PE42750MLAA-Z

Product Specification PE42750 75Ω Terminated 5 - 2200 MHz SPDT CATV UltraCMOS® Switch Featuring Unpowered Operation Product Description The PE42750 is an SPDT UltraCMOS® switch designed for broadband applications such as CATV, DTV, MultiTuner Digital Video Recorder (DVR ), Set-top Box, PCTV and Video Game Consoles. The PE42750 meets FCC 15.115 specification of 80 dB isolation at 216 MHz in both powered and unpowered states. The PE42750 covers a broad frequency range from 5 MHz to 2200 MHz with a single positive supply and CMOS control. The PE42750 provides a smaller, cost effective, more reliable and manufacturable alternative to mechanical relays in settop box applications. Features • Meets FCC 15.115 isolation specification • All ports terminated when unpowered • 2000V HBM ESD tolerance, all ports • High isolation: 63 dB at 1000 MHz • Low insertion loss, typical: • 0.7 dB at 5 MHz • 1.0 dB at 1000 MHz The PE42750 is manufactured using PSemi’s UltraCMOS® process, a patented variation of silicon-oninsulator (SOI) technology on a sapphire substrate, offering the performance of GaAs with the economy and integration of conventional CMOS. Figure 1. Functional Diagram • CMOS single-pin control with logic select • Single +3 volt supply operation • Low current consumption: 8 μA • Absorptive switch design Figure 2. Package Type PSemi Specification 71-0013-02 12-lead 3 x 3 x 0.75 mm QFN ESD RFC 75Ω RF2 RF1 ESD ESD 75Ω CMOS Control Driver C1 75Ω C2 Document No. DOC-03735-2 │ www.psemi.com ©2010-2019 pSemi Corporation All rights reserved. Page 1 of 9 PE42750 Product Specification Table 1. Electrical Specifications @ +25°C, VDD = +3V (ZS = ZL = 75Ω) Parameter Condition Operating Frequency Insertion Loss - RFX to RFC Minimum 5 5 to 220 MHz 221 to 550 MHz 551 to 810 MHz 811 to 870 MHz 871 to 2200 MHz Isolation - RFX to RFX3 Isolation - RFX to RFC Return Loss - RFX to RFC Typical Maximum Unit 2200 MHz 0.7 0.8 0.9 0.9 0.8 0.9 1.0 1.0 1.7 1.8 5 to 220 MHz 221 to 550 MHz 551 to 810 MHz 811 to 870 MHz 871 to 2200 MHz 80 70 65 65 50 84 76 72 71 57 5 to 220 MHz 221 to 550 MHz 551 to 810 MHz 811 to 870 MHz 871 to 2200 MHz 5 to 220 MHz 221 to 550 MHz 551 to 810 MHz 811 to 870 MHz 871 to 2200 MHz 74 67 65 65 51 80 72 70 70 55 23 20 18 17 10 dB dB dB dB IIP2 - RFX1 5-2200 MHz 100 dBm IIP3 - RFX1,4 5-2200 MHz 47.5 dBm 23.5 dBm Input 1 dB Compression - RFX or RFC1 Switching time 2 Video Feedthough Notes: 1. 2. 3. 4. 1000 MHz 21.5 50% CTRL to 10/90% RF 2 2 3 2 µs mVpp Measured in a 50Ω system 0/3V on control pin, 1 ns rise time Minimum per FCC 15.115 spec 10 dBm per tone for 1:3 ratio of fundamental to IMD3 products Table 2. Electrical Characterization (Unpowered Operation) Parameter Condition Minimum 5 to 220 MHz 83 90 221 to 550 MHz 77 83 551 to 810 MHz 73 79 811 to 870 MHz 73 79 871 to 2200 MHz 65 72 Operating Frequency Isolation - F1 to RF2 5 ©2010-2019 ©2010-2019 pSemi Corporation