UF206G_R2_00001

UF200G ~ UF2010G GLASS PASSIVATED JUNCTION ULTRAFAST RECOVERY RECTIFIERS VOLTAGE 50 to 1000 Volt 2 Ampere CURRENT FEATURES 0.034(0.86) 0.028(0.71) 1.0(25.4)MIN. • Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound • Ultra fast recovery for high efficiency. 0.300(7.6) 0.230(5.8) • Lead free in compliance with EU RoHS 2011/65/EU directive MECHANICAL DATA • Case: Molded plastic, DO-15 • Terminals: Axial leads, solderable per MIL-STD-750,Method 2026 0.140(3.6) 0.104(2.6) 1.0(25.4)MIN. • Polarity: Color band denotes cathode end • Weight: 0.014 ounce, 0.397 gram 1 2 Cathode Anode MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. PARAM ETER SY M BO L UF200G UF201G UF202G UF204G UF 206G UF208G UF 2010G UNI T S M aximum Recur r ent Peak Rever se Volt age V RRM 50 100 200 400 600 800 1000 V M aximum RM S Volt age V RM S 35 70 140 280 420 560 700 V M aximum DC Bloc king Volt age V DC 50 100 200 400 600 800 1000 V M aximum Aver age For w ar d Cur r ent 0. 375"( 9. 5mm) lead lengt h at T A = 55 O C I F ( AV) 2 A Peak For w ar d Sur ge Cur r ent : 8. 3ms s ingle half sine- w ave s uper imposed on r at ed load I FS M 60 A M aximum For w ar d Volt age at 2A VF M aximum DC Rever s e Cur r ent at Rat ed DC Bloc king Volt age T J = 25 O C T J = 125 O C Ty pic al J unct ion Capacit ance ( Not e 1) Ty pic al T her mal Resist ance ( Not e 2) M aximum Rever se Rec over y Time ( Not e 3) O per at ing J unct ion and St or age Temper at ur e Range 1 1. 3 1. 7 V IR 1 200 μA CJ 35 pF R θJ A 45 t rr T J , T ST G 50 O 100 - 55 t o + 150 C / W ns O C NOTES: 1. Measured at 1 MHz and applied reverse voltage of 4 VDC. 2. Thermal Resistance from Junction to Ambient and from Junction to lead length 0.375”(9.5mm) P.C.B. mounted. 3. Reverse Recovery Time IF=0.5A ,IR=1A , Irr=0.25A May 20,2015-REV.06 PAGE . 1 UF200G ~ UF2010G RATING AND CHARACTERISTIC CURVES 10 400V 1.0 600V 0.1 O T A =25 C 0.01 0.7 0.9 1.1 1.3 1.7 1.5 1.9 6.0 AVERAGE FORWARD CURRENT, AMPERES FORWARD CURRENT, AMPERES 50-200V 5.0 4.0 3.0 2.0 1.0 0 FORWARD VOLTAGE,VOLTS 25 50 75 100 125 150 175 O AMBIENT TEMPERATURE, C Fig.2 FORWARD CURRENT DERATING CURVE Fig.1 FORWARD CHARACTERISTICS 1000 70 FORWARD SURGE CURRENT,AMPERES INSTANTANEOUS REVERSE CURRENT ,uA SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD .375" LEAD LENGTHS O 100 TJ = 150 C TJ = 100 OC 10 1.0 0.1 O TJ = 25 C 50 40 30 20 10 0 20 40 60 80 100 120 140 PERCENTAGE OF PEAK REVERSE VOLTAGE,% Fig.3 TYPICAL REVERSE CHARACTERISTIC May 20,2015-REV.06 60 1 5 10 50 100 200 1000 NO. OF CYCLES AT 60Hz Fig.4 PEAK FORWARD SURGE CURRENT PAGE . 2 UF200G ~ UF2010G Part No_packing code_Version UF200G_AY_00001 UF200G_AY_10001 UF200G_B0_00001 UF200G_B0_10001 UF200G_R2_00001 UF200G_R2_10001 For example : RB500V-40_R2_00001 Serial number Part No. Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING May 20,2015-REV.06 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 3 UF200G ~ UF2010G Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. May 20,2015-REV.06 PAGE . 4