SX1H15_R1_00001

PMBR1H150 \ SX1H15 ULTRA LOW IR SCHOTTKY BARRIER RECTIFIERS Voltage 150 V 1A Current DO-41 Features  Plastic package has Underwriters Laboratory Flammability Classification 94V-O. Flame Retardant Epoxy Molding Compound.  Low power loss, high efficiency.  High current capability  High junction temperature capability  Lead free in compliance with EU RoHS 2011/65/EU directive  Green molding compound as per IEC61249 Std. . (Halogen Free) (SMA) SMA Mechanical Data  Case: SMA, DO-41 package  Terminals: solder plated, solderable per MIL-STD-750,Method 2026  SMA Weight: 0.0024 ounces, 0.068 grams.  DO-41 Weight: 0.012 ounces, 0.336 grams.  Marking: Part number 150V SMA SX1H15 DO-41 MBR1H150 o Maximum Ratings And Electrical Characteristics (TA=25 C unless otherwise noted) PARAMETER SYMBOL 150V UNIT Maximum repetitive peak reverse voltage VRRM 150 V Maximum rms voltage VRMS 105 V VR 150 V IF(AV) 1 A IFSM 30 A VF 0.85 V 0.5 A 1 mA Maximum dc blocking voltage Maximum average forward rectified current Peak forward surge current : 8.3ms single half sinewave superimposed on rated load Maximum forward voltage at 1A Maximum dc reverse current at rated dc blocking voltage Typical thermal resistance Operating junction temperature range Storage temperature range o TJ =25 C o TJ =125 C SMA(Note 1) DO-41(Note 2) IR 35 RJL TJ TSTG 47 o C/W -55 to +175 o -55 to +175 o C C 2 Note : 1. Mounted on a FR4 PCB, single-sided copper, with 100cm copper pad area 2. The testing condition of the thermal resistance (junction to lead) is based on 10 mm lead length between two 10cm x 10cm FR4 PCB single-sided copper pad January 7,2015-REV.00 Page 1 1.2 1 0.8 0.6 0.4 0.2 per diode 0 0 25 50 75 100 125 150 TC, Case Temperature (°C) 100 10 per diode 1 1 10 100 VR, Reverse Bias Voltage (V) Fig.2 Typical Junction Capacitance 100 IF, Forward Current (A) IR, Reverse Current (mA) Fig.1 Forward Current Derating Curve CJ, Junction Capacitance (pF) IF, Forward Current (A) PMBR1H150 \ SX1H15 10 1 TJ = 125°C 0.1 TJ = 150°C TJ = 175°C TJ = 75°C 0.01 per diode 0.001 TJ = 25°C 0.0001 20 40 60 80 100 TJ = 175°C 1 TJ = 150°C TJ = 25°C per diode 0.01 0 Percent of Rated Peak Reverse Voltage (%) Fig.3 Typical Reverse Characteristics January 7,2015-REV.00 TJ = 75°C TJ = 125°C 0.1 0.2 0.4 0.6 0.8 1 VF, Forward Voltage (V) Fig.4 Typical Forward Characteristics Page 2 PMBR1H150 \ SX1H15 MOUNTING PAD LAYOUT ORDER INFORMATION ˙Packing information T/R – 7.5K per 13" plastic Reel T/R – 1.8K per 7" plastic Reel January 7,2015-REV.00 Page 3 0.114(2.90) 0.098(2.50) 0.008(0.203) 0.002(0.051) 0.208(5.28) 0.188(4.80) January 7,2015-REV.00 0.205(5.2) 0.160(4.1) 0.181(4.60) 0.157(4.00) 0 . 012(0 . 305) 0 . 006(0.152) 0.060(1.52) 0.030(0.76) 0.034(0.86) 0.028(0.71) 1.0(25.4)MIN. 0.062(1.60) 0.047(1.20) PMBR1H150 \ SX1H15 0.107(2.7) 0.080(2.0) Page 4 PMBR1H150 \ SX1H15 Part No_packing code_Version SX1H15_R1_00001 SX1H15_R2_00001 MBR1H150_AY_00001 MBR1H150_AY_10001 MBR1H150_B0_00001 MBR1H150_B0_10001 MBR1H150_R2_00001 MBR1H150_R2_10001 For example : RB500V-40_R2_00001 ˙Serial number ˙ ˙Version code means HF Part No. ˙Packing size code means 13" ˙Packing type means T/R Packing Code XX Version Code XXXXX Packing type 1st Code Packing size code 2nd Code HF or RoHS 1st Code 2nd~5th Code Tape and Ammunition Box (T/B) A N/A 0 HF 0 serial number Tape and Reel (T/R) R 7" 1 RoHS 1 serial number Bulk Packing (B/P) B 13" 2 Tube Packing (T/P) T 26mm X Tape and Reel (Right Oriented) (TRR) S 52mm Y Tape and Reel (Left Oriented) (TRL) L PANASERT T/B CATHODE UP (PBCU) U FORMING F PANASERT T/B CATHODE DOWN (PBCD) D January 7,2015-REV.00 Page 5 PMBR1H150 \ SX1H15 Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. January 7,2015-REV.00 Page 6