W08G

DATA SHEET W005G~W10G 1.5 AMPERE SILICON MINIATURE SINGLE- PHASE BRIDGES VOLTAGE - 50 to 1000 Volts CURRENT - 1.5 Amperes AM FEATURES • Ratings to 1000V PRV • Surge overload rating: 30/50 Amperes peak • Ideal for printed circuit board • Reliable construction utilizing molded plastic • Mounting position:Any 1.2(30.5) MIN 1.0(25.4) MIN .217(5.5) .197(5.0) .370(9.4) .358(9.1) Unit: inch ( mm ) MECHANICAL DATA Case:Reliable low cost construction utilizing molded plastic technique results in inexpensive product. Terminals: Leads solderable per MIL-STD-202, Method 208 Polarity :Polarity symbols marking on body. Weight: 0.05 ounce, 1.3 grams Available with 0.50 inch leads(P/N add suffix ”S”) For Capacitive load derate current by 20%. Bottom View .220( 5.6 .181( ) 4.6) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25°C ambient temperature unless otherwise specified. Resistive or inductive load, Single phase, half wave, 60Hz. For Capacitive load derate current by 20%. .220( 5.6 .181( ) 4.6) .031(0.8) .028(0.7) W005G Maximum Recurrent Peak Reverse Voltage Maximum RMS Bridge input Voltage Maximum DC Blocking Voltage Maximum Average Forward Current TA=50°C Peak Forward Surge Current, 8.3ms singlehalf sine-wave superimposed on rated load I2t Rating for fusing ( t < 8.35 ms) Maximum Forward Voltage Drop per Bridge Element at 1.0A Maximum Reverse Current at Rated TJ= 25°C DC Blocking Voltage per element TJ=100°C Typical Junction capacitance per leg (Note 1) CJ Typical Thermal resistance per leg (Note 2) RθJA Typical Thermal resistance per leg (Note 2) RθJA Operating Temperature Range TJ Storage Temperature Range TA NOTES: W01G 100 W02G 200 W04G 400 W06G 600 W08G 800 W10G 1000 UNITS V V V A A A2 S V µA mA 50 35 50 70 100 140 200 280 400 1.5 50.0 10.0 1.0 10.0 1.0 24.0 36.0 13.0 -55 to +125 -55 to +150 420 600 560 800 700 1000 pF °C/W °C °C 1. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts. 2. Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with 0.47 X 0.47"(12 X 12mm) copper pads. DATE : 02/09/06 PAGE . 1 INSTANTANEOUS FORWARD CURRENT, AMPERES 5.0 4.0 3.0 2.0 1.0 .9 .8 .7 .5 .3 .2 .1 .07 .05 .03 .02 .01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 RATING AND CHARACTERISTIC CURVES OUTPUT CURRENTAMPERES 3.0 2.5 2.0 1.5 1.0 0.5 0 MOUNTED ON PC BOARD. TA 0.5"(12.7mm) LEAD LENGTH 60Hz RESISTIVE OR INDUCTIVE LOAD 0 50 100 150 AMBIENT TEMPERATURE OC Fig. 1- DERATING CURVE FOR OUTPUT RECTIFIED CURRENT INSTANTANEOUS FORWARD VOLTAGE, VOLTS Fig. 2- TYPICAL INSTANTANEOUS FORWARD CHARACTERISITCS (25 C) O INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 10 T C =100 C 1.0 O 0.1 T A =25 OC 0.01 0 20 40 60 80 100 120 140 PERCENT OF PEAK REVERSE VOLTAGE Fig. 3- TYPICAL REAK REVERSE CHARACTERISTICS FPRWARD SURGE CURRENT, AMPERES pk (HALF SINE-WAVE) 50 40 30 20 10 0 1 2 6 10 20 40 60 100 NO. OF CYCLES AT 60Hz Fig. 4- MAXIMUM NON-REPETITEVE PEAK FORWARD SURGE CURRENT DATE : 02/09/06 PAGE . 2