EK42440-02

Product Specification PE42440 SP4T UltraCMOS® RF Switch 50 – 3000 MHz Product Description The PE42440 is a HaRP™-enhanced SP4T RF switch developed on the UltraCMOS® process technology. This general-purpose switch contains 4 identical RF ports and can be used in a multitude of applications up to 3000 MHz. It integrates on-board CMOS control logic with a low voltage CMOScompatible control interface and requires no DC blocking capacitors. This RoHS-compliant part is available in a standard 3 x 3 x 0.75 mm QFN package. Peregrine’s HaRP™ technology enhancements deliver high linearity and exceptional harmonics performance. It is an innovative feature of the UltraCMOS® process, providing performance superior to GaAs with the economy and integration of conventional CMOS. Features TM • HaRP - Enhanced Technology for Unparalleled Linearity • Very Low Insertion Loss: 0.45 dB @ 1000 MHz, 0.5 dB @ 2000 MHz • Very High Isolation: 34 dB @ 1000 MHz, 28 dB @ 2000 MHz • Exceptionally High ESD tolerance: • Class 3 (4.0 kV HBM) on RFC pin • Class 2 (2.0 kV HBM) on all pins • Integrated Decoder for 2-pin control • Accepts 1.8V and 2.75V Control Logic Levels • Low 4.5Ω Series ON Resistance • No Blocking Capacitors Required Figure 2. Package Type 16L 3 x 3 x 0.75 mm QFN Figure 1. Functional Diagram RFC ESD RF3 RF1 ESD ESD ESD ESD RF4 RF2 CMOS Control/Driver and ESD CTRL CTRL Vdd Document No. DOC-18014-2 │www.psemi.com 71-0019-01 ©2009-2013 Peregrine Semiconductor Corp. All rights reserved. Page 1 of 8 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com PE42440 Product Specification Table 1. Electrical Specifications: Temp = 25°C, VDD = 2.75V (ZS = ZL = 50Ω ) Parameter Condition Min Operational Frequency Insertion Loss (RFC - RFX) Return Loss (RFC - RFX, Active Ports) Isolation (RFC - RFX) Typ 50 Max Units 3000 MHz 50 - 1000 MHz - 0.45 0.65 dB 1000 - 2000 MHz - 0.5 0.7 dB 2000 - 3000 MHz - 0.85 1.15 dB 50 - 1000 MHz - 22 - dB 1000 - 2000 MHz - 15 - dB 2000 - 3000 MHz - 11 - dB 50 - 1000 MHz 31 34 - dB 1000 - 2000 MHz 25 28 - dB 2000 - 3000 MHz 20 22 - dB Input IP2 50 - 3000 MHz, +18 dBm per tone, 1 MHz spacing 96 dBm Input IP3 50 - 3000 MHz, +18 dBm per tone, 1 MHz spacing 67 dBm P1dB1 50 - 3000 MHz 41.5 dBm Switching time 50% CNTL to 10/90% of RF 2 µs Note: 1. Please refer to Maximum Operating Pin (50Ω) in Table 4 Table 2. Electrical Specifications, Worst Case Conditions: Temp = 85°C, VDD = 2.65V (ZS = ZL = 50Ω ) Parameter Condition Min Operational Frequency Insertion Loss (RFC - RFX) Return Loss (RFC - RFX, Active Ports) Isolation (RFC - RFX) Typ 50 Max Units 3000 MHz 50 - 1000 MHz - 0.5 0.65 dB 1000 - 2000 MHz - 0.65 0.75 dB 2000 - 3000 MHz - 1.0 1.25 dB 50 - 1000 MHz - 21 - dB 1000 - 2000 MHz - 15 - dB 2000 - 3000 MHz - 10 - dB 50 - 1000 MHz 30 32 - dB 1000 - 2000 MHz 24 26 - dB 2000 - 3000 MHz 20 22 - dB Input IP2 50 - 3000 MHz, +18 dBm per tone, 1 MHz spacing 95 dBm Input IP3 50 - 3000 MHz, +18 dBm per tone, 1 MHz spacing 66 dBm P1dB1 50 - 3000 MHz 41 dBm Switching time 50% CNTL to 10/90% of RF 2 µs Note: 1. Please refer to Maximum Operating Pin (50Ω) in Table 4 ©2009-2013 Peregrine Semiconductor Corp. All rights reserved. Document No. DOC-18014-2 │ UltraCMOS® RFIC Solutions Page 2 of 8 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com PE42440 Product Specification Symbol RF1 GND Table 5. Absolute Maximum Ratings VDD 13 14 N/C 15 16 Pin 1 RF2 Figure 3. Pin Configuration (Top View) VI GND 1 VDD 2 V2 3 V1 4 Exposed Ground Paddle 12 GND 11 RFC 10 GND 9 GND PIN (50Ω)1 Parameter/Conditions Min Max Units Power supply voltage -0.3 4.0 V Voltage on any DC input -0.3 VDD+ 0.3 V +28 +33 dBm dBm 4000 V HBM ESD Voltage, all pins 2000 V MM ESD Voltage, RFC pin 300 V MM ESD Voltage, all pins 100 V RF input power (50 - 500 MHz) (500 - 3000 MHz) HBM2 ESD Voltage, RFC pin 8 7 VESD RF3 RF4 GND 6 GND 5 2 Table 3. Pin Descriptions Pin No. Pin Name Notes: 1. VDD within operating range specified in Table 4 2. ESD Voltage (HBM, MIL-STD-883 Method 3015.7) Description 1 GND Ground 2 VDD Supply 3 V2 Switch control input, CMOS logic level 4 V1 Switch control input, CMOS logic level 5 GND Ground 6 RF41 RF Port 4 7 GND Ground 8 RF31 RF Port 3 Path V2 V1 Ground RFC – RF1 0 0 9 GND Exceeding absolute maximum ratings may cause permanent damage. Operation between operating range maximum and absolute maximum for extended periods may reduce reliability. Table 6. Truth Table 10 GND Ground RFC – RF2 1 0 11 RFC1 RF Common RFC – RF3 0 1 12 GND Ground RFC – RF4 1 1 1 13 RF1 14 GND Ground Electrostatic Discharge (ESD) Precautions 15 RF21 RF Port 2 When handling this UltraCMOS® device, observe the same precautions that you would use with other ESDsensitive devices. Although this device contains circuitry to protect it from damage due to ESD, precautions should be taken to avoid exceeding the specified rating. RF Port 1 16 N/C No Connect Paddle GND Exposed ground paddle Notes: 1. All RF pins must be DC blocked with an external series capacitor or held at 0 VDC Table 4. Operating Ranges4 Parameter VDD Supply Voltage IDD Power Supply Current (VDD = 2.75V) RF input power (50Ω) (50 - 500 MHz) (500 - 3000 MHz) Control Voltage High Control Voltage Low Temperature Range Storage Temperature Range Latch-Up Avoidance Symbol Min Typ Max Units VDD 2.65 2.75 IDD 13 3.3 V 50 µA +28 +33 dBm dBm V V °C °C Unlike conventional CMOS devices, UltraCMOS® devices are immune to latch-up. Moisture Sensitivity Level PIN VIH VIL TOP TST 1.4 -40 -65 0.4 +25 +85 +25 +160 Note: 1. Operation should be restricted to the limits in the Operating Ranges table Document No. DOC-18014-2 │www.psemi.com The Moisture Sensitivity Level rating for the PE42440 in the 16-lead 3 x 3 x 0.75 mm QFN package is MSL1. Switching Frequency The PE42440 has a maximum 25 kHz switching rate. ©2009-2013 Peregrine Semiconductor Corp. All rights reserved. Page 3 of 8 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com PE42440 Product Specification Figure 4. Evaluation Board Layouts Evaluation Kit Peregrine Specification 101-0287-03 The SP4T switch EK Board was designed to ease customer evaluation of Peregrine’s PE42440. The RF common port is connected through a 50Ω transmission line via the top SMA connector, J1. RF1, RF2, RF3 and RF4 are connected through 50Ω transmission lines via SMA connectors J3, J5, J2 and J4, respectively. A through 50Ω transmission is available via SMA connectors J6 and J7. This transmission line can be used to estimate the loss of the PCB over the environmental conditions being evaluated. The board is constructed of a four metal layer FR4 material with a total thickness of 62 mils. The middle layers provide ground for the transmission lines. The transmission lines were designed using a coplanar waveguide with ground plane model using a trace width of 32 mils, trace gaps of 25 mils, and metal thickness of 2.1 mils. Figure 5. Evaluation Board Schematic Peregrine Specification 102-0339-02 9 RF3 14 GND GND 7 15 RF2 RF4 6 GND 5 RF4 1 J4 SMASM 2 V1 V2 1 4 3 1 VDD GND GND 16 U1 QFN50P3X3-16P RF3 2 GND GND 10 11 ANT RF1 8 2 RF2 J2 SMASM 13 2 J5 SMASM 1 GND RF1 2 J3 SMASM 1 12 ANT 1 J1 SMASM 2 J8 HEADER14 13 11 9 7 5 3 1 13 11 9 7 VDD 5 3 V2 1 V1 C4 DNI R2 1M R1 1M C3 DNI Unlabeled Test Line ©2009-2013 Peregrine Semiconductor Corp. All rights reserved. C2 DNI C1 DNI J6 SMASM 1 J7 SMASM Through Line 1 2 14 12 10 8 6 4 2 2 14 12 10 8 6 4 2 Document No. DOC-18014-2 │ UltraCMOS® RFIC Solutions Page 4 of 8 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com PE42440 Product Specification Typical Performance Data