SS14AL

SS12L SERIES LOW VF SURFACE MOUNT SCHOTTKY RECTIFIER 20 to 90 Volt VOLTAGE CURRENT 1.0 Ampere FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For surface mounted applications • Low profile package • Built-in strain relief • Metal to silicon rectifier. majority carrier conduction • Low power loss,high efficiency • High surge capacity • High current capacity, low VF • For use in low voltage high frequency inverters, free wheeling, and polarity protection applications • Lead free in compliance with EU RoHS 2.0 • Green molding compound as per IEC 61249 standard MECHANICAL DATA • Case: JEDEC DO-214AC molded plastic • Terminals:Solder plated, solderable per MIL-STD-750,Method 2026 • Polarity: Color band denotes cathode end • Standard packaging: 12mm tape (EIA-481) • Weight: 0.0023 ounces, 0.0679 grams MAXIMUM RATINGS(TA=25oC unless otherwise noted) PARAMETER SYMBOL SS12L SS13L SS14L SS14AL SS16L SS19L UNIT Maximum repetitive peak reverse voltage VRRM 20 30 40 45 60 90 V Maximum rms voltage VRMS 14 21 28 31.5 42 64 V VR 20 30 40 45 60 90 V Maximum dc blocking voltage Maximum average forward rectified current I F(AV) Peak forward surge current : 8.3ms single half sine-wave superimposed on rated load I FSM Maximum thermal resistance RΘJA RΘJL Operating junction temperature range Storage temperature range 1 A 30 40 A 120 40 o C/W TJ -55 to + 125 -55 to +150 o TSTG -55 to + 150 -55 to +150 o C C ELECTRICAL CHARACTERISTICS(TA=25oC unless otherwise noted) SYMBOL TEST CONDITIONS Maximum instantaneous forward voltage (Notes 1) VF I F=1.0A Maximum reverse current at rated peak reverse voltage IR - PARAMETER SS12L SS13L SS14L SS14AL SS16L 0.42 0.45 200 100 0.50 SS19L UNIT 0.68 V 80 μA NOTES: 1. Pulse test : 300 μs pulse width, 1% duty cycle. March 28,2018­REV.05 PAGE . 1 1 1000 20~60V 90V 0.8 CJ, Junction Capacitance (pF) IF, Forward Current (A) SS12L SERIES 0.6 0.4 0.2 45V 20~40V 90V 0 0 25 50 75 100 125 60V 100 10 150 0.1 Fig.1 Forward Current Derating Curve 100 20V 30V IR,Reverse Current (mA) IR,Reverse Current (mA) 100 Fig.2 Typical Junction Capacitance 1 40V 0.1 0.01 45V 60V 0.001 90V TJ = 25°C 0.0001 20 40 60 80 60V 45V 90V 20~40V TJ = 25°C 0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 VF, Forward Voltage (V) Fig.5 Typical Forward Characteristics March 28,2018­REV.05 40V 60V 45V 90V 0.1 TJ = 100°C 0.01 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig.4 Typical Reverse Characteristics IF, Forward Current (A) 10 30V 1 20 Fig.3 Typical Reverse Characteristics 1 20V 10 100 Percent of Rated Peak Reverse Voltage (%) IF, Forward Current (A) 10 VR, Reverse Bias Voltage (V) TL, Lead Temperature (°C) 0 1 10 45V 1 90V 20~40V 60V 0.1 TJ = 100°C 0.01 0 0.2 0.4 0.6 0.8 VF, Forward Voltage (V) Fig.6 Typical Forward Characteristics PAGE . 2 SS12L SERIES MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 7.5K per 13" plastic Reel T/R - 1.8Kper 7” plastic Reel March 28,2018­REV.05 PAGE . 3 SS12L SERIES Part No_packing code_Version SS12L_R1_00001 SS12L_R2_00001 For example : RB500V-40_R2_00001 Serial number Version code means HF Part No. Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING March 28,2018­REV.05 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 4 SS12L SERIES Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. March 28,2018­REV.05 PAGE . 5