PJSRV05W-4GDW_R1_00001

PPJSRV05W-4GDW Low Capacitance TVS/ESD Protection VRWM 5V Features  IEC61000-4-2(ESD): ±30kV Air, ±30kV Contact Compliance  IEC61000-4-4(EFT): 40A(5/50nS)  IEC61000-4-5(Lightning): 10A(8/20S)  Low leakage current, maximum 1A at rated voltage  Lead free in compliance with EU RoHS 2011/65/EU directive.  Green molding compound as per IEC61249 Std. (Halogen Free) Mechanical Data  Case: SOT-363, Plastic  Terminals: Solderable per MIL-STD-750, Method 2026  Approx. Weight: 0.0002 ounces, 0.006 grams  Marking: KG Applications  USB2.0 Data Line Protection  Video Graphics Cards  Monitors and Flat Panel Displays Notebook computers  Digital Video Interface(DVI)  10/100/1000 Ethernet  ATM Interfaces Fig.70(Top View)  Control Signal Lines Protection o Maximum Ratings (TA=25 C unless otherwise noted) PARAMETER ESD IEC61000-4-2(Air) ESD IEC61000-4-2(Contact) Operating Junction Temperature Storage Temperature Range May 27,2016-REV.01 SYMBOL VESD LIMIT ±30 ±30 UNITS kV TJ -55 to +125 o TSTG -55 to +150 o C C Page 1 PPJSRV05W-4GDW o Electrical Characteristics (TA=25 C unless otherwise noted) PARAMETER Reverse Stand-Off Voltage SYMBOL (Note 1) Reverse Breakdown Voltage Reverse leakage current VRWM VBR IR TEST CONDITION IBR=1mA, PIN 5 to GND VR=5V, PIN 5 to GND IPP=1A, tP=8/20s, Clamping Voltage VCL any I/O pin to GND IPP=10A, tP=8/20s, any I/O pin to GND IPP=4A, tP=100ns, Clamping Voltage TLP (Note 2) VCL any I/O pin to GND IPP=8A, tP=100ns, any I/O pin to GND Dynamic Resistance(Note 2) RDYN tP=100ns MIN. TYP. MAX. UNITS - - 5 V 6 - 8.5 V - - 1 A - - 8 V - - 12 - 12 V - 17 - - 0.8 - - 1.6 2  0Vdc Bias f=1MHz, Between any I/O pins Off State Junction Capacitance CJ to GND 0Vdc Bias f=1MHz, Between any I/O pins pF - 0.8 1 NOTES : 1. A transient suppressor is selected according to the working peak reverse voltage(V RWM), Which should be equal to or greater than the DC or continuous peak operation voltage level. 2. Testing using Transmission Line Pulse (TLP) conditions: Z0 = 50Ω , tP = 100 ns. May 27,2016-REV.01 Page 2 PPJSRV05W-4GDW TYPICAL CHARACTERISTIC CURVES Fig.1 Typical Junction Capacitance Fig.3 Typical Peak Clamping Voltage(8/20s) May 27,2016-REV.01 Fig2 Transmission Line Pulsing (TLP) Measurement Fig.4 8/20s Pulse Waveform Page 3 PPJSRV05W-4GDW PART NO PACKING CODE VERSION Part No Packing Code Package Type Packing type Marking Version PJSRV05W-4GDW_R1_00001 SOT-363 3K pcs / 7” reel KG Halogen free PJSRV05W-4GDW_R2_00001 SOT-363 10K pcs / 13” reel KG Halogen free MOUNTING PAD LAYOUT May 27,2016-REV.01 Page 4 PPJSRV05W-4GDW Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. May 27,2016-REV.01 Page 5