SS1040FL-AU_R1_000A1

PSS1040FL-AU SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Voltage 40 V Current 1A SOD-123FL Features  Low forward voltage drop  Deal for automated placement  Low power loss, high efficiency  High surge current capability  Lead free in compliance with EU RoHS 2.0  Green molding compound as per IEC 61249 standard  AEC-Q101 qualified Mechanical Data  Case: SOD-123FL Package  Terminals: Solderable per MIL-STD-750, Method 2026  Approx. Weight: 0.0006 ounces, 0.0173 grams o Maximum Ratings and Thermal Characteristics (TA = 25 C unless otherwise noted) PARAMETER SYMBOL LIMIT UNITS Maximum Repetitive Peak Reverse Voltage VRRM 40 V Maximum Rms Voltage VRMS 28 V Maximum Dc Blocking Voltage VDC 40 V Maximum Average Forward Current IF(AV) 1 A Peak Forward Surge Current: 8.3 ms single half sine-wave superimposed on rated load per diode IFSM 40 A CJ 60 pF Typical Junction Capacitance Measured at 1 MHz And Applied VR = 4V Typical Thermal Resistance Operating Junction Temperature Range Storage Temperature Range August 24,2017-REV.14 RθJA (1) 200 RθJC (2) 32 TJ TSTG o C/W -55~150 o -55~150 o C C Page 1 PSS1040FL-AU o Electrical Characteristics (TA = 25 C unless otherwise noted) PARAMETER SYMBOL TEST CONDITION o IF = 0.5 A, TJ = 25 C o Forward Voltage VF IR MAX. - 0.41 - - - 0.55 - 0.31 - IF = 1 A, TJ = 125 C - 0.4 - o - 3.3 - o VR = 40 V, TJ = 25 C - - 30 o - 3 - IF = 0.5 A, TJ = 125 C VR = 32 V, TJ = 25 C Reverse Current TYP. o IF = 1 A, TJ = 25 C o (3) MIN. VR = 40 V, TJ = 125 C UNITS V uA mA NOTES: 1. Mounted on a FR4 PCB, single-sided copper, mini pad. 2. Mounted on a FR4 PCB, single-sided copper, with 100 cm2 copper pad area 3. Short duration pulse test used to minimize self-heating effect August 24,2017-REV.14 Page 2 PSS1040FL-AU TYPICAL CHARACTERISTIC CURVES 1000 CJ, Junction Capacitance (pF) IF, Forward Current (A) 1.2 1 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 100 10 1 0 150 12 TA, Ambient Temperature (°C) Fig.1 Forward Current Derating Curve 48 60 10 1 IF, Forward Current (A) IR, Reverse Current (mA) 36 Fig.2 Typical Junction Capacitance 10 TJ = 125°C TJ = 150°C 0.1 TJ = 75°C 0.01 0.001 TJ = 150°C 1 TJ = 125°C 0.1 TJ = 75°C TJ = 25°C TJ = 25°C 0.01 0.0001 20 40 60 80 100 Percent of Rated Reverse Voltage (%) Fig.3 Typical Reverse Characteristics Percent of Reverse Voltage (%) 24 VR, Reverse Bias Voltage (V) 0 0.15 0.3 0.45 0.6 VF, Forward Voltage (V) Fig.4 Typical Forward Characteristics 120 100 80 60 40 20 0 0 25 50 75 100 125 150 TJ, Junction Temperature (°C) Fig.5 Operating Temperature Derating Curve August 24,2017-REV.14 Page 3 PSS1040FL-AU Part No Packing Code Version Part No Packing Code Package Type Packing Type Marking Version SS1040FL-AU_R1_000A1 SOD-123FL 3K / 7" Reel G4 Halogen free Packaging Information & Mounting Pad Layout 0.115(2.90) 0.106(2.70) 0.145(3.70) 0.137(3.50) 0.044(1.10) 0.031(0.80) 0.075(1.90) 0.067(1.70) SOD-123FL Dimension Unit: inch(mm) SOD-123FL Pad Layout Unit: inch(mm) 0.044(1.10) 0.035(0.90) 0.008(0.20) 0.004(0.10) 0.030(0.75) 0.017(0.45) August 24,2017-REV.14 Page 4 PSS1040FL-AU Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. August 24,2017-REV.14 Page 5