SVM1550VB_R2_00001

SVM1550VB ULTRA LOW VF SCHOTTKY RECTIFIER VOLTAGE 50 Volt CURRENT 15 Ampere • Ideal for automated placement • Ultra low forward voltage drop, low power loss 0.048(1.20) 0.039(1.00) • High efficiency operation • Low thermal resistance 0.014(0.35) 0.009(0.25) 0.172(4.35) 0.167(4.25) FEATURES 0.243(6.15) 0.238(6.05) • Ultra thin profile package for space constrained utilization 0.136(3.45) MECHANICAL DATA 0.076(1.95) • Green molding compound as per IEC61249 Std. . (Halogen Free) 0.128(3.25) 0.085(2.15) • Lead free in compliance with EU RoHS 2011/65/EU directive 0.052(1.30) 0.044(1.10) 0.083(2.10) 0.282(7.15) 0.269(6.85) • Package suitable for automated handling 0.193(4.90) 0.181(4.60) • Case : TO-277B, Plastic 0.053(1.35) 0.045(1.15) • Terminals : Solderable per MIL-STD-750, Method 2026 • Weight : 0.0038 ounces, 0.1088 grams • Marking : Part number MAXIMUM RATINGS(TA=25oC unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 V Maximum RMS Voltage VRMS 35 V VR 50 V Maximum Average Rectified Output Current I F(AV) 15 A Peak Forward Surge Current : 8.3ms single half sine-wave superimposed on rated load I FSM 280 A RΘJA RΘJC 110 5.5 TJ,TSTG -55 to + 150 Maximum DC Blocking Voltage Typical Thermal Resistance (Note 1) (Note 2) Operating Junction Temperature Range And Storage Temperature Range o C/W o C NOTES : 1.Mounted on a FR4 PCB, single-sided copper, mini pad. 2.Mounted on a 10cm*10cm*0.5mm copper pad area June 7,2016-REV.01 PAGE . 1 SVM1550VB o ELECTRICAL CHARACTERISTICS (TA=25 C unless otherwise noted) PARAMETER Breakdown voltage Instantaneous forward voltage SYMBOL TEST CONDITIONS MAX. UNIT I R=0.5mA TA=25oC 50 - - V TA=25oC - 0.28 0.35 0.45 0.51 V VF I F=1A I F=5A I F=15A I F=1A I F=5A TA=125oC - 0.18 0.28 - V - 60 - μA - 25 320 - μA mA IR VR=50V June 7,2016-REV.01 TYP. VBR VR=40V Reverse current MIN. TA=25oC TA=125oC PAGE . 2 SVM1550VB CJ, Junction Capacitance (pF) IF, Forward Current (A) 17.5 15 12.5 10 7.5 5 2.5 0 0 25 50 75 100 125 150 TC, Case Temperature (°C) Fig.1 Forward Current Derating Curve 100 10 1 1 10 100 VR, Reverse Bias Voltage (V) Fig.2 Typical Junction Capacitance 100 100 TJ = 150°C IF, Forward Current (A) Reverse Voltage (V) IR, Reverse Current (mA) 1000 10 TJ = 125°C 1 TJ = 75°C 0.1 TJ = 25°C 0.01 20 40 60 80 TJ = 150°C 10 TJ = 125°C 1 TJ = 75°C 0.1 TJ = 25°C 0.01 100 0 Percent of Rated Peak Reverse Voltage (%) Fig.3 Typical Reverse Characteristics 0.2 0.4 0.6 0.8 VF, Forward Voltage (V) Fig.4 Typical Forward Characteristics 60 Reverse Voltage (V) 50 40 30 20 10 0 0 25 50 75 100 125 150 TJ, Junction Temperature (°C) Fig.5 Operating Temperature Derating Curve June 7,2016-REV.01 PAGE . 3 SVM1550VB MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 5K per 13" plastic Reel June 7,2016-REV.01 PAGE . 4 SVM1550VB Part No_packing code_Version SVM1550VB_R2_00001 For example : RB500V-40_R2_00001 Serial number Part No. Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING June 7,2016-REV.01 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 5 SVM1550VB Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. June 7,2016-REV.01 PAGE . 6