PE42440

Product Specification PE42440 Product Description The PE42440 is a HaRP™-enhanced SP4T RF Switch developed on the UltraCMOS™ process technology. This general-purpose switch contains 4 identical RF ports and can be used in a multitude of applications up to 3000 MHz. It integrates on-board CMOS control logic with a low voltage CMOS-compatible control interface and requires no DC blocking capacitors. This RoHS-compliant part is available in a standard 3x3x0.75mm QFN package. Peregrine’s HaRP™ technology enhancements deliver high linearity and exceptional harmonics performance. It is an innovative feature of the UltraCMOS™ process, providing performance superior to GaAs with the economy and integration of conventional CMOS. SP4T UltraCMOS™ RF Switch 50 – 3000 MHz Features • HaRPTM - enhanced Technology for Unparalleled Linearity • Very Low Insertion Loss: 0.45 dB @ 1000 MHz, 0.5 dB @ 2000 MHz • Very high isolation: 34 dB @ 1000 MHz, 28 dB @ 2000 MHz • Exceptionally high ESD tolerance: • • Class 3 (4.0 kV HBM) on RFC pin Class 2 (2.0 kV HBM) on all pins • Integrated decoder for 2-pin control Accepts 1.8V and 2.75V control logic levels • Low 4.5 ohm series ON resistance • No blocking capacitors required • Figure 1. Functional Diagram RFC Figure 2. Package Type 16-lead 3x3 mm QFN ESD RF3 ESD ESD RF1 RF4 ESD RF2 CMOS Control/Driver and ESD CTRL CTRL Vdd ESD Document No. 70-0294-01 │ www.psemi.com ©2009 Peregrine Semiconductor Corp. All rights reserved. Page 1 of 9 PE42440 Product Specification Table 1. Electrical Specifications: Temp = 25°C, VDD = 2.75 V (ZS = ZL = 50 Ω) Parameter Operational Frequency 50 MHz - 1000 MHz Insertion Loss (RFC - RFX) 1000 MHz - 2000 MHz 2000 MHz - 3000 MHz 50 MHz - 1000 MHz Return Loss (RFC - RFX, Active Ports) 1000 MHz - 2000 MHz 2000 MHz - 3000 MHz 50 MHz - 1000 MHz Isolation (RFC - RFX) 1000 MHz - 2000 MHz 2000 MHz - 3000 MHz Input IP2 Input IP3 P1dB1 Switching time 50 - 3000 MHz, +18dBm per tone, 1MHz spacing 50 - 3000 MHz, +18dBm per tone, 1MHz spacing 50 - 3000 MHz 50% CNTL to 10/90% of RF Condition Min 50 31 25 20 Typ Max 3000 Units MHz dB dB dB dB dB dB dB dB dB dBm dBm dBm µs 0.45 0.5 0.85 22 15 11 34 28 22 96 67 41.5 2 0.65 0.7 1.15 - Note: 1. Please refer to Maximum Operating Pin (50Ω) in Table 4 Table 2. Electrical Specifications, Worst Case Conditions: Temp = 85°C, VDD = 2.65 V (ZS = ZL = 50 Ω) Parameter Operational Frequency 50 MHz - 1000 MHz Insertion Loss (RFC - RFX) 1000 MHz - 2000 MHz 2000 MHz - 3000 MHz 50 MHz - 1000 MHz Return Loss (RFC - RFX, Active Ports) 1000 MHz - 2000 MHz 2000 MHz - 3000 MHz 50 MHz - 1000 MHz Isolation (RFC - RFX) 1000 MHz - 2000 MHz 2000 MHz - 3000 MHz Input IP2 Input IP3 P1dB2 Switching time 50 - 3000 MHz, +18dBm per tone, 1MHz spacing 50 - 3000 MHz, +18dBm per tone, 1MHz spacing 50 - 3000 MHz 50% CNTL to 10/90% of RF Condition Min 50 30 24 20 Typ Max 3000 Units MHz dB dB dB dB dB dB dB dB dB dBm dBm dBm µs 0.5 0.65 1.0 21 15 10 32 26 22 95 66 41 2 0.65 0.75 1.25 - Note: 2. Please refer to Maximum Operating Pin (50Ω) in Table 4 ©2009 Peregrine Semiconductor Corp. All rights reserved. Page 2 of 9 Document No. 70-0294-01 │ U ltraCMOS™ RFIC Solutions PE42440 Product Specification Figure 3. Pin Configuration (Top View) GND RF2 RF1 N/C Table 5. Absolute Maximum Ratings Symbol VDD Pin 1 Parameter/Conditions Power supply voltage Voltage on any DC input RF input power (50-500 MHz) (500-3000 MHz) HBM5 ESD Voltage, RFC pin HBM5 ESD Voltage, all pins Min -0.3 -0.3 Max 4.0 VDD+ 0.3 +28 +33 4000 2000 300 100 Units V V dBm dBm V V V V 16 14 15 13 GND VDD V2 V1 1 2 3 4 12 GND RFC GND GND VI PIN(50 Ω)4 Exposed Ground Paddle 11 10 9 5 6 7 8 VESD MM ESD Voltage, RFC pin MM ESD Voltage, all pins RF4 GND Table 3. Pin Descriptions Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Paddle Pin Name GND VDD V2 V1 GND RF43 GND RF3 3 GND RF3 Description Ground Supply Switch control input, CMOS logic level Switch control input, CMOS logic level Ground RF Port 4 Ground RF Port 3 Ground Ground RF Common Ground RF Port 1 Ground RF Port 2 No Connect Exposed ground paddle Note: 4. VDD within operating range specified in Table 3. 