EK42721-02

Product Specification PE42721 UltraCMOS® SPDT RF Switch 5–2200 MHz Product Description The PE42721 is a HaRP™ technology-enhanced absorptive 75Ω SPDT RF switch developed on the UltraCMOS® process technology. PE42721 is a highly linear device delivering high isolation and very low insertion loss performance. It is designed for broadband applications such as TV tuner modules, CATV signal switching and distribution, DTV, multi-tuner digital video recorders (DVRs) and set-top boxes. PE42721 supports +1.8V control logic and offers high ESD protection. PE42721 is pin compatible to PE42750. In addition, no blocking capacitors are required if DC voltage is not present on the RF ports. Peregrine’s HaRP™ technology enhancement is an innovative feature of the UltraCMOS® process, offering the performance of GaAs with the economy and integration of conventional CMOS. Features  HaRP™ technology enhanced  High linearity CTB of -99 dBc  CSO better than -105 dBc Supports +1.8V control logic Low insertion loss  0.40 dB @ 220 MHz  0.50 dB @ 870 MHz  0.65 dB @ 2200 MHz High isolation  85 dB @ 220 MHz  68 dB @ 870 MHz  53 dB @ 2200 MHz ESD performance  3kV HBM on RF pins to GND  2kV HBM on all other pins  1kV CDM on all pins      Figure 1. Functional Diagram Figure 2. Package Type 12-lead 3x3 mm QFN ESD RFC RF2 RF1 ESD ESD 75 CMOS Control Driver and ESD CTRL1 CTRL2 Document No. DOC-13814-4 │ www.psemi.com 75 DOC-78344 ©2013-2016 Peregrine Semiconductor Corp. All rights reserved. Page 1 of 12 PE42721 Product Specification Table 1. Electrical Specifications Temp = +25°C, VDD = 3.3V (ZS = ZL = 75Ω) Parameter Path Condition Min Operational frequency Typ 5 Insertion loss RFC–RFX Isolation RFX–RFX Isolation RFC–RFX Max Unit 2200 MHz 5–220 MHz 0.40 0.55 dB 221–870 MHz 0.50 0.70 dB 871–2200 MHz 0.65 0.85 dB 5–220 MHz 81 85 dB 221–870 MHz 65 68 dB 871–2200 MHz 52 53 dB 5–220 MHz 68 70 dB 221–870 MHz 57 59 dB 871–2200 MHz 53 55 dB 870 MHz 18 dB 2200 MHz 15 dB RFC–RFX 45–1000 MHz 27 dBm IIP2 RFX 45–2200 MHz 110 dBm IIP3 RFX Return loss Input 0.1 dB compression All ports 1,2 3 5–2200 MHz 60 dBm CTB 159 channels; 42 dBmV per channel output power -99 dBc CSO 159 channels; 42 dBmV per channel output power < -105 dBc Cross modulation distortion 159 channels; 42 dBmV per channel output power -89.5 dBc Video feedthrough DC measurement 4 mVPP Switching time 50% CTRL to 90% or 10% RF 1 1.5 μs Notes: 1. The input 0.1 dB compression point (P0.1dB) is a linearity figure of merit. Refer to Table 3 for the RF input power PIN 2. P0.1dB = 25 dBm @ 2.2 GHz 3. IIP2 = 83 dBm @ 5 MHz ©2013-2016 Peregrine Semiconductor Corp. All rights reserved. Page 2 of 12 Document No. DOC-13814-4 │ UltraCMOS® RFIC Solutions PE42721 Product Specification 3 CTRL1 CTRL2 11 10 GND 6 GND GND 2 5 RF1 Exposed Ground Pad RFC 1 4 GND VDD Pin 1 Dot Marking 12 Figure 3. Pin Configuration (Top View) Pin Name Symbol Min Typ Max Unit Supply voltage VDD 2.3 3.3 5.5 V Supply current IDD 110 200 µA Digital input high (CTRL1, CTRL2) VIH 1.17 3.6 V VIL -0.3 0.6 V ICTRL 1 µA PIN 18 22 dBm dBm 16 16 dBm dBm +85 °C Parameter 9 GND 8 RF2 Digital input low (CTRL1, CTRL2) 7 GND Digital input current RF input power (RFC–RFX)1 5 ≤ 45 MHz 45 ≤ 2200 MHz Table 2. Pin Descriptions Pin # Table 3. Operating Ranges Description RF input power into terminated ports (RFX)1 5 ≤ 45 MHz PIN,TERM 45 ≤ 2200 MHz 1 GND RF Ground 2 RF11 RF Port 1 3 GND RF Ground 4 GND RF Ground 5 1 RFC RF Common 6 GND RF Ground 7 GND RF Ground 8 RF21 RF Port 2 Digital input voltage 9 GND RF Ground 10 CTRL2 Digital control logic input 2 RF input power (RFC–RFX)1 11 CTRL1 Digital control logic input 1 12 VDD Pad GND Note 1: Supply Voltage Exposed pad: Ground for proper operation RF pins 2, 5, and 8 must be at 0V DC. The RF pins do not require