M2350

FEATURES - HIGH RELIABILITY FOR LOW COST - FREQUENCY STABILITY TO +-15 PPM - JITTER OPTIMIZED DIP 8 CLOCK OSCILLATOR - EXCELLENT CLOCK SIGNAL GENERATOR FOR DSP'S AND CPU'S - EXTENDED TEMPERATURE RANGE TO -40/+85°C SERIES PACKAGE FREQUENCY RANGE FREQUENCY STABILITY AGING OPERATING TEMPERATURE RANGE STORAGE TEMPERATURE RANGE VOLTAGE PETERMANN TECHNIK Time & Frequency Components M2350 8 PIN DIP 500.0 kHz ~ 125.0 MHz +-15 ~ +-100 ppm +-5 ppm after first year 0/+70°C ~ -40/+85°C -55/+125°C +3.3 VDC +-10% 15 mA max. < 24.0 MHz INPUT 20 mA max. < 50.0 MHz CURRENT 30 mA max. < 80.0 MHz 40 mA max. < 125 MHz 40/60% STANDARD SYMMETRY 45/55% OPTION 10 ns max. (10% VDD ~ 90% VDD) RISE AND FALL TIME HCMOS OUTPUT 10% VDD max. "0" LEVEL HCMOS 3.3 VOLT 90% VDD min. "1" LEVEL LOAD HCMOS 15 pF STANDARD WITHOUT ENABLE/DISABLE FUNCTION PIN 1 OPTION WITH ENABLE/DISABLE FUNCTION PIN 8 OUTPUT PIN 1 INPUT TRISTATE LOGIC TABLE 2.0V MIN. OR NOT CONNECTED OSCILLATION 0.8V MAX. OR GND HIGH IMPEDANCE PIN CONNECTION SEE OUTLINE DRAWINGS START-UP TIME 10 ms max. PERIOD JITTER RMS 8 ps max. OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION PART NUMBERING SYSTEM EXAMPLE SERIES FREQUENCY STABILITY M2350 BLANK FOR 100 PPM ANY 50 ~ 15 PPM BLANK FOR 0/+70°C N = -10/+60°C M = -20/+70°C W = -40/+85°C BLANK FOR 40/60% S FOR 45/55% BLANK FOR NO E/D E FOR E/D BLANK FOR DIP G FOR GULL WING REQUIRED FREQUENCY M2350-25-W-S-E-G-125.0MHz TEMPERATURE RANGE SYMMETRY PIN 1 ENABLE/DISABLE PIN CONFIGURATION FREQUENCY PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | info@petermann-technik.de PETERMANN TECHNIK Time & Frequency Components OUTLINE DRAWING OF M2350 OUTLINE DRAWING OF M2350 GULL WING 14.98+0.2 #4 #5 6.8max 5.3max 12.7max 0.8 5.5max 4-00.55max 1.14 7.62+0.1 - 1.27+0.127 - 12.7max #1 #4(Grounded to the Case) 12.9max 7.62 #1 0.63+0.1 - #8 Unit: mm #8 #5 7.62 12.9max PIN #1 #4 #5 #8 Connection NC/Tri-State GND Output VDD Unit:mm TEST CIRCUIT FOR HCMOS HCMOS OUTPUT WAVE FORM (HCMOS LOAD) tr tf VOH 90%VDD CL =15pF + mA M #14 + VM - TEST POINT #8 + POWER SUPPLY - VCC OUT OSCILLATOR 0,1µF GND #1 #7 TRI-STATE-INPUT 7.62+0.1 - 50%VDD NOTE: CL includes probe and fixture capacitance 10%VDD VOL Th T DUTY=Th/T PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | info@petermann-technik.de