SR25L

SR25L LOW VF SCHOTTKY BARRIER RECTIFIER VOLTAGE FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For surface mounted applications • Low profile package • Built-in strain relief • Metal to silicon rectifier. majority carrier conduction • Low power loss,high efficiency • High surge capacity • For use in low voltage high frequency inverters, free wheeling, and polarity protection applications • In compliance with EU RoHS 2002/95/EC directives 50 Volts CURRENT 2.0 Amperes 0.114(2.90) 0.098(2.50) 0.181(4.60) 0.157(4.00) 0 . 012(0 . 305) 0 . 006(0.152) 0.008(0.203) 0.002(0.051) 0.208(5.28) 0.188(4.80) MECHANICAL DATA • Case: JEDEC DO-214AC molded plastic • Terminals:Solder plated, solderable per MIL-STD-750,Method 2026 • Polarity: Color band denotes cathode end • Standard packaging: 12mm tape (EIA-481) • Weight: 0.002 ounce, 0.067 gram 0.060(1.52) 0.030(0.76) MAXIMUM RATINGS(TA=25oC unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum rms voltage Maximum dc blocking voltage Maximum average forward rectified current Peak forward surge current : 8.3ms single half sine-wave superimposed on rated load Typical Thermal Resistance (Note 1) Operating junction temperature range Storage temperature range SYMBOL VRRM VRMS VDC I F(AV) I FSM RΘJL TJ TSTG VALUE 50 35 50 2 50 20 -55 to + 150 -55 to + 150 o 0.062(1.60) 0.047(1.20) UNIT V V V A A C/W o C C o ELECTRICAL CHARACTERISTICS(TA=25oC unless otherwise noted) PARAMETER Breakdown voltage SYMBOL VBR TEST CONDITIONS I R=1mA I F=1A I F=2A I F=1A I F=2A TA =25oC TA =125oC TA =25oC TA =125oC MIN. 50 TYP. 0.43 0.34 MAX. 0.50 0.48 100 20 UNIT V V V μA mA Instantaneous forward voltage VF Reverse current IR NOTES: 1. Mounted on heatsink (5cm x 5cm x 2pec) copper and areas. December 1,2010-REV.01 PAGE . 1 SR25L CJ, Junction Capacitance (pF) 3 1000 IF, Forward Current (A) 2.5 2 1.5 1 0.5 0 0 25 50 75 100 125 150 100 10 0.1 1 10 100 TL, Lead Temperature (°C) VR, Reverse Bias Voltage (V) Fig.1 Forward Current Derating Curve 10 10 Fig.2 Typical Junction Capacitance IR,Reverse Current (mA) IF, Forward Current (A) TJ = 125°C 1 TJ = 100°C 0.1 TJ = 75°C TJ = 150°C 1 TJ = 125°C TJ = 25°C 0.01 TJ = 25°C 0.001 20 40 60 80 100 TJ = 75°C 0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Percent of Rated Peak Reverse Voltage (%) VF, Forward Voltage (V) Fig.3 Typical Reverse Characteristics Fig.4 Typical Forward Characteristics December 1,2010-REV.01 PAGE . 2 SR25L MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 7.5K per 13" plastic Reel T/R - 1.8Kper 7” plastic Reel LEGAL STATEMENT Copyright PanJit International, Inc 2010 The information presented in this document is believed to be accurate and reliable. The specifications and information herein are subject to change without notice. Pan Jit makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. Pan Jit products are not authorized for use in life support devices or systems. Pan Jit does not convey any license under its patent rights or rights of others. December 1,2010-REV.01 PAGE . 3