UF504IG_AY_00001

PUF5GI / UF504IG ULTRAFAST RECOVERY RECTIFIERS Voltage 400 V Current 5A Features UF504IG DO-201AD  Silicon epitaxial high-speed diodes  Soft recovery characteristics  Low forward voltage, high current capability  Hermetically sealed.  Low leakage  High surge capacity  Lead free in compliance with EU RoHS 2.0  Green molding compound as per IEC 61249 standard (SMC) Mechanical Data UF5GI SMC  Case: Molded plastic, SMC, DO-201AD  Terminals: Solder plated, solderable per MIL-STD-750, Method 2026  Polarity: Color Band denotes cathode end  SMC Approx. Weight: 0.0082 ounces, 0.2325 grams  DO-201AD Approx. Weight: 0.04 ounces, 1.142 grams  Marking: Part number 1 Cathode 2 Anode o Maximum Ratings (TA=25 C unless otherwise noted) PARAMETER SYMBOL LIMIT UNIT Maximum repetitive peak reverse voltage VRRM 400 V Maximum rms voltage VRMS 280 V VR 400 V IF(AV) 5 A IFSM 80 A Maximum forward voltage at 5A VF 1.25 V Maximum dc reverse current at rated dc blocking voltage IR 1 A ns Maximum dc blocking voltage Maximum average forward current Peak forward surge current : 8.3ms single half sinewave superimposed on rated load Maximum reverse recovery time (Note 4) TRR 50 Typical thermal resistance SMC(Note 3) RθJA 125 SMC(Note 1) RθJC 14 DO-201AD(Note 2) RθJL 24 TJ, TSTG -55 to +150 Operating and storage temperature range o C/W o C 2 Note : 1. Mounted on a FR4 PCB, single-sided copper, with 100cm copper pad area 2. The testing condition of the thermal resistance (junction to lead) is based on 10 mm lead length between two 10cm x 10cm × 0. 5mm copper pad 3. Mounted on a FR4 PCB, single-sided copper, mini pad. 4. Reverse Recovery Test Conditions : IF=0.5A, IR=1A, Recover to 0.25A May 7,2018-REV.01 Page 1 IF, Forward Current (A) 6 5 4 3 DO-201AD 2 SMC 1 0 0 25 50 75 100 125 150 175 TC, Case Temperature (°C) 100 10 1 1 10 100 VR, Reverse Bias Voltage (V) Fig.2 Typical Junction Capacitance 10 10 1 TJ = 125°C TJ = 150°C 0.1 TJ = 75°C 0.01 TJ = 25°C IF, Forward Current (A) IR, Reverse Current (mA) Fig.1 Forward Current Derating Curve CJ, Junction Capacitance (pF) PUF5GI / UF504IG TJ = 150°C 1 TJ = 125°C TJ = 75°C 0.1 TJ = 25°C 0.001 10 20 30 40 50 60 70 80 90 100 0.01 0.2 Percent of Rated Peak Reverse Voltage (%) Fig.3 Typical Reverse Characteristics May 7,2018-REV.01 0.4 0.6 0.8 1 1.2 VF, Forward Voltage (V) Fig.4 Typical Forward Characteristics Page 2 0.052(1.3) 0.048(1.2) 1.0(25.4)MIN. 0.375(9.5) 0.285(7.2) 1.0(25.4)MIN. PUF5GI / UF504IG May 7,2018-REV.01 0.210(5.3) 0.188(4.8) Page 3 PUF5GI / UF504IG MOUNTING PAD LAYOUT ORDER INFORMATION ˙Packing information T/R – 3K per 13" plastic Reel T/R – 0.8K per 7" plastic Reel May 7,2018-REV.01 Page 4 PUF5GI / UF504IG Part No_packing code_Version UF504IG_AY_00001 UF504IG_AY_10001 UF504IG_B0_00001 UF504IG_B0_10001 UF504IG_R2_00001 UF504IG_R2_10001 UF5GI_R1_00001 UF5GI_R2_00001 For example : RB500V-40_R2_00001 ˙Serial number ˙ ˙Version code means HF Part No. ˙Packing size code means 13" ˙Packing type means T/R Packing Code XX Version Code XXXXX Packing type 1st Code Packing size code 2nd Code HF or RoHS 1st Code 2nd~5th Code Tape and Ammunition Box (T/B) A N/A 0 HF 0 serial number Tape and Reel (T/R) R 7" 1 RoHS 1 serial number Bulk Packing (B/P) B 13" 2 Tube Packing (T/P) T 26mm X Tape and Reel (Right Oriented) (TRR) S 52mm Y Tape and Reel (Left Oriented) (TRL) L PANASERT T/B CATHODE UP (PBCU) U FORMING F PANASERT T/B CATHODE DOWN (PBCD) D May 7,2018-REV.01 Page 5 PUF5GI / UF504IG Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. May 7,2018-REV.01 Page 6