US1002FL_R1_00001

US1001FL~US1008FL SMALL SURFACE MOUNT FAST DIODES VOLTAGE 100 to 800 Volt SOD-123FL 1 Ampere CURRENT Unit：inch(mm) For surface mounted applications in order to optimize board space Ideal for automated placement Glass Passivated Chip Junction High temperature soldering : 260oC / 10 seconds at terminals Lead free in compliance with EU RoHS 2.0 Green molding compound as per IEC 61249 standard MECHANICAL DATA 0.115(2.90) 0.106(2.70) 0.145(3.70) 0.137(3.50) • Case: SOD-123FL, Plastic • Terminals: Solderable per MIL-STD-750, Method 2026 0.044(1.10) 0.031(0.80) • • • • • • 0.075(1.90) 0.067(1.70) FEATURES 0.044(1.10) 0.035(0.90) 0.008(0.20) 0.004(0.10) 0.030(0.75) 0.017(0.45) • Approx. Weight: 0.0006 ounces, 0.0173 grams • Polarity: Color band denotes cathode end 1 2 Cathode Anode MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% Rating Test condition Marking code Symbol US1001FL US1002FL US1004FL US1006FL US1008FL Units - U1B U1D U1G U1J U1K - Maximum repetitve peak reverse voltage VRRM 100 200 400 600 800 V Maximum RMS voltage VRMS 70 140 280 420 560 V VR 100 200 400 600 800 V Maximum DC blocking voltage Maximum average forward rectified current TA=25OC I F(AV) 1 A Peak forward surge current 8.3ms single half sine-wave TL=25OC I FSM 30 A 1A VF Maximum DC reverse current at rated DC blocking voltage TJ=25OC IR Reverse recovery time I F=0.5A I R=1A I rr=0.25A trr Typical capacitance 4V,1MHz CJ 9 Typical thermal resistance (Note 1) R θJA 200 TJ ,TSTG -55 to +150 Maximum instantaneous forward voltage Operating junction and storage temperature range 1 1.4 1.7 V μA 1 50 100 nS pF O C/W O C NOTE : 1.Mounted on an FR4 PCB, single-sided copper, mini pad. June 14,2017­REV.03 PAGE . 1 IF, FORWARD CURRENT (A) US1001FL~US1008FL 1.2 1 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 150 TC, CASE TEMPERATURE (°C) June 14,2017­REV.03 PAGE . 2 US1001FL~US1008FL MOUNTING PAD LAYOUT SOD-123FL Unit：inch(mm) 0.167 (4.25) 0.048 (1.22) 0.122 (3.10) 0.045 (1.15) ORDER INFORMATION • Packing information T/R - 10K per 13" plastic Reel T/R - 3K per 7" plastic Reel June 14,2017­REV.03 PAGE . 3 US1001FL~US1008FL Part No_packing code_Version US1001FL_R1_00001 US1001FL_R2_00001 For example : RB500V-40_R2_00001 Serial number Version code means HF Packing size code means 13" Part No. Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING June 14,2017­REV.03 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 4 US1001FL~US1008FL Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. June 14,2017­REV.03 PAGE . 5