SD1020YT

DATA SHEET SD1020YT~SD10150YT SCHOTTKY BARRIER RECTIFIERS VOLTAGE FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For surface mounted applications • Low profile package • Built-in strain relief • Low power loss, High efficiency • High surge capacity .225(5.7) .209(5.3) .264(6.7) .248(6.3) .098(2.5) .082(2.1) .024(0.6) .016(0.4) 20 to 150 Volts CURRENT 10.0 Amperes TO-251AB Unit : inch (mm) • For use in low voltage high frequency inverters, free wheeling, and polarity protection applications • Pb free free product are avaiable : 99% Sn above can meet Rohs environment substance directive request .307(7.8) .283(7.2) .063(1.6) .047(1.2) .216(5.5) .200(5.1) MECHANICALDATA Case: TO-251AB molded plastic Terminals: Solder plated, solderable per MIL-STD-202G,Method 208 Polarity: As marking Weight: 0.015 ounces, 0.4grams. .032(0.8) .012(0.3) .09 .09 (2.3) (2.3) .071(1.8) .051(1.3) .02(0.5) MAXIMUM RATINGS AND DELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% PARAMETER Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375"(9.5mm) lead length at Tc =100OC Peak Forward Surge Current : 8.3ms single half sine-wave superimposed on rated load(JEDEC method) Maximum Instantaneous Forward Voltage at 10.0A Maximum DC Reverse Current TA=25OC at Rated DC Blocking Voltage TA=100OC Maximum Thermal Resistance Operating Junction Temperature Range Storage Temperature Range SYMBOL SD1020YT SD1030YT SD1040YT SD1050YT SD1060YT SD1080YT SD10100YT SD10150YT UNITS VRRM VRMS VDC IAV IFSM VF IR RθJC RθJA TJ TSTG 0.55 20 14 20 30 21 30 40 28 40 50 35 50 10.0 100 0.75 0.2 20 3.0 80 -50 to +125 -50 to +150 O 60 42 60 80 56 80 100 70 100 150 105 150 V V V A A 0.85 0.92 V mA C/W O C C O REV.0-MAR.19.2005 PAGE . 1 RATING AND CHARACTERISTIC CURVES AVERAGE FORWARD CURRENT 25.0 20.0 15.0 10.0 5.0 0 0 PEAK FORWARDSURGE CURRENT, AMPERES 120 100 80 60 40 20 50 100 150 0 1 10 NO. OF CYCLE AT 60HZ 100 CASE TEMPERATURE, OC Fig.1- FORWARD CURRENT DERATING CURVE Fig.2-MAXIMUMNON-REPETITIVEPEAK FORWARD SURGE CURRENT FORWARD CURRENT, AMPERES 10 0 V RRM =20-40V V RRM =50-100V 100 REVERSE CURRENT, mA 10 -1 T J =100 C O 50-60V 10 20-40V 10 -2 1.0 80-100V 10 -3 T J =25 C O 0 20 40 60 80 100 0.1 0.2 0.4 0.6 0.8 1.0 PERCENT OF RATED PEAK REVERSE VOLTAGE, % FORWARD VOLTAGE, VOLTS Fig.4- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTIC Fig.3- TYPICAL REVERSE CHARACTERISTICS REV.0-MAR.19.2005 PAGE . 2