PE42430MLAB-Z

Product Specification PE42430 Product Description The PE42430 is a HaRP™-enhanced reflective SP3T RF switch developed on the UltraCMOS® process technology. This tiny general purpose switch is ideal for WLAN and bluetooth applications in the 2.4 - 2.5 GHz bands as well as general broadband switching applications. It is comprised of three RF ports and has low insertion loss and high isolation. An on-chip CMOS decode logic facilitates a three-pin CMOS control interface. Unlike competitive solutions, there is no need for blocking capacitors when using the PE42430. Peregrine’s HaRP™ technology enhancements deliver high linearity and exceptional harmonics performance. It is an innovative feature of the UltraCMOS® process, providing performance superior to GaAs with the economy and integration of conventional CMOS. Figure 1. Functional Diagram UltraCMOS® SP3T Reflective RF Switch 100 – 3000 MHz Features  HaRP™-enhanced UltraCMOS® device  Low insertion loss  Typical 0.45 dB @ 1 GHz  Typical 0.55 dB @ 2.5 GHz  IIP3: Typical +66 dBm  P0.1dB Compression: Typical +30 dBm  Excellent ESD tolerance of 4500V HBM and 250V MM on all ports  No external VDD required. VDD is derived from switch control inputs  Package type: 8-lead 1.5 x 1.5 mm DFN Figure 2. Package Type 8-lead 1.5 x 1.5 mm DFN RFC ESD RF1 RF3 ESD ESD RF2 ESD CMOS Control/Driver and ESD V1 V2 V3 71-0086-01 Document No. 70-0326-04 │ www.psemi.com ©2010-2012 Peregrine Semiconductor Corp. All rights reserved. Page 1 of 11 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com PE42430 Product Specification Table 1. Electrical Specifications1: Nominal @ 25°C, V1, V2 or V3 = 3V/5V (ZS = ZL = 50 Ω) Electrical Parameter Path Condition Min Typ 100 Operating Frequency Insertion Loss RFC-RFX Isolation RFX-RFX Isolation RFC-RFX Return Loss (Active Port) RFX Return Loss (Common Port) RFC Max Unit 3000 MHz 100 to 1000 MHz 0.45 0.56 dB 1000 to 3000 MHz 0.65 0.9 dB 2400 to 2500 MHz 0.55 0.8 dB 100 to 1000 MHz 35 40 dB 1000 to 3000 MHz 23 28 dB 2400 to 2500 MHz 25 30 dB 100 to 1000 MHz 34 40 dB 1000 to 3000 MHz 23 28 dB 2400 to 2500 MHz 25 30 dB 100 to 1000 MHz 22 dB 1000 to 3000 MHz 16 dB 2400 to 2500 MHz 18 dB 100 to 1000 MHz 22 dB 1000 to 3000 MHz 16 dB 2400 to 2500 MHz 18 dB Input 0.1 dB compression 2 RFC-RFX 100 to 3000 MHz 30 dBm IIP3 RFC-RFX 100 to 3000 MHz 66 dBm IIP2 RFC-RFX 100 to 3000 MHz 100 dBm 50% CTRL to 90% or 10% of final value 500 nS 50% CTRL to 90% or 10% of RF 1.5 Switching Time 3 Turn on Time 4 10 Video Feedthrough 5 2.0 µS mV Notes: 1. Specifications under min and max nominal conditions 2. Please refer to Maximum Input Power (50 Ω ) in Table 4 3. Switching time is measured while the part is powered on and one of the control pins is switching state 4. Turn on time is defined as the time it takes the part to go from an unpowered state to 90% RF voltage. Max power can only be applied after the part is turned on 5. Video feedthrough is measured by terminating all ports and measuring peak transients while switching logic state ©2010-2012 Peregrine Semiconductor Corp. All rights reserved. Document No. 70-0326-04 │ UltraCMOS® RFIC Solutions Page 2 of 11 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com PE42430 Product Specification Table 3. Electrical Specifications: Min/Max Performance @ -40 to +85°C, V1, V2 or V3 = 3.0V to 5.5V (ZS = ZL = 50 Ω) Electrical Parameter Path Condition Min Typ 100 Operating Frequency Insertion Loss RFC-RFX Isolation RFX-RFX Isolation RFC-RFX Document No. 70-0326-04 │ www.psemi.com Max Unit 3000 MHz 100 to 1000 MHz 0.45 0.65 dB 1000 to 3000 MHz 0.65 0.95 dB 2400 to 2500 MHz 0.55 0.85 dB 100 to 1000 MHz 35 40 dB 1000 to 3000 MHz 23 28 dB 2400 to 2500 MHz 25 30 dB 100 to 1000 MHz 34 40 dB 1000 to 3000 MHz 23 28 dB 2400 to 2500 MHz 25 30 dB ©2010-2012 Peregrine Semiconductor Corp. All rights reserved. Page 3 of 11 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com