5. ESD Voltage (HBM, MIL-STD-883 Method 3015.7) Exceeding absolute maximum ratings may cause permanent damage. Operation should be restricted to the limits in the Operating Ranges table. Operation between operating range maximum and absolute maximum for extended periods may reduce reliability. Table 6. Truth Table Path RFC – RF1 RFC – RF2 RFC – RF3 RFC – RF4 GND GND RFC3 GND RF1 3 V2 0 1 0 1 V1 0 0 1 1 GND RF23 N/C GND Electrostatic Discharge (ESD) Precautions When handling this UltraCMOS™ device, observe the same precautions that you would use with other ESDsensitive devices. Although this device contains circuitry to protect it from damage due to ESD, precautions should be taken to avoid exceeding the specified rating. Note: 3. All RF pins must be DC blocked with an external series capacitor or held at 0 VDC. Table 4. Operating Ranges Parameter VDD Supply Voltage IDD Power Supply Current (VDD = 2.75 V) RF input power (50 Ω) (50-500 MHz) (500-3000 MHz) Control Voltage High Control Voltage Low Temperature range Storage Temperature Range Symbol Min Typ Max Units VDD IDD 2.65 2.75 13 3.3 50 V µA Latch-Up Avoidance Unlike conventional CMOS devices, UltraCMOS™ devices are immune to latch-up. Moisture Sensitivity Level PIN VIH VIL TOP TST -40 -65 +25 1.4 0.4 +85 +28 +33 dBm dBm V V °C °C ©2009 Peregrine Semiconductor Corp. All rights reserved. Page 3 of 9 The Moisture Sensitivity Level rating for the PE42440 in the 16-lead 3x3 QFN package is MSL1. Switching Frequency The PE42440 has a maximum 25 kHz switching rate. +25 +160 Document No. 70-0294-01 │ www.psemi.com PE42440 Product Specification Evaluation Kit The SP4T switch EK Board was designed to ease customer evaluation of Peregrine’s PE42440. The RF common port is connected through a 50 Ω transmission line via the top SMA connector, J1. RF1, RF2, RF3 and RF4 are connected through 50 Ω transmission lines via SMA connectors J3, J5, J2 and J4, respectively. A through 50 Ω transmission is available via SMA connectors J6 and J7. This transmission line can be used to estimate the loss of the PCB over the environmental conditions being evaluated. The board is constructed of a four metal layer FR4 material with a total thickness of 62 mils. The middle layers provide ground for the transmission lines. The transmission lines were designed using a coplanar waveguide with ground plane model using a trace width of 32 mils, trace gaps of 25 mils, and metal thickness of 2.1 mils. Figure 4. Evaluation Board Layouts Peregrine Specification 101/0287 Figure 5. Evaluation Board Schematic Peregrine Specification 102/0339 J1 SMASM 2 GND ANT GND 2 RF1 GND RF2 GND U1 QFN50P3X3-16P RF3 GND RF4 GND 14 J5 SMASM 1 15 RF2 16 7 6 5 RF4 1 J4 SMASM GND VDD V2 V1 2 1 2 3 J8 HEADER 14 14 12 10 8 6 4 2 14 12 10 8 6 4 2 13 11 9 7 5 3 1 13 11 9 7 VDD 5 3 V2 1 V1 C4 DNI R2 R1 1M 1M 4 C3 DNI C2 DNI C1 DNI J6 SMASM 1 2 2 13 GND J3 SMASM 1 ANT 1 J2 SMASM RF3 8 1 12 11 10 RF1 9 Through Line J7 SMASM 1 2 Unlabeled Test Line ©2009 Peregrine Semiconductor Corp. All rights reserved. Page 4 of 9 Document No. 70-0294-01 │ U ltraCMOS™ RFIC Solutions 2 PE42440 Product Specification Figure 6. Insertion Loss: RFC-RF @ 25 °C Figure 7. Insertion Loss: RFC-RF @ 2.75 V Figure 8. Isolation: RFC-RF @ 25 °C Figure 9. Isolation: RFC-RF @ 2.75 V Document No. 70-0294-01 │ www.psemi.com ©2009 Peregrine Semiconductor Corp. All rights reserved. Page 5 of 9 PE42440 Product Specification Figure 10. Return Loss at active port @ 25 °C