PG4007_R2_00001

PG4001 SERIES GLASS PASSIVATED JUNCTION RECTIFIER VOLTAGE 50 to 1000 Volt 1 Ampere CURRENT FEATURES • Plastic package has Underwriters Laboratory • Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound. 0.034(0.86) 0.028(0.71) • Lead free in compliance with EU RoHS 2.0 0.20 5(5.2) 0.16 0(4.1) MECHANCALDATA • Case: Molded plastic, JEDEC DO-41 • Terminals: Axial leads, solderable per MIL-STD-750,Method 2026 • Polarity: Color Band denotes cathode 0.107(2.7) 0.080(2.0) 1 .0(25.4)MIN . • Weight: 0.012 ounces, 0.336 grams 1 2 Cathode Anode MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. PARAMETER SYMBOL PG4001 PG4002 PG4003 PG4004 PG4005 PG4006 PG4007 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Current 0.375"(9.5mm) Lead Length IF(AV) 1 A Peak Forward Surge Current : 8.3ms single half sine-wave superimposed on rated load I FSM 30 A Maximum Forward Voltage at 1A VF 1.1 V IR 1 50 μA Typical Junction Capacitance (Note 1) CJ 15 pF Typical Thermal Resistance RθJA 50 TJ,TSTG -55 to +150 Maximum DC Reverse Current at Rated DC Blocking Voltage Operating and Storage Temperature Range TJ=25OC TJ=100OC O C/W O C NOTES : 1. Measured at 1 MHz and applied reverse voltage of 4 VDC. * JEDEC Registered Value July 11,2017­REV.06 PAGE . 1 PG4001 SERIES INSTANTANEOUS FORWARD CURRENT, AMPERES AVERAGEFORWARDRECITIFIED CURRENTAMPERES RATING AND CHARACTERISTIC CURVES 2.5 2.0 1.5 1.0 0.5 0 0 20 40 60 80 100 120 140 160 100 40 20 10 4.0 2.0 1.0 0.4 0.2 0.1 0.4 0.6 0.8 1.0 1.2 1.4 1.8 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS AMBIENT TEMPERAURE, O C Fig.1-FORWARD CURRENTDERATING CURVE Fig.2-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PEAK FORWARD SURGE CURRENT, AMPERES INSTANTANEOUS REVERSECURRENT, uA 40 100 o TJ = 125 C 10 TJ = 100 OC 1.0 O TJ = 25 C 0.1 35 30 25 20 15 10 5 0 1 2 5 10 20 50 100 NO. OF CYCLE AT 60HZ 0.01 20 40 60 80 100 120 140 Fig.4-MAXIMUMNON - REPETITIVESURGE CURRENT PERCENTAGE OF PEAK REVERSE VOLTAGE,% 100 Fig.3-TYPICALREVERSECHARACTERISTIC CAPACITANCE, pF 60 40 TJ = 25OC 20 10 6 4 2 1 0.1 0.4 1.0 4 10 40 100 REVERSEVOLTAGE, VOLTS Fig.5-TYPICALJUNCTIONCAPACITANCE July 11,2017­REV.06 PAGE . 2 PG4001 SERIES Part No_packing code_Version PG4001_AY_00001 PG4001_AY_10001 PG4001_B0_00001 PG4001_B0_10001 PG4001_R2_00001 PG4001_R2_10001 For example : RB500V-40_R2_00001 Serial number Version code means HF Part No. Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING July 11,2017­REV.06 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 3 PG4001 SERIES Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. July 11,2017­REV.06 PAGE . 4