M2500

FEATURES - HIGH RELIABILITY FOR LOW COST - FREQUENCY STABILITY TO +-15 PPM - JITTER OPTIMIZED DIP 14 CLOCK OSCILLATOR - EXCELLENT CLOCK SIGNAL GENERATOR FOR DSP'S AND CPU'S - EXTENDED TEMPERATURE RANGE TO -40/+85°C PETERMANN TECHNIK Time & Frequency Components M2500 14 PIN DIP 32.768 kHz ~ 125.0 MHz +-15 ~ +-100 ppm +-5 ppm after first year 0/+70°C ~ -40/+85°C -55/+125°C +5.0 VDC +-10% 30 mA max. < 24.0 MHz INPUT 40 mA max. < 50.0 MHz CURRENT 60 mA max. < 80.0 MHz 80 mA max. < 125 MHz STANDARD 40/60% SYMMETRY OPTION 45/55% RISE AND FALL TIME HCMOS 10 ns max. (10% VDD ~ 90% VDD) 10 ns max. (0.4V ~ 2.4V) RISE AND FALL TIME TTL "0" LEVEL 10% VDD max. OUTPUT HCMOS 5.0 VOLT "1" LEVEL 90% VDD min. "0" LEVEL 0.4 V max. TTL 5.0 VOLT "1" LEVEL 2.4 V min. 10 TTL TTL LOAD 15 pF HCMOS WITHOUT ENABLE/DISABLE FUNCTION STANDARD PIN 1 WITH ENABLE/DISABLE FUNCTION OPTION PIN 8 OUTPUT PIN 1 INPUT TRISTATE LOGIC TABLE 2.0V MIN. OR NOT CONNECTED OSCILLATION 0.8V MAX. OR GND HIGH IMPEDANCE PIN CONNECTION SEE OUTLINE DRAWINGS START-UP TIME 10 ms max. PERIOD JITTER RMS 8 ps max. OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION SERIES PACKAGE FREQUENCY RANGE FREQUENCY STABILITY AGING OPERATING TEMPERATURE RANGE STORAGE TEMPERATURE RANGE VOLTAGE PART NUMBERING SYSTEM EXAMPLE SERIES FREQUENCY STABILITY M2500 BLANK FOR 100 PPM ANY 50 ~ 15 PPM BLANK FOR 0/+70°C N = -10/+60°C M = -20/+70°C W = -40/+85°C BLANK FOR 40/60% S FOR 45/55% BLANK FOR NO E/D E FOR E/D BLANK FOR DIP G FOR GULL WING REQUIRED FREQUENCY M2500-25-W-S-E-G-125.0MHz TEMPERATURE RANGE SYMMETRY PIN 1 ENABLE/DISABLE PIN CONFIGURATION FREQUENCY PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | info@petermann-technik.de PETERMANN TECHNIK Time & Frequency Components OUTLINE DRAWING OF M2500 OUTLINE DRAWING OF M2500 GULL WING 6.1max 5.3max 14.98+0.2 7.49+0.1 - #7 #8 0.8 #1 #7(Grounded to the Case) 13.1max 7.62 1.14 7.62+0.1 14.98+0.2 - 0.63+0.1 TYP(4 PLACES) 1.35+0.1 #1 #14 12.95max #14 15.24 #8 20.4max PIN #1 #7 #8 #14 Connection NC/Tri-State GND Output VDD Unit:mm 15.24+0.1 - Unit: mm HCMOS OUTPUT WAVE FORM (HCMOS LOAD) tr tf VOH 90%VDD TEST CIRCUIT FOR HCMOS 50%VDD + mA M #14 + VM TEST POINT #8 10%VDD VOL CL =15pF + POWER SUPPLY - VCC OUT OSCILLATOR 0,1µF GND #1 #7 TRI-STATE-INPUT Th T DUTY=Th/T NOTE: CL includes probe and fixture capacitance TTL OUTPUT WAVE FORM TEST CIRCUIT FOR TTL (TTL LOAD) tr tf VOH + mA M #14 + VM TEST POINT #8 RL =390 2.4V + POWER SUPPLY - VDD OUT OSCILLATOR 0,1µF GND #1 #7 TRI-STATE-INPUT 1.4V CL=15pF 1N4148 or Equiv 0.4V VOL Th T DUTY=Th/T NOTE: CL includes probe and fixture capacitance PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | info@petermann-technik.de 20.57max 4-00.55max 5.08max 7.62+0.1 -