SBA130AS-AU_R1_000A1

PSBA120AS-AU / SBA130AS-AU / SBA140AS-AU EXTREME LOW VF SCHOTTKY RECTIFIER Voltage 20-40 V 1A Current SOD-123 Features     Ultra low forward voltage, low power loss Fast switching speed Surface mount package Lead free in compliance with EU RoHS 2.0  Green molding compound as per IEC 61249 standard  AEC-Q101 qualified Applications    Low voltage rectification Reverse polarity protection Low power consumption applications Mechanical Data    Case: Molded plastic, SOD-123 Terminals: Solderable per MIL-STD-750, Method 2026 Approx. Weight: 0.00037 ounces, 0.0104 grams o Maximum Ratings (TA = 25 C unless otherwise noted) PARAMETER SYMBOL SBA120AS-AU SBA130AS-AU SBA140AS-AU UNIT Maximum repetitive peak reverse voltage VRRM 20 30 40 V Maximum rms voltage VRMS 14 21 28 V VR 20 30 40 V Maximum dc blocking voltage Maximum average forward rectified current Peak forward surge current: 8.3ms single half sinewave Superimposed on rated load Typical thermal resistance Operating junction temperature range Storage temperature range IF(AV) 1 A IFSM 10 A RθJC (2) RθJA (1) 100 o C/W 510 TJ -55 to +150 o TSTG -55 to +150 o C C Electrical Characteristics PARAMETER SYMBOL IF = 0.5A VF o TJ =25 C IF = 1A IF = 10mA IF = 0.5A o TJ =125 C VR = 10V VR = 20V VR = 30V Reverse current IR (3) SBA130AS-AU SBA140AS-AU TYP. MAX. TYP. MAX. TYP. MAX. 0.22 - 0.22 - 0.23 - 0.35 - 0.36 - 0.39 - - 0.45 - 0.47 - 0.51 0.09 - 0.1 - 0.1 - 0.27 - 0.3 - 0.33 - 7.5 - 5.9 - 3.6 - - 100 10 - 4.2 - - - - 100 6.1 - - - - - - 100 3.2 - 2.2 - 1.2 - - - 3.9 - 1.7 - - - - - 2.3 - UNIT IF = 10mA Forward voltage SBA120AS-AU TEST CONDITION o TJ=25 C VR = 40V VR = 20V VR = 30V o TJ =125 C VR = 40V V V A mA Note : 1. Mounted on a FR4 PCB, single-sided copper, mini pad. 2. Mounted on a FR4 PCB, single-sided copper, with 100cm² copper pad area. 3. Short duration pulse test used to minimize self-heating effect. February 8,2018-REV.00 Page 1 PSBA120AS-AU / SBA130AS-AU / SBA140AS-AU TYPICAL CHARACTERISTIC CURVES 1000 CJ, Junction Capacitance (pF) 1.2 IF, Forward Current (A) 1 0.8 0.6 0.4 0.2 20V 100 40V 10 0 0 25 50 75 100 125 30V 1 150 0 TC, Case Temperature (°C) 16 24 32 40 VR, Reverse Bias Voltage (V) Fig.1 Forward Current Derating Curve Fig. 2 Typical Junction Capacitance 10 100 IR, Reverse Current (mA) IR, Reverse Current (mA) 8 1 TJ = 100°C 0.1 TJ = 150°C TJ = 125°C 20V 0.01 TJ = 25°C 10 1 TJ = 100°C 0.1 TJ = 125°C TJ = 150°C 30V 0.01 TJ = 25°C 0.001 20 40 60 80 100 0.001 20 40 60 80 100 Percent of Rated Reverse Voltage (%) Percent of Rated Reverse Voltage (%) Fig.3 Typical Reverse Characteristics Fig.4 Typical Reverse Characteristics 10 10 IF, Forward Current (A) IR, Reverse Current (mA) 20V 1 TJ = 100°C 0.1 TJ = 150°C TJ = 125°C 40V 0.01 TJ = 150°C 1 TJ = 125°C 0.1 TJ = 100°C TJ = 25°C TJ = 25°C 0.01 0.001 20 40 60 80 Percent of Rated Reverse Voltage (%) Fig.5 Typical Reverse Characteristics February 8,2018-REV.00 100 0 0.15 0.3 0.45 0.6 VF, Forward Voltage (V) Fig.6 Typical Forward Characteristics Page 2 PSBA120AS-AU / SBA130AS-AU / SBA140AS-AU 10 10 40V IF, Forward Current (A) IF, Forward Current (A) 30V TJ = 150°C 1 TJ = 125°C 0.1 TJ = 100°C TJ = 150°C 1 TJ = 125°C 0.1 TJ = 100°C TJ = 25°C TJ = 25°C 0.01 0.01 0 0.15 0.3 0.45 0.6 VF, Forward Voltage (V) 0 0.15 0.3 0.45 0.6 VF, Forward Voltage (V) Fig.7 Typical Forward Characteristics Fig.8 Typical Forward Characteristics Percent of Reverse Voltage (%) 120 100 80 60 40 20 0 0 25 50 75 100 125 150 TJ, Junction Temperature (°C) Fig.9 Operating Temperature Derating Curve February 8,2018-REV.00 Page 3 PSBA120AS-AU / SBA130AS-AU / SBA140AS-AU Part No Packing Code Version Part No Packing Code Package Type Packing Type Marking Version SBA120AS-AU_R1_000A1 SOD-123 3K pcs / 7” reel A7 Halogen free SBA130AS-AU_R1_000A1 SOD-123 3K pcs / 7” reel B7 Halogen free SBA140AS-AU_R1_000A1 SOD-123 3K pcs / 7” reel C7 Halogen free Packaging Information & Mounting Pad Layout SOD-123 Dimension Unit: inch(mm) SOD-123 Pad Layout Unit: inch(mm) 0.154(3.90) 0.141(3.60) 0.110(2.80) 0.098(2.50) 0.028(0.70) 0.019(0.50) 0.008(0.20)MAX. 0.005(0.12)MAX. February 8,2018-REV.00 0.071(1.80) 0.055(1.40) 0.053(1.35) 0.037(0.95) 0.016(0.40)MIN. Page 4 PSBA120AS-AU / SBA130AS-AU / SBA140AS-AU Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, noninfringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments relating to human life and for any applications concerning lifesaving or life-sustaining, such as medical instruments, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. February 8,2018-REV.00 Page 5