P6SMBJ14CA-AU_R1_000A1

P6SMBJ-AU SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt 5 to 70 Volt STAND-OFF VOLTAGE Recongnized File # E210467 FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • ESD IEC-61000-4-2 Air + 30kV, Contact + 30kV • For surface mounted applications in order to optimize board space • Low inductance • High temperature soldering : 260°C /10 seconds at terminals • AEC-Q101 qualified • Lead free in compliance with EU RoHS 2.0 • Green molding compound as per IEC 61249 standard MECHANICAL DATA • Case: JEDEC DO-214AA,Molded plastic over passivated junction. • Terminals: Solder plated,solderable per MIL-STD-750,Method 2026 • Polarity: Color band denotes cathode end • Standard Packaging: 12mm tape (EIA-481) • Weight: 0.003 ounces, 0.092 grams DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA Suffix for types P6SMBJ5.0 thru types P6SMBJ70. Electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz. For Capacitive load derate current by 20%. Rating Symbol Value Units 600 Watts Peak Pulse Power Dissipation on tp=10/1000μs waveform (Notes 1,2, Fig.1) P Power Dissipation on Infinite Heat Sink at TL=50 OC PD 5 Watts Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (Notes 2,3) IFSM 100 Amps Peak Pulse Current on tp=10/1000μs waveform (Notes 1) Fig.3 I see Table 1 Amps Typical Thermal Resistance Junction to Air (Notes 2) R 60 ESD IEC-61000-4-2 (Air) ESD IEC-61000-4-2 (Contact) VESD +30 +30 TJ,TSTG -55 to +150 Operating Junction and Storage Temperature Range PP PPM θJA O C/ W kV O C NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25OC per Fig. 2. 2. Mounted on 5mm2 (0.13mm thick) land areas. 3. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. 4. A transient suppressor is selected according to the working peak reverse voltage (VRWM ), which should be equal to or greater than the DC or continuous peak operating voltage level. January 7,2020 P6SMBJ-AU_SERIES-REV.16 PAGE . 1 P6SMBJ-AU SERIES Reverse Stand-off Voltage Part Number VRWM (Notes 4) UNI BI V Breakdown Voltage V BR @ I T Test Current Max. Clamp Reverse Leakage IR @ VRWM IT Mi n. M a x. UN I BI V V mA μA μA Voltage Peak Pulse Current 10/1000μs 10/1000μs V C @ IPP IPP V A Marking Code UNI BI 600W Transient Voltage Suppressor P6SMBJ5.0A-AU P6SMBJ5.0CA-AU 5 6.4 7.07 10 800 1600 9.2 65.2 KE AE P6SMBJ6.0A-AU P6SMBJ6.0CA-AU 6 6.67 7.37 10 800 1600 10.3 58.3 KG AG P6SMBJ6.5A-AU P6SMBJ6.5CA-AU 6.5 7.22 7.98 10 500 1000 11.2 53.6 KK AK P6SMBJ7.0A-AU P6SMBJ7.0CA-AU 7 7.78 8.6 10 200 400 12.0 50 KM AM P6SMBJ7.5A-AU P6SMBJ7.5CA-AU 7.5 8.33 9.21 1 100 200 12.9 46.5 KP AP P6SMBJ8.0A-AU P6SMBJ8.0CA-AU 8 8.89 9.83 1 50 100 13.6 44.1 KR AR P6SMBJ8.5A-AU P6SMBJ8.5CA-AU 8.5 9.44 10.4 1 10 20 14.4 41.7 KT AT P6SMBJ9.0A-AU P6SMBJ9.0CA-AU 9 10 11.1 1 5 5 15.4 39 KV AV P6SMBJ10A-AU P6SMBJ10CA-AU 10 11.1 12.3 1 5 5 17 35.3 KX AX P6SMBJ11A-AU P6SMBJ11CA-AU 11 12.2 13.5 1 1 1 18.2 33 KZ AZ P6SMBJ12A-AU