SD640CS_L2_00001

PSD620CS~SD660CS SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS 20~60 V Voltage 6A Current Features  Plastic package has Underwriters Laboratory Flammability Classification 94V-O.  For surface mounted applications in order to optimize board space  Low power loss, High efficiency  High surge capacity  For use in low voltage, high frequency inverters free wheeling, and polarity protection applications o  High temperature soldering guaranteed : 260 C/10 seconds at terminals  Lead free in compliance with EU RoHS 2011/65/EU directive.  Green molding compound as per IEC61249 Std..(Halogen Free) Mechanical Data  Case: TO-252 Molded plastic  Terminals: Solder plated, solderable per MIL-STD-750, Method 2026  Polarity: As marking  Approx. Weight: 0.0104 ounces, 0.297 grams  Marking: Part number o Maximum Ratings (TA=25 C unless otherwise noted) PARAMETER SYMBOL SD620CS SD630CS SD640CS SD650CS SD660CS UNIT Maximum repetitive peak reverse voltage VRRM 20 30 40 50 60 V Maximum rms voltage VRMS 14 21 28 35 42 V VR 20 30 40 50 60 V Maximum dc blocking voltage Maximum average forward rectified current Peak forward surge current : 8.3ms single half sinewave superimposed on rated load Maximum forward voltage at 3A per diode Maximum dc reverse current at rated dc blocking voltage IF(AV) 6 A IFSM 75 A VF o TJ=25 C o Operating junction temperature range Storage temperature range 0.7 0.2 0.1 20 20 V IR mA TJ=100 C Typical thermal resistance 0.55 RJC TJ TSTG o 5 -55 to +125 -55 to +150 -55 to +150 C/W o C o C Note : Both Bonding and Chip structure are available. May 19,2016-REV.02 Page 1 PSD620CS~SD660CS 10.0 =20-30V =40-60V 8.0 6.0 4.0 2.0 0 0 50 150 100 PEAK FORWARDSURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT AMPERES RATING A ND CHARACTERISTIC CURVES 90 75 60 45 30 15 0 1 10 O CASE TEMPERATURE, C 100 NO. OF CYCLE AT 60Hz Fig.1 FORWARD CURRENT DERATING CURVE Fig.2 MAXIMUM NON - REPETITIVE SURGE CURRENT 10 1.0 TJ = 100 C 0.1 TJ = 75 C INSTANTANEOUS FORWARD CURRENT AMPERES INSTANTANEOUS REVERSE CURRENT, mA 50 O O 0.01 O TJ = 25 C V RRM =20-40V V RRM =50-60V .001 0 20 40 60 80 100 20-40V 10 1.0 50-60V O TJ = 25 C Pulse Width = 300 s 1% Duty Cycle 0.1 .2 .3 .4 .5 .6 .7 .8 .9 1.0 1.1 INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF INSTANTANEOUS REVERSE VOLTAGE,(%) Percent of Reverse Voltage (%) Fig.3 TYPICAL REVERSE CHARACTERISTICS Fig.4 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTIC 120 100 80 60 20~30V 40 40~60V 20 0 0 25 50 75 100 125 150 TJ, Junction Temperature (°C) Fig.5 Operating Temperature Derating Curve May 19,2016-REV.02 Page 2 PSD620CS~SD660CS MOUNTING PAD LAYOUT ORDER INFORMATION ˙Packing information T/R – 3K per 13" plastic Reel May 19,2016-REV.02 Page 3 PSD620CS~SD660CS Part No_packing code_Version SD620CS_L2_00001 SD620CS_S2_00001 For example : RB500V-40_R2_00001 ˙Serial number ˙ ˙Version code means HF Part No. ˙Packing size code means 13" ˙Packing type means T/R Packing Code XX Version Code XXXXX Packing type 1st Code Packing size code 2nd Code HF or RoHS 1 Code 2 ~5 Code Tape and Ammunition Box (T/B) A N/A 0 HF 0 serial number Tape and Reel (T/R) R 7" 1 RoHS 1 serial number Bulk Packing (B/P) B 13" 2 Tube Packing (T/P) T 26mm X Tape and Reel (Right Oriented) (TRR) S 52mm Y Tape and Reel (Left Oriented) (TRL) L PANASERT T/B CATHODE UP (PBCU) U FORMING F PANASERT T/B CATHODE DOWN (PBCD) D May 19,2016-REV.02 st nd th Page 4 PSD620CS~SD660CS Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. May 19,2016-REV.02 Page 5