EPJ9302-F2

RJ-45 Filter Port Jacks 10/100Base-TX Voice Over IP ELECTRONICS INC. EPJ9302-F2 • Designed for IP Phone Applications • Surface Mount Package • Space Saving RJ-45 Connectors • UL94V-0 Rated High Temp thermoplastic Housing * Designed to meet 350 mA Balanced DC Line Current Electrical Parameters @ 25° C Turns Ratio ( ± 5% ) OCL (µH Min.) @ 100 KHz, 100m Vrms Xmit/Rcv 1CT:1/1CT:1CT 8 mA DC Bias 350 -1.0 -1.5 -20 -15 -12 -30 -30 • Isolation : 1500Vrms • Cable Side Impedance : 100 Ω • Insertion Loss (dB Max.) 1-80 MHz @ 100 MHz 1-30 MHz Return Loss (dB Min.) @60 MHz @80 MHz CMRR (dB Min.) 100 KHz100 MHz CMD (dB Min.) 100 KHz100 MHz Crosstalk (dB Min.) 100 KHz100 MHz Xmit & Rcv -35 Package .756 (19.20) .646 (16.40) J1 .531 (13.49) .012 (.305) .582 (14.78) .291 (7.39) .949 (24.10) P7 Marking : PCA EPJ9302F2 D.C. .012 (.305) P9 P8 P1 P2 .061 .018 (1.55) (.457) .047 (1.19) .429 (10.90) .122 (3.10) .079 (2.00) .100 (2.54) .635 (16.13) .050 (1.27) P11 Schematic Transmit J1 J2 J4 J5 J = Connector Side P = Pin Side Receive J3 PCB Layout (Component) .705 (17.91) .500 (12.70) .635 (16.13) P12 P10 P6 .080 X .120 2 Plcs [2.03 X 3.05 2 Plcs] .128 [3.25] = Ø 2 plcs P5 J6 J7 J8 .535 (13.59) 123456 .140 (3.56) 7 8 9 101112 .045 X .080 12 Plcs [1.14 X 2.03 12 Plcs] .080 (2.03) .050 (1.27) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSJ9302-F2 Rev. 11/6/02 TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com