LHI907

Lighting | Imaging | Telecom Pyroelectric Infrared Detectors Single Element Detector LHi 907 Round element design with compensation Single FET output Designed for ceiling mount applications The LHi 907 pyroelectric infrared-detector is a special design for motion control in ceiling mount applications. It includes a pyroelectric ceramic with a round sensitive element connected to one FET in source follower connection, and a compensational second element. This detector is available in TO-5 housing with a standard infrared filter. It offers low noise, and special field of view and capture for ceiling mount applications. Parameters min Element size R esponsivity 3300 LHi 907 p DATASHEET typical 1,77 4000 ma x units mm2 V /W condition (1 element) 100°C, 1 Hz Noise 20 50 µV pp 25°C , 0,3...10Hz Offset Voltage Right for modification reserved / WS /, 29.6.2001 0,2 1,5 7,5x10-10 23x10-10 V W Ö Hz RS =47kW , 25°C 1Hz Bw, 100°C, 1 Hz NEP D* Output Impedance Operating Voltage Field of View, horizontal vertical Operating Temp. Field of View 6x10 7 19x10 5 7 cm Ö Hz/W 1Hz Bw, 100°C, 1 Hz 10 15 kW V RS =47kW , 25°C RS =47kW , 25°C unobstructed unobstructed 85 85 °C °C non permanent non permanent 2 150° 145° -40 -40 S torage Temperature 10 R [kV/W] 1 0,1 0,01 0,1 f [Hz] 1 10 Frequency Response Europe: PerkinElmer Optoelectronics GmbH Wenzel Jaksch Str 31 Wiesbaden / Germany Phone +49(0)611 492 0 Fax +49(0)611 492 170 USA: PerkinElmer Optoelectronics 2175 Mission Colledge Blvd Santa Clara, CA 95054 Phone +408 565 0830 Fax +408 565 0703 all Dimensions in mm Dimensions in mmm Asia: PerkinElmer Optoelectronics 47, Ayer Rajah Crescent #06-12 Singapore 139947 Phone +65 775 2022 Fax +65 775 1008 www.perkinelmer.com/opto