Figure 11. Return Loss at active port @ 2.75 V ©2009 Peregrine Semiconductor Corp. All rights reserved. Page 6 of 9 Document No. 70-0294-01 │ U ltraCMOS™ RFIC Solutions PE42440 Product Specification Figure 12. Package Drawing 16-lead 3x3mm QFN: 19-0128-01 QFN 3x3 mm MAX 0.800 0.750 0.700 A NOM MIN Figure 13. Marking Specifications 42440 YYWW ZZZZZ YYWW = Date Code ZZZZZ = Last five digits of Lot Number Document No. 70-0294-01 │ www.psemi.com ©2009 Peregrine Semiconductor Corp. All rights reserved. Page 7 of 9 PE42440 Product Specification Figure 14. Tape and Reel Specifications 16-lead 3x3 mm QFN Tape Feed Direction Pin 1 Top of Device Device Orientation in Tape Table 7. Ordering Information Order Code PE42440MLIBA PE42440MLIBA-Z EK42440-01 Part Marking 42440 42440 PE42440-EK Description PE42440G-16QFN 3x3mm-loose or cut tape PE42440G-16QFN 3x3mm-3000C PE42440-16QFN 3x3mm-EK Package Green 16-lead 3x3mm QFN Green 16-lead 3x3mm QFN Evaluation Kit Shipping Method Loose or cut tape 3000 units / T&R 1 / Box ©2009 Peregrine Semiconductor Corp. All rights reserved. Page 8 of 9 Document No. 70-0294-01 │ U ltraCMOS™ RFIC Solutions PE42440 Product Specification Sales Offices The Americas Peregrine Semiconductor Corporation 9380 Carroll Park Drive San Diego, CA 92121 Tel: 858-731-9400 Fax: 858-731-9499 Peregrine Semiconductor, Asia Pacific (APAC) Shanghai, 200040, P.R. China Tel: +86-21-5836-8276 Fax: +86-21-5836-7652 Peregrine Semiconductor, Korea #B-2607, Kolon Tripolis, 210 Geumgok-dong, Bundang-gu, Seongnam-si Gyeonggi-do, 463-943 South Korea Tel: +82-31-728-3939 Fax: +82-31-728-3940 Europe Peregrine Semiconductor Europe Bâtiment Maine 13-15 rue des Quatre Vents F-92380 Garches, France Tel: +33-1-4741-9173 Fax : +33-1-4741-9173 Peregrine Semiconductor K.K., Japan Teikoku Hotel Tower 10B-6 1-1-1 Uchisaiwai-cho, Chiyoda-ku Tokyo 100-0011 Japan Tel: +81-3-3502-5211 Fax: +81-3-3502-5213 High-Reliability and Defense Products Americas San Diego, CA, USA Phone: 858-731-9475 Fax: 848-731-9499 Europe/Asia-Pacific Aix-En-Provence Cedex 3, France Phone: +33-4-4239-3361 Fax: +33-4-4239-7227 For a list of representatives in your area, please refer to our Web site at: www.psemi.com Data Sheet Identification Advance Information The product is in a formative or design stage. The data sheet contains design target specifications for product development. Specifications and features may change in any manner without notice. The information in this data sheet is believed to be reliable. However, Peregrine assumes no liability for the use of this information. Use shall be entirely at the user’s own risk. No patent rights or licenses to any circuits described in this data sheet are implied or granted to any third party. Peregrine’s products are not designed or intended for use in devices or systems intended for surgical implant, or in other applications intended to support or sustain life, or in any application in which the failure of the Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no liability for damages, including consequential or incidental damages, arising out of the use of its products in such applications. The Peregrine name, logo, and UTSi are registered trademarks and UltraCMOS, HaRP, MultiSwitch and DuNE are trademarks of Peregrine Semiconductor Corp. ©2009 Peregrine Semiconductor Corp. All rights reserved. Page 9 of 9 Preliminary Specification The data sheet contains preliminary data. Additional data may be added at a later date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best possible product. Product Specification The data sheet contains final data. In the event Peregrine decides to change the specifications, Peregrine will notify customers of the intended changes by issuing a CNF (Customer Notification Form). Document No. 70-0294-01 │ www.psemi.com