PS156

DATA SHEET PS150~PS1510 PLASTIC SILICON RECTIFIER VOLTAGE 50 to 1000 Volts CURRENT - 1.5 Amperes FEATURES • Low cost • High current capability • Plastic package has Underwriters Laboratories Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound. • 1.5 Ampere operation at TA =50°C with no thermal runaway. • Exceeds environmental standards of MIL-S-19500/228 • Low leakage 1.0(25.4) MIN. DO-15 .034(.86) .028(.71) Unit: inch ( mm ) .300(7.6) .230(5.8) .140(3.6) .104(2.6) Case: Molded plastic, DO-15 Terminals: Axial leads, solderable to MIL-STD-202,Method 208 Polarity: Color Band denotes cathode end Mounting Position: Any Weight: 0.015 ounce, 0.4 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Resistive or inductive load, 60Hz. PS150 Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Current .375"(9.5mm) lead length at TA=60°C Peak Forward Surge Current, IFM (surge):8.3ms single half sine-wave superimposed on rated load(JEDEC method) Maximum Forward Voltage at 1.5A DC Maximum DC Reverse Current at Rated DC Blocking Voltage TA=25°C Maximum DC Reverse Current at Rated DC Blocking Voltage TA=100°C Typical Junction capacitance (Note 1) Typical Junction Resistance(Note 2) R θJA Operating and Storage Temperature Range TJ ,TSTG 50 35 50 PS151 100 70 100 PS152 200 140 200 PS154 400 280 400 1.5 PS156 600 420 600 PS158 800 560 800 PS1510 1000 700 1000 1.0(25.4) MIN. MECHANICAL DATA UNIT V V V A 50.0 1.10 5.0 500 25.0 45.0 -55 to +150 A V µA µA pF °C/ W °C NOTES: 1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC 2. Thermal resistance from junction to ambient and from junction to lead length 0.375"(9.5mm) P.C.B. mounted DATE : SEP.14.2002 PAGE . 1 RATING AND CHARACTERISTIC CURVES FORWARD SURGE CURRENT, AMPERES pk (HALF-SINE WAVE) 10 50 INSTANTANEOUS FORWARD CURRENT AMPERES 40 1.0 30 20 0.1 10 0 .01 .2 0 .4 .6 .8 1.0 1.2 1.4 1.6 1.8 1 2 4 6 8 10 20 40 60 80100 INSTAN I TANEOUS FORWARD VOLTAGE, VOLTS NUMBER OF CYCLES AT 60HZ Fig. 1-TYPICAL FORWARD CHARACTERISTICS AVERAGE FORWARD RECTIFIED CURRENT AMPERES 2.00 1.75 1.50 1.25 1.00 0.75 .50 .25 0 0 20 Fig.2-MAXIMUM OVERLOAD SURGE-CURRENT MAXIMUM AVERAGE CURRENT RAING SINGLEPHASE, HALF-WAVE,60Hz RESISTIVE OR INDUCTIVELOAD .375"(9mm) LEAD LENGTH 40 60 80 100 120 140 160 180 O AMBIENT TEMPERATURE, C Fig.3-FORWARD DERATING CURVE 100 JUNCTION CAPACITANCE,pF O T J =25 C 10 1 1 10 100 REVERSE VOLTAGE, VOLTS Fig.4- TYPICAL JUNCTION CAPACITANCE DATE : SEP.14.2002 PAGE . 2