SB160_AY_10001

SB120~SB160 SCHOTTKY BARRIER RECTIFIERS VOLTAGE 20 to 60 Volt CURRENT 1.0 Ampere FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound. 0.034(0.86) 0.028(0.71) • For use in low voltage,high frequency inverters ,free wheeling , and polarity protection applications . 0.205 (5.2 ) 0.160 (4.1 ) • Lead free in compliance with EU RoHS 2.0 MECHANICALDATA • Case: DO-41 Molded plastic • Terminals: Axial leads, solderable per MIL-STD-750,Method 2026 • Polarity: Color band denotes cathode 0.107(2.7) 0.080(2.0) 1.0(2 5.4 )MIN. • Weight: 0.0118 ounces, 0.336 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. PARAMETER SYMBOL SB120 SB130 SB140 SB150 SB160 UNITS Maximum Recurrent Peak Reverse Voltage V RRM 20 30 40 50 60 V Maximum RMS Voltage VRMS 14 21 28 35 42 V Maximum DC Blocking Voltage VDC 20 30 40 50 60 V Maximum Average Forward Rectified Current 0.375"(9.5mm) lead length (See Figure1) IF(AV) 1.0 A Peak Forward Surge Current : 8.3ms single half sine-wave superimposed on rated load IFSM 30 A Maximum Forward Voltage at 1.0A VF 0.5 0.7 V IR 0.2 10 0.1 10 mA Maximum DC Reverse Current at Rated DC Blocking Voltage Typical Thermal Resistance Operating Junction and Storage Temperature Range June 14,2017­REV.04 TJ=25OC TJ=100OC RθJA TJ,TSTG O 50 -55 to +125 C/W -55 to +150 O C PAGE . 1 SB120~SB160 1.0 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT AMPERES RATING AND CHARACTERISTIC CURVES =20-30V =40-60V .75 .50 SINGLEPHASEHALFWAVE60Hz RESISTIVEORINDUCTIVELOAD P.C.B MOUNTED ON 0.2 X 0.2"( 5.0 X 5. 0mm) COPPERPADAREAS .25 0 0 25 50 75 100 125 150 175 o 30 25 20 15 10 5 0 1 10 LEAD TEMPERATURE, C NO. OF CYCLE AT 60Hz Fig.1 FORWARD CURRENT DERATING CURVE Fig.2 MAXIMUM NON-REPETITIVEPEAKFORWARD SURGE CURRENT 10 4 10 3 10 2 10 1 10 0 FORWARD CURRENT , AMPERES REVERSE CURRENT , m A 10 5 10 O T J =125 C O T J =75 C O T J =25 C 10 -1 10 -2 20-40V 40 60 80 100 50-60V 1.0 0.1 O T A = 25 C 0.01 20 0 0.2 0.4 0.6 0.8 1.0 FORWARD VOLTAGE , VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE ,% Fig.3 TYPICAL REVERSE CHARACTERISTIC Percent of Reverse Voltage (%) 100 Fig.4 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTIC 120 100 80 60 20~30V 40 40~60V 20 0 0 25 50 75 100 125 150 TJ, Junction Temperature (°C) Fig.5 Operating Temperature Derating Curve June 14,2017­REV.04 PAGE . 2 SB120~SB160 Part No_packing code_Version SB120_AY_00001 SB120_AY_10001 SB120_B0_00001 SB120_B0_10001 SB120_R2_00001 SB120_R2_10001 For example : RB500V-40_R2_00001 Serial number Version code means HF Part No. Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING June 14,2017­REV.04 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 3 SB120~SB160 Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. June 14,2017­REV.04 PAGE . 4