PZS5114BAS-AU_R1_000A1

PPZS513V9BAS-AU ~ PZS5143BAS-AU Series SILICON ZENER DIODE Voltage 3.9~43V Power 500 mW SOD-123 Features  Planar Die construction  500mW Power Dissipation  Ideally Suited for Automated Assembly Processes  Lead free in compliance with EU RoHS 2.0  Green molding compound as per IEC 61249 standard  AEC-Q101 qualified Mechanical Data  Terminals: Solderable per MIL-STD-750, Method 2026  Polarity: Color band denotes cathode end  Approx. Weight: 0.0004 ounces, 0.001 grams o Maximum Ratings and Thermal Characteristics (TA = 25 C unless otherwise noted) PARAMETER SYMBOL o Peak Pulse Power Dissipation at T A=25 C Typical Thermal Resistance Junction to Ambient Operating Junction Temperature Range Storage Temperature Range PD (1) RθJA (2) TJ TSTG LIMIT UNITS 500 250 mW o C /W -55 to +150 o -55 to +150 o C C NOTES: 2 1. Mounted on a 5mm copper pads to each terminal. 2. Mounted on a FR-4 PCB, single-sided copper, mini pad . October 13,2017-REV.00 Page 1 PPZS513V9BAS-AU ~ PZS5143BAS-AU Series o Electrical Characteristics (TA=25 C unless otherwise noted) Nominal Zener Voltage Max. Reverse Leakage Current VZ@IZT IR@VR Part Number Marking Code Nom. V Min.V Max.V mA uA V PZS513V9BAS-AU 3.9 3.71 4.10 0.05 5 2 ACH PZS514V3BAS-AU 4.3 4.09 4.52 0.05 4 2 BCH PZS514V7BAS-AU 4.7 4.47 4.94 0.05 10 3 CCH PZS515V1BAS-AU 5.1 4.85 5.36 0.05 10 3 DCH PZS515V3BAS-AU 5.3 5.03 5.57 0.05 10 4 ECH PZS515V6BAS-AU 5.6 5.32 5.88 0.05 7 4.2 FCH PZS516V2BAS-AU 6.2 5.89 6.51 0.05 10 5 HCH PZS516V8BAS-AU 6.8 6.46 7.14 0.05 10 5.1 ICH PZS517V5BAS-AU 7.5 7.13 7.88 0.05 10 5.7 JCH PZS518V2BAS-AU 8.2 7.79 8.61 0.05 1 6.2 KCH PZS518V7BAS-AU 8.7 8.27 9.14 0.05 1 6.6 LCH PZS519V1BAS-AU 9.1 8.65 9.56 0.05 1 6.9 MCH PZS5110BAS-AU 10 9.5 10.5 0.05 1 7.6 NCH PZS5111BAS-AU 11 10.5 11.6 0.05 0.05 8.4 PCH PZS5112BAS-AU 12 11.4 12.6 0.05 0.05 9.1 RCH PZS5113BAS-AU 13 12.4 13.7 0.05 0.05 9.8 SCH PZS5114BAS-AU 14 13.3 14.7 0.05 0.05 10.6 TCH PZS5115BAS-AU 15 14.3 15.8 0.05 0.05 11.4 UCH PZS5116BAS-AU 16 15.2 16.8 0.05 0.05 12.1 VCH PZS5117BAS-AU 17 16.2 17.9 0.05 0.05 12.9 WCH PZS5118BAS-AU 18 17.1 18.9 0.05 0.05 13.6 XCH PZS5119BAS-AU 19 18.1 20 0.05 0.05 14.4 YCH PZS5120BAS-AU 20 19 21 0.05 0.01 15.2 ZCH PZS5122BAS-AU 22 20.9 23.1 0.05 0.01 16.7 2CH PZS5124BAS-AU 24 22.8 25.2 0.05 0.01 18.2 3CH PZS5125BAS-AU 25 23.8 26.3 0.05 0.01 19 4CH PZS5127BAS-AU 27 25.7 28.4 0.05 0.01 20.4 6CH PZS5128BAS-AU 28 26.6 29.4 0.05 0.01 21.2 7CH PZS5130BAS-AU 30 28.5 31.5 0.05 0.01 22.8 9CH PZS5133BAS-AU 33 31.4 34.7 0.05 0.01 25 AEH PZS5136BAS-AU 36 34.2 37.8 0.05 0.01 27.3 BEH PZS5139BAS-AU 39 37.1 41 0.05 0.01 29.6 CEH PZS5143BAS-AU 43 40.9 45.2 0.05 0.01 32.6 DEH October 13,2017-REV.00 Page 2 PPZS513V9BAS-AU ~ PZS5143BAS-AU Series TYPICAL CHARACTERISTIC CURVES Fig.1 Power Derating Curve Fig.2 Typical Junction Capacitance Fig.3 Typical Zener Breakdown Fig.4 Typical Zener Breakdown Fig.5 Typical Zener Breakdown October 13,2017-REV.00 Page 3 PPZS513V9BAS-AU ~ PZS5143BAS-AU Series Part No Packing Code Version Part No Packing Code Package Type Packing Type Marking Version PZS51xxxBAS-AU_R1_000A1 SOD-123 3K / 7" Reel See Table Halogen Free Packaging Information & Mounting Pad Layout SOD-123 Dimension Unit: inch(mm) SOD-123 Pad Layout Unit: inch(mm) 0.154(3.90) 0.141(3.60) 0.110(2.80) 0.098(2.50) 0.028(0.70) 0.019(0.50) 0.008(0.20)MAX. 0.005(0.12)MAX. October 13,2017-REV.00 0.071(1.80) 0.055(1.40) 0.053(1.35) 0.037(0.95) 0.016(0.40)MIN. Page 4 PPZS513V9BAS-AU ~ PZS5143BAS-AU Series Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. October 13,2017-REV.00 Page 5