All rights reserved. Page 2 of 9 Typical Maximum Unit 2200 MHz dB Document No. DOC-03735-2 │ UltraCMOS® RFIC Solutions PE42750 Product Specification 3 GND Table 4. Operating Conditions @ 25°C C2 Parameter VDD Power Supply 10 6 GND GND 2 5 RF1 Exposed Ground Paddle RFC 1 4 GND 11 12 C1 VDD Figure 3. Pin Configuration (Top View) Min Typ Max Unit 2.7 3.0 3.63 V IDD Power Supply Current (VDD = 3V, VCNTL = 3V) 9 GND 8 RF2 7 GND 8 μA Control Voltage High 0.7 x VDD VDD V Control Voltage Low 0 0.3 x VDD V 23/26 dBm +85 °C PRF RF power on RFC, RF1, RF2 Terminated/ Through 75Ω TOP Operating Temperature -40 Operation should be restricted to the limits in the Operating Ranges table. Table 5. Absolute Maximum Ratings Parameter/Condition Table 3. Pin Descriptions Description Min Max Unit VDD Power supply voltage -0.3 4.0 V VI Voltage on CTRL input -0.3 VDD + 0.3 V 23/26 dBm +150 °C No. Name 1 GND RF Ground 2 RF11 RF I/O PRF RF power on RFC, RF1, RF2 Terminated/Through 75Ω 3 GND RF Ground TST Storage temperature 4 GND RF Ground 5 RFC1 RF Common 6 GND RF Ground VESD ESD Voltage, HBM, MIL_STD 883, Method 3015.7 VESD MM ESD Voltage all pins JEDEC JESD22-A115-A 7 GND RF Ground 8 RF21 RF I/O 9 GND RF Ground 10 C22 Control 2 (or logic select) 11 2 C1 Control 1 (or logic select) 12 VDD Supply Pad GND Exposed Ground Paddle Notes: 1. RF pins 2, 5, and 8 must be at 0V DC. The RF pins do not require DC blocking capacitors for proper operation if the 0V DC requirement is met 2. Pins 10 and 11 can be set for single pin control 3. GND must be connected to exposed ground paddle to ensure good isolation Moisture Sensitivity Level The Moisture Sensitivity Level rating for the PE42750 in the 12-lead 3 x 3 x 0.75 mm QFN package is MSL1. Switching Frequency The PE42750 has a maximum 25 kHz switching rate. Latch-Up Avoidance Unlike conventional CMOS devices, UltraCMOS® devices are immune to latch-up. Document No. DOC-03735-2 │ www.psemi.com -55 2000 150 VESD CDM ESD Voltage JEDEC JESD22-C101D V 1000 Exceeding absolute maximum ratings may cause permanent damage. Operation between operating range maximum and absolute maximum for extended periods may reduce reliability. Electrostatic Discharge (ESD) Precautions When handling this UltraCMOS® device, observe the same precautions that you would use with other ESDsensitive devices. Although this device contains circuitry to protect it from damage due to ESD, precautions should be taken to avoid exceeding the rating specified. Table 6. Truth Table1 VDD C1 C2 RFC – RF1 RFC – RF2 OFF Low Low OFF OFF ON Low Low ON OFF ON Low High OFF ON ON High Low OFF ON ON High High ON OFF 2 Note: 1. A versatile logic table has been established to allow either C1 or C2 to act as a single pin control and in either polarity 2. VDD at “OFF” represents an all terminated state ©2010-2019 pSemi Corporation All rights reserved. Page 3 of 9 PE42750 Product Specification Performance Plots @ 25°C and 3.0V unless otherwise specified. Figure 5. Insertion Loss vs Temperature (RFX-RFC) 0 0 -0.5 -0.5 -1 RF1 -1.5 RF2 Loss (dB) Loss (dB) Figure 4. Nominal Insertion Loss (RFX-RFC) -1 25 deg C -40 deg C -1.5 85 deg C -2 -2 -2.5 0 0.5 1 1.5 2 2.5 -2.5 3 0 0.5 Frequency (GHz) 1 1.5 2 2.5 3 Frequency (GHz) Figure 7. Active Port Return Loss vs Temperature (RFX) Figure 6. Insertion Loss vs VDD (RFX-RFC) 0 0 -5 -0.5 3.0 V 2.7 V -1.5 Loss (dB) Loss (dB) -10 -1 3.3 V -40 deg C -15 -20 -2 -25 -2.5 -30 0 0.5 1 1.5 2 2.5 25 deg C 85 deg C 0 3 0.5 Frequency (GHz) Figure 8. Active Port Return Loss vs VDD (RFX) 1.5 2 2.5 3 Figure 9. RFC Port Return Loss vs Temperature 0 0 -5 -5 -10 -10 2.7 V -15 3.0 V -20 3.3 V Loss (dB) Loss (dB) 1 Frequency (GHz) -25 -30 -30 0.5 1 1.5 2 2.5 3 Frequency (GHz) ©2010-2019 ©2010-2019 pSemi Corporation All rights reserved. Page 4 of 9 25 deg C -20 -25 0 -40 deg C -15 85 deg C 0 0.5 1 1.5 2 2.5 3 Frequency (GHz) Document No. DOC-03735-2 │ UltraCMOS® RFIC Solutions PE42750 Product Specification Figure 11. RF1-RF2 Isolation vs VDD Figure 10. RFC Port Return Loss vs VDD 0 -40 -50 -10 2.7 V -15 3.0 V -20 Loss (dB) Loss (dB) -5 -60 3.3 V 3.3 V -90 -100 -30 0 0 0.5 1 1.5 2 Frequency (GHz) 2.5 -50 -60 -40 deg C 25 deg C -80 85 deg C Loss (dB) -50 -70 -100 Frequency (GHz) 2.5 3 VDD=0V -80 -100 2 2.5 -70 -90 1.5 2 -60 -90 1 1.5 Figure 13. Unpowered RF1-RF2 Isolation -40 0.5 1 Frequency (GHz) -40 0 0.5 3 Figure 12. RF1-RF2 Isolation vs Temperature Loss (dB) 3.0 V -80 -25 0 3 0.5 1 1.5 2 2.5 3 Frequency (GHz) Figure 14. RFX-RFC Isolation Figure 15. Input IIP3 RFC-RFX -40 70 -50 60 -60 Measured Performance on EVK PCB -70 -80 Extrapolated Performance* -90 50 IIP3 (dBm) Isolation (dB) 2.7 V -70 40 RFX 30 20 -100 10 -110 0.0 0.5 1.0 1.5 2.0 Frequency (GHz) 2.5 3.0 Note: EVK-PCB-related resonance removed from dataset. Extrapolated performance shown represents true performance of part. Document No. DOC-03735-2 │ www.psemi.com 0 0 0.5 1 1.5 2 Frequency (GHz) 2.5 3 ©2010-2019 pSemi Corporation All rights reserved. Page 5 of 9 PE42750 Product Specification Typical Applications The PE42750 provides the high isolation required by FCC part 15.115 regulation between the television antenna and the cable plant. The advantage of the PE42750 is that device isolation performance is maintained when power is removed. When the PE42750 is unpowered all ports are terminated. Figure 16. Typical Application (1 of 3) Antenna Input 80dB 54 – 216MHz 60dB 216 – 550MHz 55dB 550 – 806MHz PE42750 DTV-Tuner SPDT CATV Input Figure 17. Typical Application (2 of 3) TV Set / Cable Set-top Box PE42750 SPDT RF2 Tuner CATV Input 75Ω OFF – Terminated Figure 18. Typical Application (3 of 3) Dual Tuner DTV / DVR / Set-top Box Antenna Input Power Splitter PE42750 SPDT DTV Tuner Power Splitter PE42750 SPDT DTV-Tuner 80dB 54 – 216MHz 60dB 216 – 550MHz 55dB 550 – 806MHz CATV Input ©2010-2019 ©2010-2019 pSemi