UF1608FCT

DATA SHEET UF1600FCT~UF1608FCT ISOLATION ULTRAFAST RECOVERY RECTIFIERS VOLTAGE FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound. • Exceeds environmental standards of MIL-S-19500/228 • Low forwrd voltge, high current capability • High surge capacity. • Ultra fast recovery times, high voltage. .161(4.1)MAX .606(15.4) .583(14.8) .112(2.85) .100(2.55) .272(6.9) .248(6.3) .406(10.3) .381(9.7) .134(3.4) .118(3.0) .189(4.8) .165(4.2) .130(3.3) .114(2.9) 50 to 800 Volts CURRENT 16 Amperes ITO-220AB Unit : inch (mm) • Low power loss, high efficiency. MECHANCAL DATA Case: ITO-220AB full molded plastic package Terminals: Lead solderable per MIL-STD-202, Method 208 Polarity: As marked. Standard packaging: Any Weight: 0.08 ounces, 2.24grams. .055(1.4) .039(1.0) .035(0.9) .011(0.3) .1 (2.55) .1 (2.55) .543(13.8) .512(13.0) .071(1.8) .055(1.4) .114(2.9) .098(2.5) .032(.8) MAX AC Positive CT AC MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% PARAMETER Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Current .375"(9.5mm) lead length at Tc = 100OC Peak Forward Surge Current :8.3ms single half sine-wave superimposed on rated load(JEDEC method) Maximum Forward Voltage at 8.0A Maximum DC Reverse Current TA=25OC at Rated DC Blocking Voltage TA=125OC Typical Junction Capacitance (Note 1) Maximum Reverse Recovery Time (Note 2) Typical Thermal Resistance (Note 3) Operating Junction and Storage Temperature Range SYMBOL UF1600FCT UF1601FCT UF1602FCT UF1603FCT UF1604FCT UF1606FCT UF1608FCT VRRM VRMS VDC IAV IFSM VF 1.0 10 500 170 50 2 -65 TO +150 130 100 O UNITS V V V A A 50 35 50 100 70 100 200 140 200 300 210 300 16 125 1.30 400 280 400 600 420 600 800 560 800 1.70 V IR uA CJ TRR RθJC TJ,TSTG pF ns C/W O C NOTES: 1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC. 2. Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=.25A. 3. Thermal resistance from Junction to ambient and from junction to lead 0.375” (9.5mm) P.C.B mounted. STAD-SEP.29.2003 PAGE . 1 RATING AND CHARACTERISTIC CURVES AVERAGE FORWARD CURRENT, AMPERES 24.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD .375" LEAD LENGTHS 300 T J =25 C O 20.0 JUNCTION CAPACITANCE, pF 250 200 50-400V 16.0 12.0 150 100 50 0 1 600-800V 8.0 4.0 0 25 50 75 100 125 O 2 4 10 20 40 100 150 175 CASE TEMPERATURE, C Fig.1 FORWARD CURRENT DERATING CURVE REVERSE VOLTAGE, VOLTS Fig.2 TYPICAL JUNCTION CAPACITANCES INSTANTANEOUS FORWARD CURRENT, Amperes 100 50-200V 300-400V 1000 INSTANTANEOUS REVERSE CURRENT,uA 100 T = 125 O C J 10 10 600-800V 1 1.0 T = 25 O C J .01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0.1 20 40 60 80 100 120 140 FORWARD VOLTAGE, volts PERCENT OF RATED PEAK REVERSE VOLTAGE,% Fig.3 FORWARD CHARACTERISTICS Fig.4 TYPICAL REVERSE CHARACTERISTICS 175 FORWARD SURGE CURRENT,AMPERES 150 T J =25 C 8.3ms Single Half Since-Wave JEDEC Method O 125 100 75 50 25 1 1 5 10 50 100 200 1000 NO. OF CYCLES AT 60Hz Fig.5 PEAK FORWARD SURGE CURRENT STAD-SEP.29.2003 PAGE . 2