SS1060FL_R1_00001

SS1020FL~SS10200FL SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE 20 to 200 Volt SOD-123FL 1 Ampere CURRENT Unit：inch(mm) 0.075(1.90) 0.067(1.70) • Fast switching speed • Surface mount package ideally suited for automatic insertion • Low power loss, high efficiency • Lead free in compliance with EU RoHS 2.0 • Green molding compound as per IEC 61249 standard 0.044(1.10) 0.031(0.80) FEATURES 0.115(2.90) 0.106(2.70) 0.044(1.10) 0.035(0.90) MECHANICAL DATA • Case: SOD-123FL, Plastic • Terminals: Solderable per MIL-STD-750, Method 2026 0.008(0.20) 0.004(0.10) 0.145(3.70) 0.137(3.50) • Apporx. Weight: 0.0006 ounces, 0.0173 grams 0.030(0.75) 0.017(0.45) • Polarity: Color band denotes cathode end 1 2 Cathode Anode o ABSOLUTE RATINGS (TA=25 C unless otherwise noted) PARAMETER SYMBOL SS1020FL SS1030FL SS1040FL SS1060FL SS10100FL SS10150FL SS10200FL UNITS - G2 G3 G4 G6 G10 G15 G20 - VR 20 30 40 60 100 150 200 V Peak Reversr Voltage VRRM 20 30 40 60 100 150 200 V Average Rectified Current IF(AV) 1 A Forward Current RMS, D=0.5 IF(RMS) 2 A Marking Code Reverse Voltage Non-repetitive Peak Forward Surge Current at t=8.3ms IFSM 40 30 A o ELECTRICAL AND THERMAL CHARACTERISTICS (TA=25 C unless otherwise noted) PARAMETER SYMBOL SS1020FL SS1030FL SS1040FL SS1060FL SS10100FL SS10150FL SS10200FL UNITS Minimum Reverse Breakdown Voltage at I R=500μA VR 20 30 40 60 100 150 200 V Maximum Forward Voltage at I F=1A VF 0.7 0.8 Reverse Leakage Current at VRRM IR 30 RθJC RθJA 32 200 Typical Thermal Resistance (Note 1) (Note 2) Typical Junction Capacitance Rating at VR=0V Operating Junction Temperature and Storage Temperature Range CJ TJ,TSTG 0.55 155 125 -55 to +150 0.85 V μA O 100 85 C/W pF O C Note:1.Mounted on a FR4 PCB, single-sided copper, with 100cm2 copper pad area 2.Mounted on a FR4 PCB, single-sided copper, mini pad. June 14,2017­REV.13 PAGE . 1 IF, Forward Current (A) 1.25 1 0.75 0.5 0.25 0 0 25 50 75 100 125 150 TC, Case Temperature (°C) CJ, Junction Capacitance (pF) SS1020FL~SS10200FL Fig.1 Forward Current Derating Curve IR, Reverse Current (mA) IR, Reverse Current (mA) 10 TJ = 125°C 0.1 TJ = 75°C 0.01 0.001 TJ= 25°C 0.0001 20 40 60 80 10 100V 150- 200V 1 0.1 1 10 100 VR, Reverse Bias Voltage (V) TJ = 150°C 60V 1 TJ = 125°C 0.1 TJ = 75°C 0.01 0.001 TJ = 25°C 0.0001 100 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig.3 Typical Reverse Characteristics Fig.4 Typical Reverse Characteristics 1000 1000 TJ = 150°C IR,Reverse Current (μA) IR,Reverse Current (μA) 100 10 Percent of Rated Peak Reverse Voltage (%) 100 TJ = 125°C 10 1 TJ = 75°C 0.1 100V 0.01 TJ = 25°C TJ = 150°C 100 20 40 60 80 TJ = 125°C 10 TJ = 75°C 1 150-200V 0.1 TJ= 25°C 0.01 0.001 20 100 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Percent of Rated Peak Reverse Voltage (%) Fig.6 Typical Reverse Characteristics Fig.5 Typical Reverse Characteristics 1 IF, Forward Current (A) IF, Forward Current (A) 1 20~40V TJ = 150°C TJ = 125°C TJ = 75°C TJ = 25°C 0.1 60V TJ = 150°C TJ = 125°C TJ = 75°C TJ = 25°C 0.1 0 0.2 0.4 0.6 VF, Forward Voltage (V) Fig.7 Typical Forward Characteristics June 14,2017­REV.13 60V 100 TJ = 150°C 1 20~40V Fig.2 Typical Junction Capacitance 100 20~40V 1000 0.8 0 0.2 0.4 0.6 0.8 VF, Forward Voltage (V) Fig.8 Typical Forward Characteristics PAGE . 2 SS1020FL~SS10200FL 1 IF, Forward Current (A) IF, Forward Current (A) 1 100V TJ = 150°C TJ = 125°C TJ = 75°C TJ = 25°C 0.1 150-200V TJ = 150°C TJ = 125°C TJ = 75°C TJ = 25°C 0.1 0.2 0.4 0.6 0.8 1 VF, Forward Voltage (V) 0.2 0.4 0.6 0.8 1 VF, Forward Voltage (V) Fig.9 Typical Forward Characteristics Fig.10 Typical Forward Characteristics Percent of Reverse Voltage (%) 120 100 80 60 40 20 0 0 25 50 75 100 125 150 TJ, Junction Temperature (°C) Fig.11 Operating Temperature Derating Curve June 14,2017­REV.13 PAGE . 3 SS1020FL~SS10200FL MOUNTING PAD LAYOUT SOD-123FL Unit：inch(mm) 0.167 (4.25) 0.048 (1.22) 0.122 (3.10) 0.045 (1.15) ORDER INFORMATION • Packing information T/R - 10K per 13" plastic Reel T/R - 3K per 7" plastic Reel June 14,2017­REV.13 PAGE . 4 SS1020FL~SS10200FL Part No_packing code_Version SS1020FL_R1_00001 SS1020FL_R2_00001 For example : RB500V-40_R2_00001 Serial number Version code means HF Packing size code means 13" Part No. Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING June 14,2017­REV.13 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 5 SS1020FL~SS10200FL Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. June 14,2017­REV.13 PAGE . 6