Corporation All rights reserved. Page 6 of 9 Document No. DOC-03735-2 │ UltraCMOS® RFIC Solutions PE42750 Product Specification Evaluation Kit Information Figure 20. Evaluation Board Layouts The SPDT Switch Evaluation Kit facilitates customer evaluation of the PE42750 SPDT switch. The RF common port is connected through a 75Ω transmission line to J2. Ports 1 and 2 are connected through 75Ω transmission lines to J1 and J3. A through line connects F connectors J4 and J5. This transmission line can be used to estimate the PCB loss over the environmental conditions. J6 provides DC and digital inputs to the device. PSemi Specification PRT-51234 The board is composed of a two metal layer FR4 material with a total thickness of 0.032”. The transmission lines are hybrid microstrip/coplanar waveguide with ground plane (28 mil core, 12 mil width, 12 mil gap). The provided jumpers short the control pins to ground for logic low. With the jumper removed the control input rises to VDD for logic high through the 1 MΩ pull up resistor. These resistors will draw several microamps from VDD. They are not required for normal operation. Figure 19. Evaluation Board Schematic J6 HEADER 14 PSemi Specification DOC-02571 1 3 5 7 9 11 13 NOTES: 1. USE 101-0491-01 2. CAUTION: CONTAINS PARTS AND ASSEMBLIES SUSCEPTIBLE TO DAMAGE BY ELECTROSTATIC DISCHARGE (ESD) C1 DNI C2 10 C3 DNI QFN_12L_3X3 GND GND 9 RF2 8 GND 7 J3 CBJE130-2 75 OHM T-Line RF2 1 75 OHM T-Line J4 CBJE130-2 2 1 Document No. DOC-03735-2 │ www.psemi.com 75 OHM T-Line J5 CBJE130-2 1 2 RFC 2 1 C2 DNI 2 RF1 U1 4 J2 CBJE130-2 11 GND GND 2 3 R2 1M 2 4 6 8 10 12 14 GND 1 2 R1 1M GND GND GND GND GND GND GND 6 75 OHM T-Line RF1 RFC 1 5 J1 CBJE130-2 C1 VDD 12 3. ALL TRANSMISION LINES ARE: 12MIL WIDTH, 12MIL GAPS, 28MIL CORE DIELECTRIC 4.3 Er AND 2.1MIL Cu THICKNESS. C1 C2 GND GND VDD GND GND ©2010-2019 pSemi Corporation All rights reserved. Page 7 of 9 PE42750 Product Specification Figure 21. Package Drawing 12-lead 3x3 mm QFN DOC-53275 Figure 22. Marking Specifications 42750 YYWW ZZZZZ = Pin 1 designator AAAAA = Five digit part number YYWW = Date Code, last two digits of the year and work week ZZZZZ = Five digits of the lot number DOC-51207 ©2010-2019 ©2010-2019 pSemi Corporation All rights reserved. Page 8 of 9 Document No. DOC-03735-2 │ UltraCMOS® RFIC Solutions PE42750 Product Specification Figure 23. Tape and Reel Specifications Tape Feed Direction Ao = 3.30 ± 0.1 mm Bo = 3.30 ± 0.1 mm Ko = 1.10 ± 0.1 mm Pin 1 Top of Device Device Orientation in Tape Table 7. Ordering Information Order Code Description Package Shipping Method PE42750MLAA-Z PE42750G-12LQFN 3x3mm-3000C Green 12-lead 3x3mm QFN 3,000 Dice/Reel EK42750-01 PE42750-EK Evaluation Kit 1/box Sales Contact and Information For sales and contact information please visit www.psemi.com. Document No. DOC-03735-2 │ www.psemi.com ©2010-2019 pSemi Corporation All rights reserved. Page 9 of 9