Figure 6. Insertion Loss: RFC-RF @ 25°C Figure 7. Insertion Loss: RFC-RF @ 2.75V Figure 8. Isolation: RFC-RF @ 25°C Figure 9. Isolation: RFC-RF @ 2.75V Document No. DOC-18014-2 │www.psemi.com ©2009-2013 Peregrine Semiconductor Corp. All rights reserved. Page 5 of 8 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com PE42440 Product Specification Figure 10. Return Loss at Active Port @ 25 °C Figure 11. Return Loss at Active Port @ 2.75 V Figure 12. Maximum Operating Power vs. Frequency 30.00 VDD=2.65V VDD=2.75V VDD=2.95V VDD=3.15V VDD=3.2V 25.00 Input Power (dBm) 20.00 15.00 10.00 5.00 0.00 -5.00 -10.00 -15.00 1 10 100 1000 10000 100000 Frequency (kHz) ©2009-2013 Peregrine Semiconductor Corp. All rights reserved. Document No. DOC-18014-2 │ UltraCMOS® RFIC Solutions Page 6 of 8 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com PE42440 Product Specification Figure 13. Package Drawing 16-lead 3 x 3 x 0.75 mm QFN 0.10 C 3.00 A (2X) 0.28 (X16) 1.70±0.05 B 9 0.50 (X12) 12 0.575 (X16) 13 8 1.70±0.05 3.00 4 0.10 C 1.75 3.40 16 5 0.23±0.05 (X16) 0.50 1 (2X) 1.50 0.375±0.05 (X16) 1.75 Pin #1 Corner 3.40 TOP VIEW BOTTOM VIEW RECOMMENDED LAND PATTERN 181-0024 0.10 C 0.10 0.05 0.80 MAX 0.05 C C A B C ALL FEATURES SEATING PLANE 0.203 0.05 C SIDE VIEW Figure 14. Marking Specifications 42440 YYWW ZZZZZ YYWW = Date Code ZZZZZ = Last five digits of Lot Number 17-0009 Document No. DOC-18014-2 │www.psemi.com ©2009-2013 Peregrine Semiconductor Corp. All rights reserved. Page 7 of 8 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com PE42440 Product Specification Figure 15. Tape and Reel Specifications 16-lead 3x3x0.75 mm QFN Ao = 3.30 ± 0.1 mm Bo = 3.30 ± 0.1 mm Ko = 1.10 ± 0.1 mm Tape Feed Direction Table 7. Ordering Information Description Package Shipping Method PE42440G-16QFN 3 x 3 mm-3000C Green 16-lead 3 x 3 mm QFN 3000 units / T&R PE42440-16QFN 3 x 3 mm-EK Evaluation Kit 1 / Box Order Code PE42440MLBB-Z EK42440-02 Sales Contact and Information For Sales and contact information please visit www.psemi.com. Advance Information: The product is in a formative or design stage. The datasheet contains design target specifications for product development. Specifications and features may change in any manner without notice. Preliminary Specification: The datasheet contains preliminary data. Additional data may be added at a later date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best possible product. Product Specification: The datasheet contains final data. In the event Peregrine decides to change the specifications, Peregrine will notify customers of the intended changes by issuing a CNF (Customer Notification Form). The information in this datasheet is believed to be reliable. However, Peregrine assumes no liability for the use of this information. Use shall be entirely at the user’s own risk. ©2009-2013 Peregrine Semiconductor Corp. All rights reserved. No patent rights or licenses to any circuits described in this datasheet are implied or granted to any third party. Peregrine’s products are not designed or intended for use in devices or systems intended for surgical implant, or in other applications intended to support or sustain life, or in any application in which the failure of the Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no liability for damages, including consequential or incidental damages, arising out of the use of its products in such applications. The Peregrine name, logo, UltraCMOS and UTSi are registered trademarks and HaRP, MultiSwitch and DuNE are trademarks of Peregrine Semiconductor Corp. All other trademarks mentioned herein are the property of their respective companies. Document No. DOC-18014-2 │ UltraCMOS® RFIC Solutions Page 8 of 8 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com