SB52AFC_R1_00001

SB52AFC ~ SB56AFC Series Surface Mount Schottky Barrier Rectifier Voltage 20~60 V 5A Current SMAF-C Features     Low power loss, high efficiency High surge current capability Lead free in compliance with EU RoHS 2.0 Green molding compound as per IEC 61249 standard Mechanical Data    Case : Molded plastic, SMAF-C Terminals : Solderable per MIL-STD-750, Method 2026 Approx. Weight : 0.034 grams Maximum Ratings and Thermal Characteristics (TA = 25oC unless otherwise noted) PARAMETER Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current SYMBOL SB52AFC SB53AFC SB54AFC SB56AFC UNIT VRRM 20 30 40 60 V VRMS 14 21 28 42 V VR 20 30 40 60 V IF(AV) 5 A IFSM 100 A Peak Forward Surge Current : 8.3 ms Single Half Sine-Wave Superimposed On Rated Load Instantaneous Forward Voltage at 5A VF 0.54 0.66 V Reverse Current(Note 3) TJ =25 oC IR Reverse Current(Note 3) TJ =100 oC IR 30 20 mA CJ 159 125 pF 100 uA Typical Junction Capacitance Measured at 1 MHz And Applied VR = 10V Typical Thermal Resistance (Note 1) RθJL 15 (Note 2) RθJA 150 TJ -55 to +150 oC TSTG -55 to +150 oC Operating Junction Temperature Range Storage Temperature Range oC/W NOTES : 1. Mounted on a FR4 PCB, single-sided copper, with 100cm 2 copper pad area 2. Mounted on a FR4 PCB, single-sided copper, standard footprint 3. Short duration pulse test used to minimize self-heating effect November 3,2022 SB52AFC_SERIES-REV.01 Page 1 SB52AFC ~ SB56AFC Series TYPICAL CHARACTERISTIC CURVES 5 4 3 2 1 0 0 25 50 75 100 125 150 1000 CJ, Junction Capacitance (pF) IF, Forward Current (A) 6 20~40V 100 60V 10 0.1 Fig.1 Forward Current Derating Curve Fig.2 Typical Junction Capacitance IR, Reverse Current (mA) IR, Reverse Current (mA) 100 100 100 10 TJ = 125°C TJ = 150°C 1 TJ = 75°C 0.1 20~40V 0.01 TJ = 25°C 0.001 10 15 20 25 30 35 40 10 TJ = 125°C TJ = 150°C 1 TJ = 75°C 0.1 60V 0.01 TJ = 25°C 0.001 10 45 VR , Peak Reverse Voltage (V) 20 30 40 50 60 70 80 90 100 Percent of Rated Peak Reverse Voltage (%) Fig.3 Typical Reverse Characteristics Fig.4 Typical Reverse Characteristics 10 IF, Forward Current (A) 10 TJ = 150°C TJ = 125°C 1 TJ = 75°C 0.1 TJ = 25°C 20~40V 0.01 TJ = 150°C TJ = 125°C 1 TJ = 75°C TJ = 25°C 60V 0.1 0 0.2 0.4 0.6 0 VF, Forward Voltage (V) 0.2 0.4 0.6 0.8 1 VF, Forward Voltage (V) Fig.5 Typical Forward Characteristics Percent of Reverse Voltage (%) 10 VR, Reverse Bias Voltage (V) TC, Case Temperature (°C) IF, Forward Current (A) 1 Fig.6 Typical Forward Characteristics 120 100 80 60 20~40V 40 60V 20 0 0 25 50 75 100 125 150 TJ, Junction Temperature (°C) Fig.7 Operating Temperature Derating Curve November 3,2022 SB52AFC_SERIES-REV.01 Page 2 SB52AFC ~ SB56AFC Series Part No. Packing Code Version Part No. Package Type Packing Type Marking SB52AFC SMAF-C 3K pcs / 7” reel SB52 SB53AFC SMAF-C 3K pcs / 7” reel SB53 SB54AFC SMAF-C 3K pcs / 7” reel SB54 SB56AFC SMAF-C 3K pcs / 7” reel SB56 Version Halogen free RoHS compliant Halogen free RoHS compliant Halogen free RoHS compliant Halogen free RoHS compliant Packaging Information & Mounting Pad Layout SMAF-C Dimension SMAF-C Pad Layout Unit: inch(mm) 0.232 (5.9) 0.063 (1.6) 0.154(3.90) 0.145(3.70) 0.085 (2.15) 0.044(1.10) 0.035(0.90) 0.010(0.25) 0.006(0.15) 0.073(1.85) 0.065(1.65) 0.103(2.60) 0.094(2.40) Unit: inch(mm) 0.169 (4.3) 0.193(4.90) 0.177(4.50) 0.038(0.95) 0.021(0.55) November 3,2022 0.038(0.95) 0.021(0.55) SB52AFC_SERIES-REV.01 Page 3 SB52AFC ~ SB56AFC Series Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, noninfringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. November 3,2022 SB52AFC_SERIES-REV.01 Page 4