US1MWG_R1_00001

US1AWG SERIES SURFACE MOUNT ULTRAFAST RECTIFIER VOLTAGE 50 to 1000 Volt 1 Ampere CURRENT 0.114(2.90) 0.098(2.50) FEATURES For surface mounted applications in order to optimize board space Easy pick and place Ultrafast recovery times for high efficiency Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated junction • Lead free in compliance with EU RoHS 2.0 • Green molding compound as per IEC 61249 standard 0.062(1.60) 0.047(1.20) • • • • 1 0.5 0.208(5.28) 0.157(4.00) 0.043(1.10) 0.006(0.15) 0.060(1.52) 0.030(0.76) 0.008(0.20) 0.047(1.2) Case : SMA(W) molded plastic Terminals : Solder plated, solderable per MIL-STD-750,Method 2026 Polarity : Color band denotes cathode end Standard packaging : 12mm tape (EIA-481) Weight : 0.0023 ounce, 0.0679 gram Cathode 0.009(0.22) 0.007(0.18) 0.096(2.44) 0.078(2.00) 0.5 MECHANICAL DATA • • • • • 0.181(4.60) 0.157(4.00) 2 Anode MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. PA RA ME TE R S YMB OL US 1 AWG US 1 B W G US 1 D W G US 1 GWG US 1 J WG US 1 K WG US 1 MWG UNITS Maxi mum Re c urre nt P e a k Re ve rs e Vo lta g e V RRM 50 100 200 400 600 800 1000 V Maxi mum RMS Vo lta g e V RMS 35 70 140 280 420 560 700 V Maxi mum D C B lo c k i ng Vo lta g e V DC 50 100 200 400 600 800 1000 V Maxi mum A ve ra g e F o rwa rd C urre nt IF (AV ) 1 A P e a k F o rwa rd S urg e C urre nt : 8 . 3 ms s i ng le ha lf s i ne -wa ve s up e ri mp o s e d o n r a te d lo a d I FS M 30 A Maxi mum F o rwa rd Vo lta ge a t 1 A VF Maxi mum D C Re vers e C urre nt a t Ra te d D C B lo ck i ng Vo lta g e IR 10 A Typ i c a l J unc ti o n C a p ac i ta nc e CJ 17 pF 15 0 35 Typ i c a l The rma l Re si sta nce (No te 1 ) (No te 2 ) R J A R J L Maxi mum Re ve rs e Re c o ve ry Ti me (No te 3 ) T RR Op e ra ti ng J uncti o n a nd S to ra g e Te mp e ra ture Ra ng e 1 T J ,T S TG 1.3 50 1 .7 O 100 -5 5 to +1 5 0 V C / W ns O C NOTES:1. Mounted on an FR4 PCB, single-sided copper, mini pad. 2. Mounted on an FR4 PCB, single-sided copper, with 76.2 x 114.3mm copper pad area. 3. Reverse Recovery Test Conditions: I F =0.5A, I R =1A, Recover to 0.25A. October 30,2019-REV.03 PAGE . 1 1.2 1 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 150 TC, Case Temperature (°C) CJ, Junction Capacitance (pF) IF, Forward Current (A) US1AWG SERIES 10 1 TJ = 125°C 0.1 TJ = 75°C 0.01 TJ = 25°C 0.001 40 80 120 160 10 TJ=75°C TJ=125°C 1 0.1 400 1 1 US1JWG~US1MWG 600 800 TJ=75°C 0.01 TJ=25°C US1GWG 40 60 80 100 Fig.4 Typical Reverse Characteristics US1AWG~US1DWG 10 TJ = 150°C 1 TJ = 125°C TJ = 25°C 0.1 TJ = 75°C 0.01 0.2 0.4 0.6 0.8 1 1.2 VF, Forward Voltage (V) Fig.6 Typical Forward Characteristics 100 US1GWG IF, Forward Current (A) IF, Forward Current (A) TJ=150°C TJ=125°C 20 1000 Fig.5 Typical Reverse Characteristics 10 TJ = 150°C 1 100 0.1 VR, Peak Reverse Voltage (V) 100 10 VR, Reverse Bias Voltage (V) 100 TJ=150°C 0.01 200 US1JWG~US1MWG 1 Percent of Rated Peak Reverse Voltage (%) IF, Forward Current (A) IR, Reverse Current (uA) Fig.3 Typical Reverse Characteristics TJ=25°C 10 0.001 200 VR, Peak Reverse Voltage (V) 100 US1AWG~US1DWG 10 TJ = 150°C US1AWG~US1DWG US1GWG Fig.2 Typical Junction Capacitance IR, Reverse Current (uA) IR, Reverse Current (uA) Fig.1 Forward Current Derating Curve 100 TJ = 125°C TJ = 25°C 0.1 TJ = 75°C 0.01 US1JWG~US1MWG 10 TJ = 150°C 1 TJ = 125°C TJ = 25°C 0.1 TJ = 75°C 0.01 0.2 0.4 0.6 0.8 1 1.2 1.4 VF, Forward Voltage (V) Fig.7 Typical Forward Characteristics October 30,2019-REV.03 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 VF, Forward Voltage (V) Fig.8 Typical Forward Characteristics PAGE . 2 US1AWG SERIES MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 7.5K per 13" plastic Reel T/R - 1.8K per 7" plastic Reel October 30,2019-REV.03 PAGE . 3 US1AWG SERIES Part No_packing code_Version US1AWG_R1_00001 US1AWG_R2_00001 For example : RB500V-40_R2_00001 Serial number Part No. Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING October 30,2019-REV.03 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 4 US1AWG SERIES Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. October 30,2019-REV.03 PAGE . 5