M2300

FEATURES - HIGH RELIABILITY FOR LOW COST - FREQUENCY STABILITY TO +-15 PPM - JITTER OPTIMIZED DIP 14 CLOCK OSCILLATOR - EXCELLENT CLOCK SIGNAL GENERATOR FOR DSP'S AND CPU'S - EXTENDED TEMPERATURE RANGE TO -40/+85°C PETERMANN TECHNIK Time & Frequency Components M2300 14 PIN DIP 500.0 kHz ~ 125.0 MHz +-15 ~ +-100 ppm +-5 ppm after first year 0/+70°C ~ -40/+85°C -55/+125°C +3.3 VDC +-10% 15 mA max. < 24.0 MHz INPUT 20 mA max. < 50.0 MHz CURRENT 30 mA max. < 80.0 MHz 40 mA max. < 125 MHz STANDARD 40/60% SYMMETRY OPTION 45/55% RISE AND FALL TIME HCMOS 10 ns max. (10% VDD ~ 90% VDD) OUTPUT "0" LEVEL 10% VDD max. HCMOS 3.3 VOLT "1" LEVEL 90% VDD min. 15 pF LOAD HCMOS WITHOUT ENABLE/DISABLE FUNCTION STANDARD PIN 1 WITH ENABLE/DISABLE FUNCTION OPTION PIN 8 OUTPUT PIN 1 INPUT TRISTATE LOGIC TABLE 2.0V MIN. OR NOT CONNECTED OSCILLATION 0.8V MAX. OR GND HIGH IMPEDANCE PIN CONNECTION SEE OUTLINE DRAWINGS START-UP TIME 10 ms max. PERIOD JITTER RMS 8 ps max. OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION SERIES PACKAGE FREQUENCY RANGE FREQUENCY STABILITY AGING OPERATING TEMPERATURE RANGE STORAGE TEMPERATURE RANGE VOLTAGE PART NUMBERING SYSTEM EXAMPLE SERIES FREQUENCY STABILITY M2300 BLANK FOR 100 PPM ANY 50 ~ 15 PPM BLANK FOR 0/+70°C N = -10/+60°C M = -20/+70°C W = -40/+85°C BLANK FOR 40/60% S FOR 45/55% BLANK FOR NO E/D E FOR E/D BLANK FOR DIP G FOR GULL WING REQUIRED FREQUENCY M2300-25-W-S-E-G-125.0MHz TEMPERATURE RANGE SYMMETRY PIN 1 ENABLE/DISABLE PIN CONFIGURATION FREQUENCY PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | info@petermann-technik.de PETERMANN TECHNIK Time & Frequency Components OUTLINE DRAWING OF M2300 OUTLINE DRAWING OF M2300 GULL WING 6.1max 5.3max 14.98+0.2 7.49+0.1 - #7 #8 0.8 #1 #7(Grounded to the Case) 13.1max 7.62 1.14 7.62+0.1 14.98+0.2 - 0.63+0.1 TYP(4 PLACES) 1.35+0.1 #1 #14 12.95max #14 15.24 #8 20.4max PIN #1 #7 #8 #14 Connection NC/Tri-State GND Output VDD Unit:mm 15.24+0.1 - Unit: mm TEST CIRCUIT FOR HCMOS HCMOS OUTPUT WAVE FORM (HCMOS LOAD) tr tf VOH 90%VDD CL =15pF + mA M #14 + VM - TEST POINT #8 + POWER SUPPLY - VCC OUT OSCILLATOR 0,1µF GND #1 #7 TRI-STATE-INPUT 50%VDD NOTE: CL includes probe and fixture capacitance 10%VDD VOL Th T DUTY=Th/T PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | info@petermann-technik.de 20.57max 4-00.55max 5.08max 7.62+0.1 -