SS2040LL_R1_00001

SS2040LL SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER 40 Volt 2 Ampere CURRENT 0.075(1.90) 0.067(1.70) FEATURES • Surface mount package ideally suited for autonatic insertion • Low power loss, high efficieucy • Low forward voltage • Lead free in compliance with EU RoHS 2.0 • Green molding compound as per IEC 61249 standard 0.115(2.90) 0.106(2.70) MECHANICAL DATA 0.145(3.70) 0.137(3.50) • Case: SOD-123FL, Plastic 0.044(1.10) 0.031(0.80) VOLTAGE 0.044(1.10) 0.035(0.90) 0.008(0.20) 0.004(0.10) • Terminals: Solderable per MIL-STD-750, Method 2026 0.030(0.75) 0.017(0.45) • Approx. Weight: 0.0006 ounces, 0.0173 grams • Polarity: Color band denotes cathode end • Marking: R4 1 Cathode 2 Anode ABSOLUTE RATINGS(TA=25OC unless otherwise specified) PARAMETER SYMBOL VALUE UNITS VR 40 V Peak Reversr Voltage VRRM 40 V Average Rectified Current IF(AV) 2 A Non-repetitive Peak Forward Surge Current at t=8.3ms IFSM 50 A SYMBOL VALUE UNITS Minimum Reverse Breakdown Voltage at I R=500μA VR 40 V Maximum Forward Voltage at I F=2.0A VF 0.45 V Reverse Leakage Current at VRRM IR 500 μA R θJA 250 T J ,T S TG -50 to +125 Reverse Voltage ELECTRICAL AND THERMAL CHARACTERISTICS(TA=25OC unless otherwise specified) PARAMETER Typical Thermal Resistance,Junction to Ambient O p e r a ti ng J unc ti o n a nd S to r a g e Te mp e r a tur e R a ng e (Note 1) O C/W O C Note.1 Mounted on PCB with minimum pad layout. June 20,2017­REV.05 PAGE . 1 CJ, Junction Capacitance (pF) SS2040LL IF, Forward Current (A) 2.5 2 1.5 1 0.5 0 0 25 50 75 100 125 150 1000 100 10 0 20 30 40 VR, Reverse Bias Voltage (V) TL,Lead Temperature (°C) Fig.1 Forward Current Derating Curve Fig.2 Typical Junction Capacitance 100 10 IF, Forward Current (A) IR,Reverse Current (mA) 10 10 1 TJ = 125°C TJ = 75°C TJ = 100°C 0.1 TJ = 25°C 0.01 20 40 60 80 100 TJ = 125°C TJ = 100°C 1 TJ = 25°C TJ = 75°C 0.1 0 Percent of Rated Peak Reverse Voltage (%) Fig.3 Typical Reverse Characteristics 0.1 0.2 0.3 0.4 0.5 0.6 0.7 VF, Forward Voltage (V) Fig.4 Typical Forward Characteristics Reverse Voltage (V) 50 40 30 20 10 0 0 25 50 75 100 125 TJ, Junction Temperature (°C) Fig.5 Operating Temperature Derating Curve June 20,2017­REV.05 PAGE . 2 SS2040LL MOUNTING PAD LAYOUT 0.167 (4.25) 0.048 (1.22) 0.122 (3.10) 0.045 (1.15) ORDER INFORMATION • Packing information T/R - 10K per 13" plastic Reel T/R - 3K per 7" plastic Reel June 20,2017­REV.05 PAGE . 3 SS2040LL Part No_packing code_Version SS2040LL_R1_00001 SS2040LL_R2_00001 For example : RB500V-40_R2_00001 Serial number Version code means HF Packing size code means 13" Part No. Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING June 20,2017­REV.05 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 4 SS2040LL Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. June 20,2017­REV.05 PAGE . 5