SN10GE159

TM Application Specific Crystal Oscillator 7.0 x 5.0mm 3.3V PECL Low Jitter 159.375MHz 10Gb-FC XO SN10GE159 7.0 x 5.0mm Ceramic SMD ASSP XO™ for Networking Package: Product Features • Very low phase jitter - 0.5ps RMS • Thicker crystal for improved reliability • Pb-free & RoHS compliant • Industrial temperature range Recommended Land Pattern: Product Description The SN series 3.3V, 159.375MHz crystal clock oscillator achieves superb jitter for 10Gigabit Fibre Channel (10Gb-FC) applications. The output clock signal, generated internally with a patented oscillator design, is compatible with LVPECL logic levels. The device, available on tape and reel, is contained in a 7.0 x 5.0mm surface-mount ceramic package. Pin Functions: Pin Function 1 2 3 4 5 6 OE Function N/C Ground OUT OUT VCC Applications • 10 Gigabit Fibre Channel Network Interface Card (NIC) • 10 Gigabit Fibre Channel Switch • 10 Gigabit Fibre Channel PHY Module *Extended high frequency power decoupling is recommended (see test circuit for minimum recommendation). To ensure optimal performance, do not route RF traces beneath the package. Part Ordering Information: SN10GE159 SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 10-0020 • www.pericom.com 04/09/10 1 All specifications are subject to change without notice. SN10GE159 Rev C 3.3V PECL Low Jitter 159.375 MHz 10Gb-FC XO SN10GE159 TM Application Specific Crystal Oscillator 7.0 x 5.0mm Electrical Performance Parameter Min. Typ. Max. Units Notes Output Frequency Supply Voltage Supply Current, Output Enabled Supply Current, Output Disabled Frequency Stability Operating Temperature Range Output Logic 0, VOL Output Logic 1, VOH Output Load Duty Cycle Rise and Fall Time Jitter, Phase RMS (1-σ) Jitter, pk– pk 45 VCC – 1.025 VCC – 1.085 -20 2.97 159.375 3.30 45 3.63 70 25 ±50 +70 VCC – 1.620 VCC – 1.555 MHz V mA mA ppm °C V V V V 0 to +85°C -40 to 0°C 0 to +85°C -40 to +0°C output requires termination % ns ps ps Measured 50% V DD Measured 20/80% of waveform 12 kHz to 20 MHz frequency band 100,000 random periods See Note 1 below 50Ω to VCC – 2V 55 0.3 0.25 25 0.6 0.5 40 Notes: 1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25°C), aging (5 year at 40°C average effective ambient temperature), shock and vibration. 2. For specifications othere than those listed, please contact sales. Output Enable / Disable Function Parameter Min. Typ. Max. Units Notes Input Voltage (pin 1), Output Enable Input Voltage (pin 1), Output Disable (low power standby) Internal Pullup Resistance Output Disable Delay Output Enable Delay 2.2 0.8 50 200 10 V V kΩ ns ms or open Outputs disabled to Hi-Z Absolute Maximum Ratings Parameter Min. Typ. Max. Units Notes Storage Temperature -55 +125 °C For the latest product information visit: http://www.pericom.com/products/timing/oscillators/SN10GE159/ For test circuit go to: http://www.pericom.com/pdf/sre/tc_pecl.pdf For soldering reflow profile and reliability test ratings go to: http://www.pericom.com/pdf/sre/reflow.pdf For typical phase noise go to: http://www.pericom.com/pdf/sre/pn_SN10GE159.pdf For tape and reel information go to: http://www.pericom.com/pdf/sre/tr_7050.pdf SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 10-0020 • www.pericom.com 04/09/10 2 All specifications are subject to change without notice. SN10GE159 Rev C