PJLC1V5

PJLC1V5 LOW CAPACITANCE ESD / TRANSIENT DATA LINE PROTECTOR FOR 1.5V SYSTEMS VOLTAGE FEATURES • Off-State Capacitance typical of 6pF, max 10pF @ 1MHz 0Vdc .007(.20)MIN 1.5 Volts POWER 50 Watts SOT- 23 Unit: inch (mm) • Maximum Leakage Current of 1 µ A @ 1.5V .056(1.40) .047(1.20) .119(3.00) .110(2.80) • Breakdown Voltage of 2.2V @ 1mA • IEC61000-4-2 Compliance (8kV Air, 15kV Contact Discharge) • Industry Standard Surface Mount Package SOT23 • Pb free product are available : 99% Sn above can meet RoHS environment substance directive request .103(2.60) APPLICATIONS • High Speed Data Lines • Microcontroller and Microprocessor I/O interfaces .083(2.10) .066(1.70) .006(.15) .002(.05) .044(1.10) • Mobile Phone and PDA's • LAN/WAN Equipment • Instrumentation Equipment .006(.15)MAX .020(.50) .013(.35) MECHANICAL DATA • Case: Molded Plastic SOT-23 • Marking : T1L 3(GND) 1(N.C.) .035(0.90) 2(LINE) MAXIMUM RATINGS PATING Peak Pulse Power ( 8/20µs Waveform ) ESD Voltage (per IEC61000-4-2) Lead Soldering Temperature ( max 10 seconds ) Operating Temperature Range Storage Temperature Range Maximum Peak Pluse Current SYMBOL PPK VESD TL TJ TSTG IPP VALUE 50 25 260 -50 to 150 -50 to 150 1 UNITS W kV O O O C C C A STAD-FEB.03.2005 .086(2.20) PAGE . 1 ELECTRICAL CHARACTERISTICS P ARAMETER Reverse Stand-Off Voltage Reverse Breakdown Voltage SYMBOL V RWM V BR @100 µA @1m A V RWM=1.5V @TA =25OC IPP =1A @8/20 µs IPP =3A @8/20 µs Pin 1 to Pin 3 1MHz, 0Vdc 6 1.75 2.1 1.8 2.2 1 CONDITIONS MIN. TYPICAL MAX. 1.5 UNITS V V Reverse Leakage Current IR µA Clamping Voltage VC 4 V Clamping Voltage Off-State Capacitance VC CJ 7 10 V pF RATING AND CHARACTERISTICS CURVES 100 100 Current, mA 10 Leakage Current, µ A 10 1 0.1 0.01 0.001 0.8 TA = 25 C O 1 0.1 0.01 1 1.5 2 2.5 3 1 1.2 1.4 1.6 1.8 2 Voltage, Volts Voltage vs Current Characterisitc Voltage, Volts Leakage Current 110 100 90 Percent of Ipp 80 70 60 50 40 30 20 10 0 0 Ri se ti me 10-90% - 8- µ s 50% of I pp @ 2 µ s 0 5 10 15 20 25 30 t ime, µ s Pulse Waveform STAD-FEB.03.2005 PAGE . 2 Typical Application Configuration (Shown for two data lines) Connector / Port IC I/O Lines PJLC1V5 PJLC1V5 GND MOUNTING PAD LAYOUT SOT-23 Unit: inch (mm) 0.035 MIN (0.9 MIN) 0.078 MAX 0.031 MIN (0.8 MIN) 0.037 MAX (0.95 MAX) STAD-OCT.10.2003 (2.0 MAX) PAGE . 3 ORDER INFORMATION • Packing information T/R - 12K per 13" plastic Reel T/R - 3.0K per 7" plastic Reel LEGAL STATEMENT IMPORTANT NOTICE This information is intended to unambiguously characterize the product in order to facilitate the customer's evaluation of the device in the application. The information will help the customer's technical experts determine that the device is compatible and interchangeable with similar devices made by other vendors. The information in this data sheet is believed to be reliable and accurate. The specifications and information herein are subject to change without notice. New products and improvements in products and product characterization are constantly in process. Therefore, the factory should be consulted for the most recent information and for any special characteristics not described or specified. Copyright Pan Jit International Inc. 2003 All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract. The information presented is believed to be accurate and reliable, and may change without notice in advance. No liability will be accepted by the publisher for any consequence of use.Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. STAD-OCT.10.2003 PAGE . 4