PJEC5V0M1TA_R1_00001

PPJEC5V0M1TA Low Capacitance TVS/ESD Protection VRWM 5V 0.006(0.15)MIN. Features 0.120(3.04)  Bidirectional ESD protection of one line 0.110(2.80)  IEC61000-4-2(ESD): ±15kV Air, ±8kV Contact Compliance with the capability up to ±30kV  IEC61000-4-4(EFT): 40A(5/50nS) 0.056(1.40) 0.047(1.20)  IEC61000-4-5(Lightning): 3.5A(8/20S) 0.008(0.20) 0.079(2.00)  Low leakage current, maximum of 0.1A at rated voltage 0.003(0.08) 0.070(1.80)  Lead free in compliance with EU RoHS 2011/65/EU directive.  Green molding compound as per IEC61249 Std. (Halogen Free) 0.004(0.10) 0.044(1.10) 0.000(0.00) 0.035(0.90) 0.020(0.50) Mechanical Data 0.013(0.35)  Case: SOT-23, Plastic  Terminals: Solderable per MIL-STD-750, Method 2026  Approx. Weight: 0.0003 ounces, 0.008 grams  Marking: M1A Applications  Mobile Phones and accessories  Desktops, Servers and Notebook  Hand held portable  Digital Cameras  Computer Interfaces Protection  Serial and Parallel Ports Protection Fig.170(Top View)  Control Signal Lines Protection o Maximum Ratings (TA=25 C unless otherwise noted) PARAMETER ESD IEC61000-4-2(Air) ESD IEC61000-4-2(Contact) Operating Junction Temperature Storage Temperature Range October 15,2015-REV.00 SYMBOL VESD LIMIT ±30 ±30 UNITS kV TJ -55 to +125 o TSTG -55 to +150 o C C Page 1 PPJEC5V0M1TA o Electrical Characteristics (TA=25 C unless otherwise noted) PARAMETER Reverse Stand-Off Voltage Snap-Break Voltage Reverse Leakage Current SYMBOL MIN. TYP. MAX. UNITS - - - 5 V VSB ISB=50mA 5 - 8 V IR VR=5.0V - - 0.1 A IPP=1A, tP=8/20s - - 9 IPP=3.5A, tP=8/20s - - 12.5 IPP=4A, tP=100ns - 8.6 - IPP=8A, tP=100ns - 9.7 - tP=100ns - 0.27 -  0Vdc Bias f=1MHz - - 10 pF VRWM Clamping Voltage VCL Clamping Voltage TLP (Note 1) VCL Dynamic Resistance Off State Junction Capacitance RDYN CJ TEST CONDITION V V NOTES : 1. Testing using Transmission Line Pulse (TLP) conditions: Z0 = 50Ω , tP = 100 ns. October 15,2015-REV.00 Page 2 PPJEC5V0M1TA TYPICAL CHARACTERISTIC CURVES Fig.1 Typical Junction Capacitance Fig.3 Typical Peak Clamping Voltage(8/20s) October 15,2015-REV.00 Fig.2 Transmission Line Pulsing (TLP) Measurement Fig.4 8/20s Pulse Waveform Page 3 PPJEC5V0M1TA 0.035 MIN. (0.90) MIN. MOUNTING PAD LAYOUT 0.078 (2.00) 0.037 (0.95) 0.043 (1.10) 0.031 MIN. (0.80) MIN. 0.043 (1.10) 0.106 (2.70) ORDER INFORMATION Packing information T/R – 3K per 7" plastic Reel T/R – 12K per 13" plastic Reel October 15,2015-REV.00 Page 4 PPJEC5V0M1TA Part No_packing code_Version PJEC5V0M1TA_R1_00001 PJEC5V0M1TA_R2_00001 For example : RB500V-40_R2_00001 ˙Serial number ˙ ˙Version code means HF Part No. ˙Packing size code means 13" ˙Packing type means T/R Packing Code XX Version Code XXXXX Packing type 1st Code Packing size code 2nd Code HF or RoHS 1st Code 2nd~5th Code Tape and Ammunition Box (T/B) A N/A 0 HF 0 serial number Tape and Reel (T/R) R 7" 1 RoHS 1 serial number Bulk Packing (B/P) B 13" 2 Tube Packing (T/P) T 26mm X Tape and Reel (Right Oriented) (TRR) S 52mm Y Tape and Reel (Left Oriented) (TRL) L PANASERT T/B CATHODE UP (PBCU) U FORMING F PANASERT T/B CATHODE DOWN (PBCD) D October 15,2015-REV.00 Page 5 PPJEC5V0M1TA Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. October 15,2015-REV.00 Page 6