DC blocking capacitors for proper operation if the 0V DC requirement is met Operating temperature range TOP -40 +25 Note 1: 100% duty cycle, all bands, 75Ω Table 4. Absolute Maximum Ratings Parameter/Condition Symbol Min Max Unit VDD -0.3 5.5 V VCTRL -0.3 3.6 V 18 22 dBm dBm 16 16 dBm dBm +150 °C ESD voltage HBM RF pins to GND VESD,HBM All other pins 3000 2000 V V ESD voltage MM3, all pins VESD,MM 100 V VESD,CDM 1000 V Supply voltage 5 ≤ 45 MHz 45 ≤ 2200 MHz PIN RF input power into terminated ports (RFX)1 5 ≤ 45 MHz PIN,TERM 45 ≤ 2200 MHz Storage temperature range TST -65 2 Exceeding absolute maximum ratings may cause permanent damage. Operation should be restricted to the limits in the Operating Ranges table. Operation between operating range maximum and absolute maximum for extended periods may reduce reliability. Document No. DOC-13814-4 │ www.psemi.com 4 ESD Voltage CDM , all pins Notes: 1. 100% duty cycle, all bands, 75Ω 2. Human Body Model (MIL-STD-883 Method 3015) 3. Machine Model (JEDEC JESD22-A115) 4. Charged Device Model (JEDEC JESD22-C101) ©2013-2016 Peregrine Semiconductor Corp. All rights reserved. Page 3 of 12 PE42721 Product Specification Electrostatic Discharge (ESD) Precautions When handling this UltraCMOS® device, observe the same precautions that you would use with other ESD-sensitive devices. Although this device contains circuitry to protect it from damage due to ESD, precautions should be taken to avoid exceeding the specified rating. Latch-Up Avoidance Unlike conventional CMOS devices, UltraCMOS® devices are immune to latch-up. Switching Frequency The PE42721 has a maximum 25 kHz switching rate. Switching frequency describes the time duration between switching events. Switching time is the time duration between the point the control signal reaches 50% of the final value and the point the output signal reaches within 10% or 90% of its target value. Switching time is provided in Table 1. ©2013-2016 Peregrine Semiconductor Corp. All rights reserved. Page 4 of 12 Table 5. Truth Table1 C1 C2 RFC – RF1 RFC – RF2 Low Low ON OFF Low High OFF ON High Low OFF ON High High ON OFF Note 1: A versatile logic table has been established to allow either C1 or C2 to act as a single pin control and in either polarity Spurious Performance The typical spurious performance of the PE42721 is –124 dBm. Moisture Sensitivity Level The Moisture Sensitivity Level rating for the PE42721 in the 12-lead 3x3 mm QFN package is MSL1. Document No. DOC-13814-4 │ UltraCMOS® RFIC Solutions PE42721 Product Specification Typical Performance Data @ 25°C and VDD = 3.3V unless otherwise specified Figure 4. Insertion Loss (RFC-RFX) Figure 5. Insertion Loss vs. Temp (RFC-RFX) Document No. DOC-13814-4 │ www.psemi.com Figure 6. Insertion Loss vs. VDD (RFC-RFX) ©2013-2016 Peregrine Semiconductor Corp. All rights reserved. Page 5 of 12 PE42721 Product Specification Typical Performance Data @ 25°C and VDD = 3.3V unless otherwise specified Figure 7. RFC Port Return Loss vs. Temp (RF1 Active) Figure 8. RFC Port Return Loss vs. VDD (RF1 Active) Figure 9. RFC Port Return Loss vs. Temp (RF2 Active) Figure 10. RFC Port Return Loss vs. VDD (RF2 Active) ©2013-2016 Peregrine Semiconductor Corp. All rights reserved. Page 6 of 12 Document No. DOC-13814-4 │ UltraCMOS® RFIC Solutions PE42721 Product Specification Typical Performance Data @ 25°C and VDD = 3.3V unless otherwise specified Figure 11. Active Port Return Loss vs. Temp (RF1 Active) Figure 12. Active Port Return Loss vs. VDD (RF1 Active) Figure 13. Active Port Return Loss vs. Temp (RF2 Active) Figure 14. Active Port Return Loss vs. VDD (RF2 Active) Document No. DOC-13814-4 │ www.psemi.com ©2013-2016 Peregrine Semiconductor Corp. All rights reserved. Page 7 of 12 PE42721 Product Specification Typical Performance