ECT10

Miniature 10Base-T Interface Module with Enhanced CMA ELECTRONICS INC. ECT10 & ECT10-RC • Enhanced Common Mode Attenuation • Complies with or exceed IEEE802.3, 10Base-T Requirements • Robust design allows to withstand SMD soldering profiles • Add “-RC” after part number for RoHS Compliant Electrical Parameters @ 25° C Cut-off Frequency (MHz) ± 1.0 MHz Xmit 17 Rcv 17 Insertion Loss (1) (dB Max.) 1-10 MHz Xmit -1.5 Rcv -1.5 @ 20 MHz Xmit -7 Rcv -6 @ 25 MHz Xmit -19 Rcv -14 Attenuation (dB Min.) @ 30 MHz Xmit -32 Rcv -20 @ 40 MHz Xmit -35 Rcv -31 • (1) Referenced to the Output Level Fundamental Frequency @ 5 MHz • Package .500 (12.70) .075 (1.90) PCA ECT10(-RC) Date Code .050 (1.27) .075 (1.90) 1 100 Ω .250 (6.35) .460 (11.68) Solder Pad Layout 3 LPF Schematic Transmit Channel 16 2 1:1 15 100 Ω 14 Pin 1 I.D. .350 (8.89) Receive Channel .030 (.762) 6 100 Ω LPF 7 1:1 11 10 100 Ω 9 .325 (8.25) .010/.015 (.254/.381) 0°-8° .008/.012 (.203/.305) 8 .016/.022 (.406/.559) .050 (1.27) .060/.065 (1.52/1.65) .420 (10.67) Notes : 1. Lead Finish 2. Peak Temperature Rating 3. Moisture Sensitive Levels 4. Weight (Tube) 5. Packaging Information (*Add “TR” to end of part number, but (Tape & Reel) in front of “-RC”when placing order) ECT10 SnPb 225°C (168 Hours, ≤30°C/60%RH) ECT10-RC Hot Tin Dip (Sn) † 245°C (72 Hours, ≤30°C/60%RH) MSL = 3 MSL = 4 0.84 grams 39 pieces/tube 600 pieces/13” reel (*ECT10TR) 0.84 grams 39 pieces/tube 600 pieces/13” reel (*ECT10TR-RC) † Hot tin dipped over Matte Tin with Ni Barrier Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSECT10 & -RC Rev. C2 6/26/06 JGD TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com