PE42430 Product Specification Figure 3. Pin Configuration (Top View) Table 4. Operating Ranges Pin 1 Indicator RFC N/C Parameter 1 8 2 RF1 3 7 V3 6 V2 DGND 5 4 Min Typ Max Units 130 230 µA IDD Power Supply Current IDD VCTRL Control Voltage High VIH 3 5.5 V VCTRL Control Voltage Low VIL 0 0.6 V Operating temperature range TOP -40 +85 °C Maximum Input Power (50 Ω) CW @ +85°C CW @ +25°C Pin +27 +30 dBm dBm RF3 Exposed 9 Ground Paddle V1 Symbol RF2 Table 5. Absolute Maximum Ratings Symbol Table 3. Pin Descriptions Pin # Pin Name Description 1 RFC1 RF Common 2 N/C No Connect 3 V1 Switch Control Input, CMOS logic level 4 RF11 RF I/O 5 RF21 RF I/O 6 V2 Switch Control Input, CMOS Logic Level 7 V3 Switch Control Input, CMOS Logic Level 8 RF31 RF I/O Paddle GND Exposed Ground Paddle. Ground for Proper Device Operation Parameter/Conditions Min Max Units TST Storage temperature range -55 +150 °C PIN Maximum Input Power (50 Ω) 30 dBm VESD ESD Voltage HBM1 All Pins 4500 V VESD ESD Voltage MM2, All Pins 250 V Notes: 1. HBM ESD Voltage (MIL_STD 883 Method 3015.7) 2. MM ESD Voltage (MM, JEDEC JESD22-A115-A ) Exceeding absolute maximum ratings may cause permanent damage. Operation should be restricted to the limits in the Operating Ranges table. Note 1: RF pins 1, 4, 5 and 8 must be at 0 VDC. The RF pins do not require DC blocking capacitors for proper operation if the 0 VDC requirement is met ©2010-2012 Peregrine Semiconductor Corp. All rights reserved. Document No. 70-0326-04 │ UltraCMOS® RFIC Solutions Page 4 of 11 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com PE42430 Product Specification Electrostatic Discharge (ESD) Precautions When handling this UltraCMOS® device, observe the same precautions that you would use with other ESD-sensitive devices. Although this device contains circuitry to protect it from damage due to ESD, precautions should be taken to avoid exceeding the specified rating. Table 6. Truth Table Path V1 V2 V3 RFC - RF1 1 0 0 RFC - RF2 0 1 0 RFC - RF3 0 0 1 Note: Any state other than shown in Table 6 are undefined states Moisture Sensitivity Level The Moisture Sensitivity Level rating for the PE42430 in the 8-lead 1.5 x 1.5 mm DFN package is MSL1. Switching Frequency The PE42430 has a maximum 25 kHz switching rate. Latch-Up Avoidance Unlike conventional CMOS devices, UltraCMOS® devices are immune to latch-up. Document No. 70-0326-04 │ www.psemi.com ©2010-2012 Peregrine Semiconductor Corp. All rights reserved. Page 5 of 11 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com PE42430 Product Specification Figure 4. Insertion Loss vs Temperature (RFX-RFC) Figure 5. Insertion Loss vs VDD (RFX-RFC) Figure 6. Insertion Loss RFX ©2010-2012 Peregrine Semiconductor Corp. All rights reserved. Document No. 70-0326-04 │ UltraCMOS® RFIC Solutions Page 6 of 11 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com PE42430 Product Specification Figure 7. RFX-RFX Isolation vs Temperature Figure 8. RFX-RFX Isolation vs VDD Figure 9. RFC-RFX Isolation vs Temperature Figure 10. RFC-RFX Isolation vs VDD Document No. 70-0326-04 │ www.psemi.com ©2010-2012 Peregrine Semiconductor Corp. All rights reserved. Page 7 of 11 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com PE42430 Product Specification Figure 11. RFC Port Return Loss vs Temperature Figure 12. RFC Port Return Loss vs VDD Figure 13. Active Port Return Loss vs Temperature (RFX) Figure 14. Active Port Return Loss vs VDD (RFX) ©2010-2012 Peregrine Semiconductor Corp. All rights reserved. Document No. 70-0326-04 │ UltraCMOS® RFIC Solutions Page 8 of 11 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com PE42430 Product Specification Evaluation Kit Information Figure 15. Evaluation Board Layouts The SP3T Switch Evaluation Kit facilitates customer evaluation of the PE42430 SP3T switch. The RF common port is connected through a 50 Ω transmission line to J2. Ports 1, 2 and 3 are connected through 50 Ω