SX34LF

SX34LF ULTRA LOW VF SCHOTTKY RECTIFIER VOLTAGE 40 Volt 3 Ampere CURRENT FEATURES • Ideal for automated placement • Ultra low forward voltage drop, low power loss • High efficiency operation • Low thermal resistance • Ultra thin profile package for space constrained utilization • Package suitable for automated handling • Lead free in compliance with EU RoHS 2011/65/EU directive • Green molding compound as per IEC61249 Std. . (Halogen Free) MECHANICAL DATA • Case : SMAF Molded Plastic • Terminals : Solderable per MIL-STD-750, Method 2026 • Polarity : Color band denotes cathode end • Standard packaging : 12mm tape (EIA-481) • Weight : 0.0011 ounces, 0.0328 grams • Marking : Part number 1 Cathode 2 Anode MAXIMUM RATINGS(TA=25oC unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Maximum Recurrent Peak Reverse Voltage VRRM 40 V Maximum RMS Voltage VRMS 28 V VR 40 V Maximum Average Rectified Output Current I F(AV) 3 A Peak Forward Surge Current : 8.3ms single half sine-wave superimposed on rated load I FSM 100 A RΘJC RΘJA 20 150 TJ,TSTG -55 to + 150 Maximum DC Blocking Voltage Typical Thermal Resistance (Note 1) (Note 2) Operating Junction Temperature Range And Storage Temperature Range o C/W o C NOTES:1.Mounted on 48cm 2 FR-4 PCB Board. 2.Mounted on a FR4 PCB, single-sided copper, mini pad. March 23,2016-REV.01 PAGE . 1 SX34LF o ELECTRICAL CHARACTERISTICS (TA=25 C unless otherwise noted) PARAMETER Breakdown voltage Instantaneous forward voltage SYMBOL VBR VF TEST CONDITIONS I R=1mA MAX. UNIT 40 - - V TJ=25oC - 0.37 0.44 0.49 V I F=1A I F=3A TJ=125oC - 0.25 0.35 - V - 12 - μA - 15 100 - μA mA IR VR=40V March 23,2016-REV.01 TYP. I F=1A I F=3A VR=32V Reverse current MIN. TJ=25oC TJ=125oC PAGE . 2 SX34LF CJ, Junction Capacitance (pF) IF, Forward Current (A) 3.5 3 2.5 2 1.5 1 0.5 0 0 25 50 75 100 125 150 TC, Case Temperature (°C) Fig.1 Forward Current Derating Curve 1000 100 10 0.1 10 100 VR, Reverse Bias Voltage (V) Fig.2 Typical Junction Capacitance 100 IR, Reverse Current (mA) 1 10 IF, Forward Current (A) TJ = 150°C 10 TJ = 125°C 1 0.1 TJ = 75°C 0.01 TJ = 25°C 0.001 TJ = 150°C TJ = 125°C 1 TJ = 25°C 0.1 TJ = 75°C 0.01 8 16 24 32 40 0 VR , Peak Reverse Voltage (V) 0.2 0.4 0.6 VF, Forward Voltage (V) Fig.3 Typical Reverse Characteristics Fig.4 Typical Forward Characteristics VR, Reverse Voltage (V) 50 40 30 20 10 0 0 25 50 75 100 125 150 TJ, Junction Temperature (°C) Fig.5 Operating Temperature Derating Curve March 23,2016-REV.01 PAGE . 3 SX34LF MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 10K per 13" plastic Reel T/R - 3K per 7" plastic Reel March 23,2016-REV.01 PAGE . 4 SX34LF Part No_packing code_Version SX34LF_R2_00001 For example : RB500V-40_R2_00001 Serial number Part No. Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING March 23,2016-REV.01 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 5 SX34LF Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. March 23,2016-REV.01 PAGE . 6