SVM1045VB_R2_00001

SVM1045VB LOW VF SCHOTTKY RECTIFIER VOLTAGE 45 Volt CURRENT 10 Ampere 0.172(4.35) 0.167(4.25) FEATURES • Ideal for automated placement • Low forward voltage drop, low power loss • Low thermal resistance • Lead free in compliance with EU RoHS 2011/65/EU directive • Green molding compound as per IEC61249 Std. . (Halogen Free) 0.014(0.35) 0.009(0.25) 0.048(1.20) 0.039(1.00) • High efficiency Operation 0.243(6.15) 0.238(6.05) 0.136(3.45) • Terminals : Solderable per MIL-STD-750, Method 2026 • Weight : 0.0038 ounces, 0.1088 grams 0.052(1.30) 0.044(1.10) 0.083(2.10) • Case : TO-277B, Plastic 0.076(1.95) MECHANICAL DATA 0.128(3.25) 0.085(2.15) 0.282(7.15) 0.269(6.85) 0.193(4.90) 0.181(4.60) • Marking : Part number 0.053(1.35) 0.045(1.15) MAXIMUM RATINGS(TA=25oC unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Maximum Recurrent Peak Reverse Voltage VRRM 45 V Maximum RMS Voltage VRMS 32 V VR 45 V Maximum Average Rectified Output Current I F(AV) 10 A Peak Forward Surge Current:8.3ms single half sine-wave superimposed on rated load I FSM 275 A RΘJA RΘJC 110 8 TJ,TSTG -55 to + 150 Maximum DC Blocking Voltage Typical Thermal Resistance ,Junction to Ambient Junction to Case (Note 2) (Note 1) Operating junction temperature range and Storage temperature range o C/W o C 2 NOTES:1.Mounted on a FR4 PCB, single-sided copper, with 100cm copper pad area. 2.Mounted on a FR4 PCB, single-sided copper, mini pad. March 28,2016-REV.01 PAGE . 1 SVM1045VB ELECTRICAL CHARACTERISTICS(TA=25oC unless otherwise noted) PARAMETER Breakdown voltage Instantaneous forward voltage SYMBOL TEST CONDITIONS VBR I R=0.5mA VF I F=3A I F=5A I F=10A I F=3A I F=5A I F=10A VR=36V Reverse current IR TA=25oC TA=125oC TA=25oC o VR=45V March 28,2016-REV.01 TA=25oC TA=25 C TA=125oC MIN. TYP. MAX. UNIT 45 - - V - 0.34 0.38 0.44 0.27 0.32 0.41 0.47 - - 32 - μA - 8.6 0.25 - mA mA V V PAGE . 2 IF, Forward Current (A) 12 10 8 6 4 2 0 0 25 50 75 100 125 150 TC, Case Temperature (°C) CJ, Junction Capacitance (pF) SVM1045VB Fig.1 Forward Current Derating Curve 1000 100 10 1 1 10 100 VR, Reverse Bias Voltage (V) Fig.2 Typical Junction Capacitance 10 IF, Forward Current (A) 100 IR,Reverse Current (mA) 10000 10 TJ = 150°C 1 TJ = 125°C TJ = 75°C 0.1 0.01 TJ = 25°C 0.001 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig.3 Typical Reverse Characteristics TJ = 150°C TJ = 125°C 1 TJ = 75°C TJ = 25°C 0.1 0 0.2 0.4 0.6 VF, Forward Voltage (V) Fig.4 Typical Forward Characteristics VR, Reverse Voltage (V) 50 40 30 20 10 0 0 25 50 75 100 125 150 TJ, Junction Temperature (°C) Fig.5 Operating Temperature Derating Curve March 28,2016-REV.01 PAGE . 3 SVM1045VB MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 5K per 13" plastic Reel March 28,2016-REV.01 PAGE . 4 SVM1045VB Part No_packing code_Version SVM1045VB_R2_00001 For example : RB500V-40_R2_00001 Serial number Version code means HF Part No. Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING March 28,2016-REV.01 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 5 SVM1045VB Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. March 28,2016-REV.01 PAGE . 6