Data @ 25°C and VDD = 3.3V unless otherwise specified Figure 15. Isolation vs. Temp (RFX-RFX) Figure 16. Isolation vs. VDD (RFX-RFX) Figure 17. Isolation vs. Temp (RFC-RFX) Figure 18. Isolation vs. VDD (RFC-RFX) ©2013-2016 Peregrine Semiconductor Corp. All rights reserved. Page 8 of 12 Document No. DOC-13814-4 │ UltraCMOS® RFIC Solutions PE42721 Product Specification Evaluation Board Figure 19. Evaluation Board Layout The SPDT switch evaluation board was designed to ease customer evaluation of Peregrine’s PE42721. The RF common port is connected through a 75Ω transmission line via the F-Type connector, J2. RF1 and RF2 ports are connected through 75Ω transmission lines via F-Type connectors J1 and J3, respectively. A 75Ω through transmission line is available via F-Type connectors J4 and J5, which can be used to de-embed the loss of the PCB. J6 provides DC and digital inputs to the device. PRT-51234 Document No. DOC-13814-4 │ www.psemi.com ©2013-2016 Peregrine Semiconductor Corp. All rights reserved. Page 9 of 12 PE42721 Product Specification Figure 20. Evaluation Board Schematic DOC-02571 ©2013-2016 Peregrine Semiconductor Corp. All rights reserved. Page 10 of 12 Document No. DOC-13814-4 │ UltraCMOS® RFIC Solutions PE42721 Product Specification Figure 21. Package Drawing 12-lead 3x3 mm QFN DOC-53275 Figure 22. Top Marking Specifications 42721 YYWW ZZZZZZ = Pin 1 designator YY = Last two digits of assembly year WW = Assembly work week ZZZZZZ = Assembly lot code (maximum six characters) DOC-64916 Document No. DOC-13814-4 │ www.psemi.com ©2013-2016 Peregrine Semiconductor Corp. All rights reserved. Page 11 of 12 PE42721 Product Specification Figure 23. Tape and Reel Drawing Tape Feed Direction Ao = 3.30 ± 0.1 mm Bo = 3.30 ± 0.1 mm Ko = 1.10 ± 0.1 mm Pin 1 Top of Device Device Orientation in Tape Table 6. Ordering Information Order Code Description Package Shipping Method PE42721MLBA-Z PE42721 SPDT RF switch Green 12-lead 3x3 mm QFN 3000 units/T&R EK42721-02 PE42721 Evaluation kit Evaluation kit 1/Box Sales Contact and Information For sales and contact information please visit www.psemi.com. Advance Information: The product is in a formative or design stage. The datasheet contains design target specifications for product development. Specifications and features may change in any manner without notice. Preliminary Specification: The datasheet contains preliminary data. Additional data may be added at a later date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best possible product. Product Specification: The datasheet contains final data. In the event Peregrine decides to change the specifications, Peregrine will notify customers of the intended changes by issuing a CNF (Customer Notification Form). The information in this datasheet is believed to be reliable. However, Peregrine assumes no liability for the use of this information. Use shall be entirely at the user’s own risk. ©2013-2016 Peregrine Semiconductor Corp. All rights reserved. Page 12 of 12 No patent rights or licenses to any circuits described in this datasheet are implied or granted to any third party. Peregrine’s products are not designed or intended for use in devices or systems intended for surgical implant, or in other applications intended to support or sustain life, or in any application in which the failure of the Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no liability for damages, including consequential or incidental damages, arising out of the use of its products in such applications. The Peregrine name, logo, UltraCMOS and UTSi are registered trademarks and HaRP, MultiSwitch and DuNE are trademarks of Peregrine Semiconductor Corp. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com. Document No. DOC-13814-4 │ UltraCMOS® RFIC Solutions