UF2010GP_AY_00001

PUF2010GP ULTRAFAST PLASTIC RECTIFIER Voltage 1000 V Current 2A DO-15 Features  Glass passivated chip junction  Ultrafast reverse recovery time  Low forward voltage drop  Low switching losses, high efficiency  High forward surge capability  Lead free in compliance with EU RoHS 2.0  Green molding compound as per IEC 61249 standard Mechanical Data  Case: DO-15 Package  Terminals: Solderable per MIL-STD-750, Method 2026  Approx. Weight: 0.014 ounces, 0.4 grams o Maximum Ratings and Thermal Characteristics (TA = 25 C unless otherwise noted) PARAMETER SYMBOL LIMIT UNITS Maximum Repetitive Peak Reverse Voltage VRRM 1000 V Maximum Rms Voltage VRMS 700 V Maximum Dc Blocking Voltage VDC 1000 V Maximum Average Forward Current Peak Forward Surge Current: 8.3 ms Single Half SineWave Superimposed On Rated Load IF(AV) 2 A IFSM 60 A CJ 16 pF Typical Junction Capacitance Measured at 1 MHZ And Applied VR = 4 V Typical Thermal Resistance Operating Junction Temperature Range Storage Temperature Range September 17,2018-REV.00 RθJA (1) RθJL (2) 90 32 o C/W TJ -55~150 o TSTG -55~150 o C C Page 1 PUF2010GP o Electrical Characteristics (TA = 25 C unless otherwise noted) PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. - 1.21 - IF = 2 A, TJ = 25 C - - 1.7 o - 0.92 - o - 1.07 - o - - 10 o - 15 - - - 75 o IF = 1 A, TJ = 25 C o Forward Voltage VF IF = 1 A, TJ = 125 C IF = 2 A, TJ = 125 C Reverse Current Reverse Recovery Time IR TRR VR = 1000 V, TJ = 25 C VR = 1000 V,TJ= 125 C IF = 0.5 A, IR = 1 A, o UNITS V uA ns IRR = 0.25 A, TJ = 25 C NOTES: 1. The testing condition of the thermal resistance (junction to ambient) is based on 10mm lead length between mini copper pads. 2. The testing condition of the thermal resistance (junction to lead) is based on 10mm lead length between two 10cm x 10cm copper pads. September 17,2018-REV.00 Page 2 PUF2010GP TYPICAL CHARACTERISTIC CURVES CJ, Junction Capacitance (pF) IF, Forward Current (A) 2.4 2 1.6 1.2 0.8 0.4 0 0 25 50 75 100 125 100 10 1 0 150 12 24 36 48 60 VR, Reverse Bias Voltage (V) TL, Lead Temperature (°C) Fig.1 Forward Current Derating Curve Fig.2 Typical Junction Capacitance 10 100 10 TJ = 100°C 1 TJ = 125°C 0.1 TJ = 25°C IF, Forward Current (A) IR, Reverse Current (uA) TJ = 150°C TJ = 150°C 1 TJ = 125°C TJ = 100°C 0.1 TJ = 25°C 0.01 0.01 10 20 30 40 50 60 70 80 90 100 Percent of Rated Reverse Voltage (%) Fig.3 Typical Reverse Characteristics September 17,2018-REV.00 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 VF, Forward Voltage (V) Fig.4 Typical Forward Characteristics Page 3 PUF2010GP Part No Packing Code Version Part No Packing Code Package Type Packing Type Marking Version UF2010GP_AY_00001 DO-15 3K pcs / Ammo UF2010GP Halogen free Packaging Information & Mounting Pad Layout Unit: inch(mm) 0.034(0.86) 0.028(0.71) 1.0(25.4)MIN. 0.300(7.6) 0.230(5.8) 1.0(25.4)MIN. DO-15 Dimension September 17,2018-REV.00 0.140(3.6) 0.104(2.6) Page 4 PUF2010GP Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. September 17,2018-REV.00 Page 5