 1 1 - 482 1.3 EWK - P6SMB400A - 342 380 420 1 1 - 548 1.1 EWM - January 6,2016-REV.11 PAGE . 3 P6SMB SERIES January 6,2016-REV.11 PAGE . 4 P6SMB SERIES MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 3K per 13" plastic Reel T/R - 0.5K per 7" plastic Reel January 6,2016-REV.11 PAGE . 5 P6SMB SERIES Part No_packing code_Version P6SMB6.8_R1_00001 P6SMB6.8_R2_00001 For example : RB500V-40_R2_00001 Serial number Part No. Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING January 6,2016-REV.11 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 6 P6SMB SERIES Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. January 6,2016-REV.11 PAGE . 7