P6SMBJ12CA-AU 12 13.3 14.7 1 1 1 19.9 30.2 LE BE P6SMBJ13A-AU P6SMBJ13CA-AU 13 14.4 15.9 1 1 1 21.5 27.9 LG BG P6SMBJ14A-AU P6SMBJ14CA-AU 14 15.6 17.2 1 1 1 23.2 25.8 LK BK P6SMBJ15A-AU P6SMBJ15CA-AU 15 16.7 18.5 1 1 1 24.4 24 LM BM P6SMBJ16A-AU P6SMBJ16CA-AU 16 17.8 19.7 1 1 1 26 23.1 LP BP P6SMBJ17A-AU P6SMBJ17CA-AU 17 18.9 20.9 1 1 1 27.6 21.7 LR BR P6SMBJ18A-AU P6SMBJ18CA-AU 18 20 22.1 1 1 1 29.2 20.5 LT BT P6SMBJ20A-AU P6SMBJ20CA-AU 20 22.2 24.5 1 1 1 32.4 18.5 LV BV P6SMBJ22A-AU P6SMBJ22CA-AU 22 24.4 27 1 1 1 35.5 16.9 LX BX P6SMBJ24A-AU P6SMBJ24CA-AU 24 26.7 29.5 1 1 1 38.9 15.4 LZ BZ P6SMBJ26A-AU P6SMBJ26CA-AU 26 28.9 31.9 1 1 1 42.1 14.2 ME CE P6SMBJ28A-AU P6SMBJ28CA-AU 28 31.1 34.4 1 1 1 45.4 13.2 MG CG P6SMBJ30A-AU P6SMBJ30CA-AU 30 33.3 36.8 1 1 1 48.4 12.4 MK CK P6SMBJ33A-AU P6SMBJ33CA-AU 33 36.7 40.6 1 1 1 53.3 11.3 MM CM P6SMBJ36A-AU P6SMBJ36CA-AU 36 40 44.2 1 1 1 58.1 10.3 MP CP P6SMBJ40A-AU P6SMBJ40CA-AU 40 44.4 49.1 1 1 1 64.5 9.3 MR CR P6SMBJ43A-AU P6SMBJ43CA-AU 43 47.8 52.8 1 1 1 69.4 8.6 MT CT P6SMBJ45A-AU P6SMBJ45CA-AU 45 50 55.3 1 1 1 72.7 8.3 MV CV P6SMBJ48A-AU P6SMBJ48CA-AU 48 53.3 58.9 1 1 1 77.4 7.7 MX CX P6SMBJ51A-AU P6SMBJ51CA-AU 51 56.7 62.7 1 1 1 82.4 7.3 MZ CZ P6SMBJ54A-AU P6SMBJ54CA-AU 54 60 66.3 1 1 1 87.1 6.9 NE DE P6SMBJ58A-AU P6SMBJ58CA-AU 58 64.4 71.2 1 1 1 93.6 6.4 NG DG P6SMBJ60A-AU P6SMBJ60CA-AU 60 66.7 73.7 1 1 1 96.8 6.2 NK DK P6SMBJ64A-AU P6SMBJ64CA-AU 64 71.1 78.6 1 1 1 103 5.8 NM DM P6SMBJ70A-AU P6SMBJ70CA-AU 70 77.8 86 1 1 1 113 5.3 NP DP January 7,2020 P6SMBJ-AU_SERIES-REV.16 PAGE . 2 P6SMBJ-AU SERIES Non-Repetive Pluse Waverform Shown in Figure 3 TA=25℃ 1.0 0.1 1 10 100 1,000 td - Pulse Width(μs) 110 100 90 80 70 60 50 40 30 20 10 0 PPP or IPP Derating Percentage (%) PPPM - Peak Pulse Power(kW) 10.0 10,000 0 Fig.1 Peak Pulse Power Rating CJ - Junction Capacitance(pF) 50% of IPP@1000us Rise time 10~90%-10us 0 1 2 Time (ms) 3 4 Fig.3 10/1000μs Pulse Waveform January 7,2020 50 75 100 125 150 175 200 TA - Ambient Temperature(℃) Fig.2 Derating Curve 10,000 Percent of IPP (%) 110 100 90 80 70 60 50 40 30 20 10 0 25 Uni-direc onal VR=0V 1,000 100 Bi-direc onal VR=0V 10 1 1 10 100 VRWM - Reverse Stand-off Voltage (V) Fig.4 Typical Capacitance P6SMBJ-AU_SERIES-REV.16 PAGE . 3 P6SMBJ-AU SERIES MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 3K per 13" plastic Reel T/R - 0.8K per 7" plastic Reel January 7,2020 P6SMBJ-AU_SERIES-REV.16 PAGE . 4 P6SMBJ-AU SERIES Part No._packing code_Version P6SMBJ5.0-AU_R1_000A1 P6SMBJ5.0-AU_R2_000A1 For example : RB500V-40_R2_00001 Serial number Version code means HF Part No. Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING January 7,2020 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) P6SMBJ-AU_SERIES-REV.16 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 5 P6SMBJ-AU SERIES Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. January 7,2020 P6SMBJ-AU_SERIES-REV.16 PAGE . 6