transmission lines to J3, J5 and J4 respectively. J1 provides digital inputs V1, V2 and V3 to the device. On the back of the board, a through line connects SMA connectors J6 and J7. This transmission line can be used to estimate the PCB loss over the environmental conditions. This four layer board is composed of Rogers 4350 on the top and bottom and FR4 on the inner layers with a total thickness of 0.062”. All transmission lines have 21.5 mil width and 7.25 mil gap. Use jumpers on header J1 to short the control pins to ground for logic low. VDD is supplied to the part through at least one of the control pins via Pins 1, 3 or 5 (V3, V2, V1) on header J1. 101-0604 Figure 16. Evaluation Kit Schematics Document No. 70-0326-04 │ www.psemi.com ©2010-2012 Peregrine Semiconductor Corp. All rights reserved. Page 9 of 11 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com PE42430 Product Specification Figure 17. Mechanical Specifications Symbol A A3 A1 b D D2 E E2 e L K Common Dimensions (mm) Dimensions (in) Min Nom Max Min Nom 0.45 0.50 0.55 0.018 0.020 0.127 ref 0.005 ref 0.00 0.02 0.05 0.000 0.001 0.15 0.20 0.25 0.006 0.008 1.45 1.50 1.55 0.058 0.060 1.15 1.20 1.25 0.046 0.048 1.45 1.50 1.55 0.058 0.060 0.65 0.70 0.75 0.026 0.028 0.40 BSC 0.016 BSC 0.125 0.175 0.225 0.005 0.007 0.200 0.008 - Max 0.022 0.002 0.010 0.062 0.050 0.062 0.030 0.009 - Figure 18. Marking Specifications Marking Spec  Symbol  Package Marking P A-Z ZZ 00-99 Y 0-9 WW 01-53 PZZ YWW 17-0154 ©2010-2012 Peregrine Semiconductor Corp. All rights reserved. Definition Part# code Last two digits of lot code Last digit of year, starƟng from 2011 (1 for 2011,2 for 2012 etc) Work week Document No. 70-0326-04 │ UltraCMOS® RFIC Solutions Page 10 of 11 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com PE42430 Product Specification Figure 19. Tape and Reel Drawing Drawing not drawn to scale Pocket hole diameter 0.6 ± 0.05 mm Bumped die are oriented active side down Maximum cavity angle 5o Table 7. Ordering Information Order Code Description Package Shipping Method PE42430MLAB-Z PE42430 SP3T RF Switch Green 8LD 1.5x1.5 DFN 3000 units T/R EK42430-01 PE42430 Evaluation board Evaluation Kit 1/Box Sales Contact and Information For sales and contact information please visit www.psemi.com. Advance Information: The product is in a formative or design stage. The datasheet contains design target specifications for product development. Specifications and features may change in any manner without notice. Preliminary Specification: The datasheet contains preliminary data. Additional data may be added at a later date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best possible product. Product Specification: The datasheet contains final data. In the event Peregrine decides to change the specifications, Peregrine will notify customers of the intended changes by issuing a CNF (Customer Notification Form). The information in this datasheet is believed to be reliable. However, Peregrine assumes no liability for the use of this information. Use shall be entirely at the user’s own risk. Document No. 70-0326-04 │ www.psemi.com No patent rights or licenses to any circuits described in this datasheet are implied or granted to any third party. Peregrine’s products are not designed or intended for use in devices or systems intended for surgical implant, or in other applications intended to support or sustain life, or in any application in which the failure of the Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no liability for damages, including consequential or incidental damages, arising out of the use of its products in such applications. The Peregrine name, logo, UltraCMOS and UTSi are registered trademarks and HaRP, MultiSwitch and DuNE are trademarks of Peregrine Semiconductor Corp. ©2010-2012 Peregrine Semiconductor Corp. All rights reserved. Page 11 of 11 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com