SXM36V_R1_00001

PSXM36V ULTRA LOW VF SCHOTTKY BARRIER RECTIFIER Voltage 60 V 3A Current Features         Ideal for automated placement Ultra low forward voltage drop, low power loss High efficiency operation Low thermal resistance Ultra thin profile package for space constrained utilization Easy pick and place package suitable for automated handling Lead free in compliance with EU RoHS 2.0 Green molding compound as per IEC 61249 standard Mechanical Data       Case: SMA Molded Plastic Terminals: Solder plated, solderable per MIL-STD-750,Method 2026 Polarity : Color band denotes cathode end Standard packaging: 12mm tape (EIA-481) Weight: 0.0024 ounces, 0.068 grams Marking: Part number o Maximum Ratings And Electrical Characteristics (TA=25 C unless otherwise noted) PARAMETER SYMBOL LIMIT UNIT Maximum repetitive peak reverse voltage VRRM 60 V Maximum rms voltage VRMS 42 V VR 60 V IF(AV) 3 A IFSM 80 A CJ 200 pF (Note 2) RθJA 150 (Note 1) RθJC 20 TJ -55 to +150 o TSTG -55 to +150 o Maximum dc blocking voltage Maximum average forward rectified current Peak forward surge current : 8.3ms single half sinewave superimposed on rated load Typical junction capacitance (VR=4V,f=1MHz) Typical thermal resistance Operating junction temperature range Storage temperature range o C/W C C Note : 1. Mounted on a FR4 PCB, single-sided copper, with 100cm² copper pad area. 2. Mounted on a FR4 PCB, single-sided copper, mini pad. June 18,2019-REV.01 Page 1 PSXM36V o Electrical Characteristics (TA=25 C unless otherwise noted) PARAMETER Breakdown voltage SYMBOL VBR TEST CONDITION IR=0.5mA IF=1A Instantaneous forward voltage VF IF=3A IF=1A IF=3A VR=48V Reverse current June 18,2019-REV.01 IR MIN. TYP. MAX. UNITS 60 - - V - 0.34 - - 0.45 0.5 - 0.27 - - 0.43 - - 35 - A TJ=25 C - - 220 A o - 10 - mA o TJ=25 C o TJ=25 C o TJ=125 C o TJ=25 C o VR=60V TJ=125 C V V Page 2 3.5 CJ, Junction Capacitance (pF) IF, Forward Current (A) PSXM36V 3 2.5 2 1.5 1 0.5 0 0 25 50 75 100 125 150 TC, Case Temperature (°C) Fig.1 Forward Current Derating Curve 10000 1000 100 10 1 1 100 VR, Reverse Bias Voltage (V) Fig.2 Typical Junction Capacitance 100 IR, Reverse Current (mA) 10 100 IF, Forward Current (A) TJ = 150°C 10 TJ = 125°C 1 TJ = 75°C 0.1 TJ = 25°C 0.01 10 TJ = 150°C TJ = 125°C 1 TJ = 25°C 0.1 TJ = 75°C 0.01 20 40 60 80 100 0 Percent of Rated Peak Reverse Voltage (%) Fig.3 Typical Reverse Characteristics 0.2 0.4 0.6 0.8 VF, Forward Voltage (V) Fig.4 Typical Forward Characteristics 70 Reverse Voltage (V) 60 50 40 30 20 10 0 0 25 50 75 100 125 150 TJ, Junction Temperature (°C) Fig.5 Operating Temperature Derating Curve June 18,2019-REV.01 Page 3 PSXM36V MOUNTING PAD LAYOUT ORDER INFORMATION ˙Packing information T/R – 7.5K per 13" plastic Reel T/R – 1.8K per 7" plastic Reel June 18,2019-REV.01 Page 4 PSXM36V Part No_packing code_Version SXM36V_R1_00001 SXM36V_R2_00001 For example : RB500V-40_R2_00001 ˙Serial number ˙ ˙Version code means HF Part No. ˙Packing size code means 13" ˙Packing type means T/R Packing Code XX Version Code XXXXX st nd st nd th Packing type 1 Code Packing size code 2 Code HF or RoHS 1 Code 2 ~5 Code Tape and Ammunition Box (T/B) A N/A 0 HF 0 serial number Tape and Reel (T/R) R 7" 1 RoHS 1 serial number Bulk Packing (B/P) B 13" 2 Tube Packing (T/P) T 26mm X Tape and Reel (Right Oriented) (TRR) S 52mm Y Tape and Reel (Left Oriented) (TRL) L PANASERT T/B CATHODE UP (PBCU) U FORMING F PANASERT T/B CATHODE DOWN (PBCD) D June 18,2019-REV.01 Page 5 PSXM36V Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. June 18,2019-REV.01 Page 6